Suprnova closes eth.suprnova.cc
Because of the recent developments concerning the soft/hard fork discussion because of the DAO Hack and the decisions by the Dev's, I've decided to close the Ethereum Pool as I think ETH does not comply with the idea of irreversible, uncensored blockchain technology.
ETH is still a brilliant coin (or rather a technology) with most likely a bright future because of all the funding invested the clever dev's attached and all the possibilites with Smart Contracts etc. Of course mine it if its profitable for you, or not if you don't like the whole (changed) idea behind it.
The Pool will remain running until the fork occurs, as there are plenty of pools already it should be pretty easy to move over. It was a pleasure being one of the first pools available for ETH and I enjoyed working with the technology.
Please move your miners to the other pools, it was great to have you on suprnova, check the main page, lots of other coins are listed there too or just PM me if you find a coin that is not listed. https://www.suprnova.cc
Thanks !
Topic: [ETHEREUM] [POOL] https://ETH.suprnova.cc 0% fee, 20 % BONUS per Block ! // - page 7. (Read 99524 times)
June 27, 2016, 09:51:46 AM
June 21, 2016, 06:44:00 AM
people
through his run, throw settings
I have Windows 7
programs, how to set
it is advisable to detail.
through his run, throw settings
I have Windows 7
programs, how to set
it is advisable to detail.
June 15, 2016, 07:16:52 AM
are you planning to open the feathercoin pool anytime soon? because apparently there is an entity with 500M that is solo mining or something, a private pool most likely chinese
other pool are too tiny to even find block on a regular bases
other pool are too tiny to even find block on a regular bases
May 28, 2016, 11:08:44 PM
i can not config proxy for exp help me
May 27, 2016, 11:09:52 PM
ocminer whats happening with XMG pool? Seems down..
May 27, 2016, 12:00:59 PM
There have been no responses on this page in 5 days and I am wondering why not. I have my payouts threshold set and should have received 3 payments by now and I have squat. Is this pool still active?
May 22, 2016, 05:22:43 AM
Hello,
I have a same problem that "Robertdupont".
I mine with two computers. Concerning the one, I have a R9 380 and that works well. But, the second, I have a R9 390x and it does not work.
I none did not go back up on eth.supernova.cc . My worker is noted as inactive. Yet, I mine at 20 MH/s
Have you ideas ?
Thank you in advance
Log :
I posted this yesterday in the Eth thread: I will try older drivers and see what happens, Thx
EDIT: I did log into Decred pool on Supr, and everything is normal... issue seems limited to only eth/algo
Last Edit: Got rid of 16xxx and reinstalled 15xxx Crimson drivers, that did the trick. Hash rate now showing on its assigned worker on Suprnova!
THX!
I have a same problem that "Robertdupont".
I mine with two computers. Concerning the one, I have a R9 380 and that works well. But, the second, I have a R9 390x and it does not work.
I none did not go back up on eth.supernova.cc . My worker is noted as inactive. Yet, I mine at 20 MH/s
Have you ideas ?
Thank you in advance
Log :
I posted this yesterday in the Eth thread: I will try older drivers and see what happens, Thx
Quote
Odd circumstance here,,, any ideas?
Just installed 3- R9 290's in a rig previously occupied by 3 - 7950's.
Went ahead and updated drivers etc. All 3 cards are recognized by system. started hashing, all 3 cards show work and all seems fine. However I am not seeing any hash on the assigned worker in supernova pool.
All other rigs/workers hashing fine as normal and showing hash on pool.... ok, at wits end here... I have always mined with 280x's and 7970's and 7950's.. is there anything different here with 290's I am missing?
Any suggestions appreciated
THX
Just installed 3- R9 290's in a rig previously occupied by 3 - 7950's.
Went ahead and updated drivers etc. All 3 cards are recognized by system. started hashing, all 3 cards show work and all seems fine. However I am not seeing any hash on the assigned worker in supernova pool.
All other rigs/workers hashing fine as normal and showing hash on pool.... ok, at wits end here... I have always mined with 280x's and 7970's and 7950's.. is there anything different here with 290's I am missing?
