Hello, could you tell me please, the DEV fee is mining ETH? or the same coin, which I mine now???
I mine musicoin, should I enter ETH or MUSIC wallet to BAT file?
thx
Topic: Ethereum Mining NoDevFee 0% v15.0 🔥 - page 5. (Read 164839 times)
Hi,
Curious to know, I am currently mining on Whalesburg pool. Currently When the dev fee kicks in it stops all mining recreates the dag file and then mines to another pool. If I was to use this for would it stop that and send the dev fee to the Whalesburg pool I'm currently mining on?
Thanks!
Curious to know, I am currently mining on Whalesburg pool. Currently When the dev fee kicks in it stops all mining recreates the dag file and then mines to another pool. If I was to use this for would it stop that and send the dev fee to the Whalesburg pool I'm currently mining on?
Thanks!
I haven't try that but based on my understanding of how this tool works, it'll still disconnect from your pool in order to connect to the dev's pool.
What this does is spoof your Ethereum address in place of the Dev's address.
Hi,
Curious to know, I am currently mining on Whalesburg pool. Currently When the dev fee kicks in it stops all mining recreates the dag file and then mines to another pool. If I was to use this for would it stop that and send the dev fee to the Whalesburg pool I'm currently mining on?
Thanks!
Curious to know, I am currently mining on Whalesburg pool. Currently When the dev fee kicks in it stops all mining recreates the dag file and then mines to another pool. If I was to use this for would it stop that and send the dev fee to the Whalesburg pool I'm currently mining on?
Thanks!
does it work with CM11 ?
I wait for a longtime, but dont see 2nd line fake devfee.
It's random, that's why. If you got 1 message for devfee, then it works.I wait for a longtime, but dont see 2nd line fake devfee.
As I said in my last post, in 5 hours I had 9 DevFee shares out of 342 total shares, that's 2,63% fee of my shares.
In your screenshot you had 1 DevFee out of 50 shares, which is exactly 2%. I imagine you only run the miner for an hour or so though? That's a pretty small sample to draw any conclusions.
V8 dont working ( on the pool i cannot see worker X
does it work with CM11 ?
I wait for a longtime, but dont see 2nd line fake devfee.
I wait for a longtime, but dont see 2nd line fake devfee.
Yes it works with claymore v11.0
If you originally have 3 workers on your pool. You should have 4 workers after using this.
I used version 8. The older version didn't work.
does it work with CM11 ?
https://uphinhnhanh.com/images/2018/02/18/nodevfeei.png
I wait for a longtime, but dont see 2nd line fake devfee.
https://uphinhnhanh.com/images/2018/02/18/nodevfeei.png
I wait for a longtime, but dont see 2nd line fake devfee.
It's interesting to see how many shares I was actually losing to DevFee... it's still a small sample I've got but in 5 hours I had 9 Dev shares out of 342 total shares.
Works insane!
Before at webstat I see 11,7-11,8MH/s with 1 test card. With this always 12,0xx. On ethermine.org I see always a little time "default" named rig and my too. This will be the small % devfee.
But why no update this superb software, only with claymore 10.0 working...
This can't be right. I use it on 10.6 and it works fine, I also see the "default" rig in ethermine.org as you said. Before at webstat I see 11,7-11,8MH/s with 1 test card. With this always 12,0xx. On ethermine.org I see always a little time "default" named rig and my too. This will be the small % devfee.
But why no update this superb software, only with claymore 10.0 working...
Works insane!
Before at webstat I see 11,7-11,8MH/s with 1 test card. With this always 12,0xx. On ethermine.org I see always a little time "default" named rig and my too. This will be the small % devfee.
But why no update this superb software, only with claymore 10.0 working...
Before at webstat I see 11,7-11,8MH/s with 1 test card. With this always 12,0xx. On ethermine.org I see always a little time "default" named rig and my too. This will be the small % devfee.
But why no update this superb software, only with claymore 10.0 working...
I started mining 2 weeks ago, 1 week i mined around 0,0153 eth (my pc was turned on for 5 whole days) without this program, second week i was mining 7 days with this program and i got only 0,0138 eth. idk it seems fishy
Did you realize that the ETH difficulty has increased a lot recently?
which app. exactly?
Quote
hash rate was always low with that program (17mh/s). withoout it i get normal 20mh/s.
which hash rate? on the miner? on the pool?
I started mining 2 weeks ago, 1 week i mined around 0,0153 eth (my pc was turned on for 5 whole days) without this program, second week i was mining 7 days with this program and i got only 0,0138 eth. idk it seems fishy
Did you realize that the ETH difficulty has increased a lot recently?
