Topic: [ETHEREUM] [POOL] https://ETH.suprnova.cc 0% fee, 20 % BONUS per Block ! // - page 25. (Read 99527 times)

The calc says 0.65 for that card.. Hmm.. The diff and nethash spiked like crazy over the last 30h maybe it was bad luck or variance, a few days ago you would have made double that amount in a day... Hard to say but its not too far away imho

I have been running a R9 270 with Suprnova, but i have been getting aprox 0.51 Eth/day, seems a little off.

Hey Aussies, finally a node for Australia:

https://eth-au.suprnova.cc:3000/YourUsername.Worker/Hashrate

Of course "stratum"-Proxy enabled



Setting up the proxy is actually quite simple (linux):

apt-get install golang build-essential

then:

export GOPATH=$HOME/go

Install required packages:

go get github.com/ethereum/ethash
go get github.com/ethereum/go-ethereum/common
go get github.com/goji/httpauth
go get github.com/gorilla/mux
go get github.com/yvasiyarov/gorelic

git clone https://github.com/sammy007/ether-proxy.git

Compile:

cd ether-proxy
go build -o ether-proxy main.go

And you should have "ether-proxy" in that dir now. Just edit the config.json with the credentials of your suprnova account, start the proxy and point the rigs to the proxy and you're good to go.

A valid pool config portion for the proxy would look like this, here you have all nodes as failover configured:



{


   "upstreamCheckInterval": "5s",
   "upstream": [
      {
         "pool": true,
         "name": "Suprnova ETH Australia",
         "url": "http://eth-au.suprnova.cc:3000/john.1/20",
         "timeout": "10s"
      },
      {
         "pool": true,
         "name": "Suprnova ETH EUrope",
         "url": "http://eth-mine.suprnova.cc:3000/john.1/20",
         "timeout": "10s"
      },
      {
         "pool": true,
         "name": "Suprnova ETH United States",
         "url": "http://eth-us.suprnova.cc:3000/john.1/20",
         "timeout": "10s"
      },
      {
         "pool": true,
         "name": "Suprnova ETH High Diff Port",
         "url": "http://eth-high.suprnova.cc:3000/john.1/20",
         "timeout": "10s"
      },
      {
         "pool": true,
         "name": "Suprnova ETH Asia Pacific ",
         "url": "http://eth-apac.suprnova.cc:3000/john.1/20",
         "timeout": "10s"
      },
      {
         "pool": true,
         "name": "Suprnova EXPanse Pool ",
         "url": "http://exp.suprnova.cc:3000/john.2/20",
         "timeout": "10s"
      }
   ],

}



More info and windows versions here:

git clone https://github.com/sammy007/ether-proxy.git

i can not config proxy and mine file bat

my amd sapphire 390x Oc

yes average of 14mh  AMD Radeon (TM) R9 200 Series

Check my website mate

http://62.212.74.86/~mining/list/amd/index.php?algo=eth

It's in there

Just click the config button to get some more info.

please kindly let 280x running config for windows, thanks

Hi !

Setting up the proxy is actually quite simple (linux):

apt-get install golang build-essential

then:

export GOPATH=$HOME/go

Install required packages:

go get github.com/ethereum/ethash
go get github.com/ethereum/go-ethereum/common
go get github.com/goji/httpauth
go get github.com/gorilla/mux
go get github.com/yvasiyarov/gorelic

git clone https://github.com/sammy007/ether-proxy.git

Compile:

cd ether-proxy
go build -o ether-proxy main.go

And you should have "ether-proxy" in that dir now. Just edit the config.json with the credentials of your suprnova account, start the proxy and point the rigs to the proxy and you're good to go.

Valid config would look like:



{


   "upstreamCheckInterval": "5s",
   "upstream": [
      {
         "pool": true,
         "name": "Suprnova ETH",
         "url": "http://eth-high.suprnova.cc:3000/john.1/20",
         "timeout": "10s"
      },
      {
         "pool": true,
         "name": "Suprnova EXP",
         "url": "http://exp.suprnova.cc:3000/john.2/20",
         "timeout": "10s"
      }
   ],

}



More info and windows versions here:

git clone https://github.com/sammy007/ether-proxy.git


Regarding Australia, I guess the Singapore node is faster than the US node, you may want to try https://eth-apac.suprnova.cc
If you're still having trouble and if there is enough interest, I can also start a node in Sydney, which would probably be best for the Aussies



Earnings is a bit "noisy" - yes, as you'd have to add the bonuses etc. "by hand". I'll add some more stats shortly !

Hi. It seems that timezone settings not working. I'm setting it to my timezone, but in transactions page it shows wrong datetime.
Also it would be very conveniently to see graph with earnings per day like on other pools. Right know it is hard to see how much i've earned, because "Last Day" row in "earnings" page shows unclear values.
Thank you!

sweet, thanks OC,
I personally dont mind about bonuses, you have always been a fair man to me.
tommoro ill hook up some more gear.

Thankyou again.

could be 14.4 tho, will check in tommoro

Yup sounds good for one card.

Concerning the bonuses I will be doing some More bonuses when my rigs are back up and Running, I currently rented them all for a longer Period  so I simply have no income for the bonuses at the moment.

Graphics Chipset

Anyone ?

AMD Radeon (TM) R9 200 Series

mine is running      29.8 mh

is this ok for this card please. (or can i get an extra 0 on the end of 29 )

Sure, i never said i was unhappy.

I'm just asking a question.


+ this is not an attack. Suprnova is the most stable pool i've mined at. So i'm only positive about it.

But seeing my income drop from 8eth every 6 hrs to 8eth every 9-10hrs is a somewhat decent difference. (and yes i checked difficulty and block time....)

Could be a coincidence, but the bonus dropped from 20% to 5% when the price suddenly went up (and not by a little bit..).


Simple business.

I'm not going to go buy a Bottle of Milk at store A where it costs 5$ when i can buy that exact same bottle at another store for 3$.

Or i'm not going to do a job somewhere where i get paid 15$/hr when i can do that exact same job for 20$/hr somewhere else.

you can be happy that he's even offering some bonus...

Ocminer, you have a very good and stable pool here.

The only thing that isn't as stable is your bonus system.

When the price was @ 0.002ish you bumped up the bonus to 20%

Now that the price has doubled you pushed it down to 5%

Could you elaborate on that?


I'm somewhat disappointed by this and i won't be surprised if others are disappointed by this as well.


Thx

Maybe renew the DAG file AS this is the most common issue with ETH.

Delete it from the ethash dir and it will get auto recreated at next startup

Heyy.

Started searliously mining with you guys for a month now.
My hashrate is fluctuating going anywhere from 8MH/s to 40MH/s. Average seems to be a little below 20MH/s. This is a little less than what I should get on my R9 290X. (around 24MH/s)
Any idea what's the problem?

I already tried changing the hashrate value in the startup command.

Thanks

Hmm it's actually quite simple:

apt-get install golang build-essential

then:

export GOPATH=$HOME/go

Install required packages:

go get github.com/ethereum/ethash
go get github.com/ethereum/go-ethereum/common
go get github.com/goji/httpauth
go get github.com/gorilla/mux
go get github.com/yvasiyarov/gorelic

git clone https://github.com/sammy007/ether-proxy.git

Compile:

cd ether-proxy
go build -o ether-proxy main.go

And you should have "ether-proxy" in that dir now

Is there a super easy walkthrough for setting up the proxy on ubuntu 14.04? Sorry if this is a lame question but I'm stuck on everything after downloading the initial parts from github (basically step 2 onward).

Thanks!