Any suggestions appreciated
THX
EDIT: I did log into Decred pool on Supr, and everything is normal... issue seems limited to only eth/algo
Last Edit: Got rid of 16xxx and reinstalled 15xxx Crimson drivers, that did the trick. Hash rate now showing on its assigned worker on Suprnova!
THX!
May 20, 2016, 11:43:36 PM
Im using newest amd driver with no problems. 2x 280x
May 20, 2016, 01:37:35 AM
I solved my problem
you must use an earlier version of amd catalyst.
15.xx -> OK
16.xx -> No Ok
++
you must use an earlier version of amd catalyst.
15.xx -> OK
16.xx -> No Ok
++
Hello,
I have a same problem that "Robertdupont".
I mine with two computers. Concerning the one, I have a R9 380 and that works well. But, the second, I have a R9 390x and it does not work.
I none did not go back up on eth.supernova.cc . My worker is noted as inactive. Yet, I mine at 20 MH/s
Have you ideas ?
Thank you in advance
Log :
http://nsa38.casimages.com/img/2016/05/18/160518110658661761.jpg
I have a same problem that "Robertdupont".
I mine with two computers. Concerning the one, I have a R9 380 and that works well. But, the second, I have a R9 390x and it does not work.
I none did not go back up on eth.supernova.cc . My worker is noted as inactive. Yet, I mine at 20 MH/s
Have you ideas ?
Thank you in advance
Log :
http://nsa38.casimages.com/img/2016/05/18/160518110658661761.jpg
May 18, 2016, 03:31:16 PM
Hi, help me, how to start ether-proxy(sammy007)
May 18, 2016, 03:57:41 AM
Hello,
I have a same problem that "Robertdupont".
I mine with two computers. Concerning the one, I have a R9 380 and that works well. But, the second, I have a R9 390x and it does not work.
I none did not go back up on eth.supernova.cc . My worker is noted as inactive. Yet, I mine at 20 MH/s
Have you ideas ?
Thank you in advance
Log :
http://nsa38.casimages.com/img/2016/05/18/160518110658661761.jpg
I have a same problem that "Robertdupont".
I mine with two computers. Concerning the one, I have a R9 380 and that works well. But, the second, I have a R9 390x and it does not work.
I none did not go back up on eth.supernova.cc . My worker is noted as inactive. Yet, I mine at 20 MH/s
Have you ideas ?
Thank you in advance
Log :
http://nsa38.casimages.com/img/2016/05/18/160518110658661761.jpg
May 17, 2016, 02:40:55 PM
Pool this problem with the coins are Unconfirmed somen and then not go to Confirmed
May 10, 2016, 02:00:48 AM
when feathercoin pool will be back? other pool seems have issue with orphan i don't like them, please restore this, thank you
May 09, 2016, 10:56:51 PM
I'm mining on the low diff port for Eth with a single 7950.. Was working fine for a while but now showing nothing pool side. I've regenerated the DAG but still no luck.
May 09, 2016, 08:11:20 AM
Hey everyone I've been at it for 3 days and nights . my hands are killing me . i am on and hashing https://i.imgur.com/c6TkrjZ.png
how can I increase the output of my card 960m on skylake i7 16gb ram?
Thank you all , I'm very gratified with the results of my work and it's great to be in the Ether
how can I increase the output of my card 960m on skylake i7 16gb ram?
Thank you all , I'm very gratified with the results of my work and it's great to be in the Ether
May 08, 2016, 07:47:41 AM
the last two hours there are problems the pool !!! 
I wish I could mine on a pool lol
uses etherminer version = ethminer-0.9.41-Windows 64-bit ??
if you do not want to configure anything you can try on https://ethpool.org writing
ethpool.bat file = ethminer -F http://ethpool.org/miner/adress eth.worker1/50 -G
and wait a while to see your miners
but when I list devices it shows 2 GPUs which would be correct as I am trying to mine with an XFX R9 295x2 which is 2 chips like having 2x 4gb R9 290x's http://i219.photobucket.com/albums/cc271/baz80/Untitled_zpsxxfisw0e.jpg
try to check on handling video cards and disable devices in case that integrated into the processor or motherboard ..... probably see for the first one that does not have enough memory
been in to the bios to make sure only PCIe is on and not intel HD/integrated and I am still having the same error :/ I think maybe I should just forget it lol
tried to change video card with something more 'simple type radeon hd 7870 (12 MHs)
... Or else to try it depends on video card !!