Let's try how that works.
The best practice from the developer's side which I like is the way Fireice UK published his XMR Stak miner.
He put a 2.0% fee on it, called it "donation" and gave instructions on how to change the donation from the source code and compile the miner yourself. That way I'm able to choose and I'm mining at 0.5% fee.
The best practice from the developer's side which I like is the way Fireice UK published his XMR Stak miner.
He put a 2.0% fee on it, called it "donation" and gave instructions on how to change the donation from the source code and compile the miner yourself. That way I'm able to choose and I'm mining at 0.5% fee.
I started mining 2 weeks ago, 1 week i mined around 0,0153 eth (my pc was turned on for 5 whole days) without this program, second week i was mining 7 days with this program and i got only 0,0138 eth. idk it seems fishy
Did you realize that the ETH difficulty has increased a lot recently?
Does it work with claymore v10.6?
Please may i know how to check when NoDevFee is mining to my wallet where's it's going. I've kept it since few days a single GPU GTX 1070 and im using NiceHash Legacy while running NoDevFee in parallel. Is there any pool or any place to check by ETH address. I've tried few like etherscan and nanopool but so far nothing. I kept NoDevFee app running since 2-3 days.
2nd: Sometimes it shows This time is real DevFee mining next time will mine to you, what does it mean?!
2nd: Sometimes it shows This time is real DevFee mining next time will mine to you, what does it mean?!
My screens do not match the YouTube video. The NoFee window simply displays the single line "Your DevFee mining to 0x1ccc..." The screen never changes from that. I do not see the Fake Mining updates as seen in the YouTube video. I realize the video is an older verion of the software but does the current version update every time a devfee round hits?
Dual mining ETH and PASC to Nanopool. My NoFee bat file is:
start NoDevFee.exe 0x1cccxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 9999
This is correct according to the instructions. Should I launch NoFee before or after the miner starts? The only shares that show in Nanopool are from named miners. No shares from unnamed miners yet as described by the author.
Here is my miner bat commands:
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x1cccxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/Miner -dcri 31 -dbg -1 -esm 0 -estale 1 -mode 0 -mport 0 -dpool stratum+tcp://pasc-us-east1.nanopool.org:15555 -dwal 86646-64.xxxxxxxxxxxxxxxx.Miner -dpsw x -dcoin pasc -ftime 7 -allpools 1
By the way, might wanna change that to "You're."
Dual mining ETH and PASC to Nanopool. My NoFee bat file is:
start NoDevFee.exe 0x1cccxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 9999
This is correct according to the instructions. Should I launch NoFee before or after the miner starts? The only shares that show in Nanopool are from named miners. No shares from unnamed miners yet as described by the author.
Here is my miner bat commands:
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x1cccxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/Miner -dcri 31 -dbg -1 -esm 0 -estale 1 -mode 0 -mport 0 -dpool stratum+tcp://pasc-us-east1.nanopool.org:15555 -dwal 86646-64.xxxxxxxxxxxxxxxx.Miner -dpsw x -dcoin pasc -ftime 7 -allpools 1
By the way, might wanna change that to "You're."
Hi
Have you tried this version without fees? https://github.com/d3z00r/claymore10.3-no-fee
I do not know if I can trust the download link, it seems serious.
Have you tried this version without fees? https://github.com/d3z00r/claymore10.3-no-fee
I do not know if I can trust the download link, it seems serious.
it's scam, don't use it.
i wish i did read your message before ....
The Claymore version is mining to this wallet 0x8ea66b8c38738802224734604af74edb5bbccb5c ( https://eth.nanopool.org/account/0x8ea66b8c38738802224734604af74edb5bbccb5c )
How much does the developer get?
I started mining 2 weeks ago, 1 week i mined around 0,0153 eth (my pc was turned on for 5 whole days) without this program, second week i was mining 7 days with this program and i got only 0,0138 eth. idk it seems fishy
Hi
Have you tried this version without fees? https://github.com/d3z00r/claymore10.3-no-fee
I do not know if I can trust the download link, it seems serious.
Have you tried this version without fees? https://github.com/d3z00r/claymore10.3-no-fee
I do not know if I can trust the download link, it seems serious.
it's scam, don't use it.
i wish i did read your message before ....
The Claymore version is mining to this wallet 0x8ea66b8c38738802224734604af74edb5bbccb5c ( https://eth.nanopool.org/account/0x8ea66b8c38738802224734604af74edb5bbccb5c )
Jump to: