Topic: [ETHEREUM] [POOL] https://ETH.suprnova.cc 0% fee, 20 % BONUS per Block ! // - page 21. (Read 99491 times)

As far as I know, I am not using a proxy. Like the batch file states this rig is dialing straight into suprnova. What I am looking for is a command similar to when sgminer uses the command device = 0, 2, 3.

Do you have ethminer on the same computer as your proxy?

Let's say I need to troubleshoot a GPU on Win7-64 with ethminer.

I want to only start GPU 0, 2, and 3.  What is the command line config in a batch file to do that?

I know this isolates one card, GPU3, but I cannot figure out how to add 0, and 2:

ethminer -G --opencl-device 3 -F http://eth-us.suprnova.cc:3000/USER.1/24 -G --cl-local-work 256 --cl-global-work 8192



Thanks.

First off, thanks to OC for the great pool!  I've been mining at Suprnova for about 6 weeks now and have yet to successfully get Sammy's proxy mining working.  I believe I have the proxy set up correctly as it is receiving new blocks, but I cannot get ethminer to connect to the proxy.  All I get is JSON-RPC problems.  I suppose I just haven't yet found the super dumbed-down version of the instructions.  Thanks in advance for any assistance!

I am attempting to launch ethminer with this:  ethminer -G -F http://127.0.0.1:8546 --opencl-platform 1

What changes should be made if my proxy config looks like this:

{
   "threads": 2,

   "proxy": {
      "listen": "0.0.0.0:8546",
      "clientTimeout": "3m",
      "blockRefreshInterval": "100ms",
      "hashrateWindow": "15m",
      "submitHashrate": false,
      "luckWindow": "24h",
      "largeLuckWindow": "72h"
   },

   "frontend": {
      "listen": "0.0.0.0:8080",
      "login": "admin",
      "password": ""
   },


   "upstreamCheckInterval": "5s",
   "upstream": [
      {
         "pool": true,
         "name": "Suprnova ETH United States",
         "url": "http://eth-us.suprnova.cc:3000/mikesheadroom.02/20",
         "timeout": "10s"
      },
      {
         "pool": true,
         "name": "Suprnova ETH Australia",
         "url": "http://eth-au.suprnova.cc:3000/mikesheadroom.02/20",
         "timeout": "10s"
      },
      {
         "pool": true,
         "name": "Suprnova ETH EUrope",
         "url": "http://eth-mine.suprnova.cc:3000/mikesheadroom.02/20",
         "timeout": "10s"
      },
           {
         "pool": true,
         "name": "Suprnova ETH High Diff Port",
         "url": "http://eth-high.suprnova.cc:3000/mikesheadroom.02/20",
         "timeout": "10s"
      },
      {
         "pool": true,
         "name": "Suprnova ETH Asia Pacific ",
         "url": "http://eth-apac.suprnova.cc:3000/mikesheadroom.02/20",
         "timeout": "10s"
      },
      {
         "pool": true,
         "name": "Suprnova EXPanse Pool ",
         "url": "http://exp.suprnova.cc:3000/mikesheadroom.02/20",
         "timeout": "10s"
      }
   ],

   "newrelicEnabled": false,
   "newrelicName": "MyEtherProxy",
   "newrelicKey": "SECRET_KEY",
   "newrelicVerbose": false
}

Hey,

Not sure about other rigs, but I can 100% assure you that rigs Pies2, Pies3, Pies4, Pies5 and Pies6 (rig ids: 959, 960, 961, 962 and 974) have very accurate hashrate at rigs.online

Please, recommend me the version of AMD driver for GPU mining. With 14.9 I have 138M, but with 15.12 only 100M. Does anybody know which is the best?

yeah we really need mining rig rentals to unleash some dagger rigs, not sure why they havent yet. must be scared lol

Is it possible to get from 7970 more than 25Mh/s?

Yeah DO NOT rent from there. I've rented twice: once for 18 hours at 620 MH/s and once for 24 hours at 420 MH/s. I was never given any of the Ethereum that was mined and never refunded any bitcoin for renting the miners. I have contacted the admin 3 or 4 times and never get a reply. Save your BTC and rent somewhere else. Rigs.Online is a scam for sure. Really can't believe the link is allowed on the front page of the pool.

Hey so, 75 is what you would have gotten at launch when the DAG was like 800 MB.  The DAG is now like 1.35 GB...performance of a 7970 has gone from 25 ish to about 16...so I think you should be able to get 48 at this point.

It's pretty close to what I'm mining as well.  Here's the the thread where he posted it and explained the part about the orphans https://bitcointalksearch.org/topic/m.13696164

I'm pretty sure I mined orphans when I was solo mining.  I even had ether show up in my wallet and only to disappear later or when I would restart geth.  I think this was happening because my geth was barely connected to 1 peer and the latency was too long.  I later manually opened up ports and used the maxpeer and cache arguments to get 25 peers but my variance still seemed to wide because of the influx of new miners due to the recent price increase.

Thanks for the link, that seems much closer to what I was seeing on the pool. I never thought to consider orphans, since I've never had one as far as I can tell while solo mining in over 450 blocks.

I was using: http://etherscan.io/ether-mining-calculator

Got lucky after going back to solo, hit 2 blocks and an uncle within an hour of switching.

Just curious, which calculator are you using?  This one seems to be pretty accurate, it takes orphans into consideration:

http://karldiab.com/EthereumMiningCalculator/

Still earning 25% less than I should be, whether using proxy or not. Back to solo I go.

Your host should be

HOST = "0.0.0.0" (if miners and proxy are on the same network)

and delete the farm recheck stuff

ethminer -G -F http://Your.Local.IP.AddressOfProxy:8080/RigName

if ethminer is on the same computer as the proxy then use 127.0.0.1

Your main pool is the same as your backup pool too.  Give ocminer some love

Me, too.  Exact same problem.

I'm using win7 x64 and I get these errors every week JSON-RPC problem. Probably couldn't connect. Retrying in 1...
The only thing I can do, stop miner, delete dags, restart then its ok for a few days. The gpus do no crash, driver is 15.7.1, what is the problem? (i'm on supernova pool)

I've rented there and the math worked out +/-5% or better.

My problem is I have 3 7970's and I'm only getting 38 MH/s. I was expecting 75. It's all good gear. I'm a reader since 2012, but this time I can't find any info.

Hey, I think you're missing a single dash "-" between "--farm" and "recheck"... it should be --farm-recheck

This is my config for eth-proxy:
And I'm not exactly sure what you mean by config for ethminer, because I just start it with command line:    Note:  I can't seem to add '200' in the command after the farm recheck because I get a 'argument error'.

Is there a config file for ethminer, and where would it be?  in the .ethereum directory or .ethash directory I don't find config files.

I appreciate the help.  I am currenly mining for ethpool with qtminer, but I am wanting to switch pools and mine directly using ethminer and my own stratum proxy because I think I will get increased payouts.