https://www.cryptocompare.com/mining/#/equipmentI am not sure what you mean change my video card? this is the same as my GPU now https://www.cryptocompare.com/mining/sapphire/radeon-r9-295x2-ethereum-mining/ apart from mine is XFX
Ok I now have my ethminer seeing my GPU and mining on solo with this .bat file
ethminer -F http://ethpool.org/miner/0xe85C6B78abc7D66fb0D04A3d6BbD22C35bE2803F.worker1/50 -G --opencl-platform 1
how do I change the bat file so I can mine on suprnova please?
Massive thank you for all the help
::EDIT::
AMD Crossfire was ticked so unticked and I am hashing at 89mhs on suprnova so hopefully I will start to see some Eth in my wallet soon :p
Hello oncloud9,
Having exactly the same problem you are having, except that I can't find the Switch to switch off the crossfire option in Catalyst.
Would you mind letting me/us know which Catalyst version are you using?
Best regards!
May 05, 2016, 12:22:31 PM
Yes with CPU... 16 cors....
I'm new in crypto currency mining
So mabay I have to try with altcoin made to mine with CPU
I'm new in crypto currency mining
So mabay I have to try with altcoin made to mine with CPU
I think you would get a much higher payout mining a CPU only coin. Right now I am getting a good return on Hodl.
May 04, 2016, 02:41:09 PM
Yes with CPU... 16 cors....
I'm new in crypto currency mining
So mabay I have to try with altcoin made to mine with CPU
I'm new in crypto currency mining
So mabay I have to try with altcoin made to mine with CPU
May 04, 2016, 07:17:53 AM
Hi
I'm don't understand, I mined over 12 hours and I have nothing in my account, not transactions an no earning
I use this commande line : ethminer -C -F http://eth-mine.suprnova.cc:3000/username.worker/700/s
And the command line give print this :
abc@abc:~$ ethminer -C -F http://eth-mine.suprnova.cc:3000/username.worker/700/s
miner 22:03:42.882|ethminer Getting work package...
miner 22:03:43.035|ethminer Grabbing DAG for #17a7217f…
miner 22:03:50.264|ethminer Got work package:
miner 22:03:50.264|ethminer Header-hash: 8e669abd4cf6c69ab4610fbb052a7e25590e0b287522328767130a99c47c09f5
miner 22:03:50.264|ethminer Seedhash: 17a7217f2673ce6267021cc82e7b328a755f010d6741bde6c25d3c2b0373e989
miner 22:03:50.264|ethminer Target: 0000000394427b08175efa9a9eb59b9123e2969bf19bf272b20787ed022fbe6c
miner 22:03:50.264|ethminer Loading full DAG of seedhash: #95d53b63…
miner 22:03:50.781|ethminer Mining on PoWhash #8e669abd… : 0 H/s = 0 hashes / 0.5 s
miner 22:03:57.162|ethminer Full DAG loaded
miner 22:03:57.192|ethminer Got work package:
miner 22:03:57.192|ethminer Header-hash: 403bb72c4562db405b7dda98d2ca37f07888b4c3acab36200193702d1cd4afeb
miner 22:03:57.192|ethminer Seedhash: 17a7217f2673ce6267021cc82e7b328a755f010d6741bde6c25d3c2b0373e989
miner 22:03:57.192|ethminer Target: 0000000394427b08175efa9a9eb59b9123e2969bf19bf272b20787ed022fbe6c
miner 22:03:58.045|ethminer Mining on PoWhash #403bb72c… : 894800 H/s = 447400 hashes / 0.5 s
miner 22:03:58.614|ethminer Mining on PoWhash #403bb72c… : 703866 H/s = 400500 hashes / 0.569 s
Somethings is wrong ?
To see my the coin inside my wallet, I use geth console 2>>geth.log
then
web3.eth.getBalance(web3.eth.accounts[0])
you mine with 800KH/sI'm don't understand, I mined over 12 hours and I have nothing in my account, not transactions an no earning
I use this commande line : ethminer -C -F http://eth-mine.suprnova.cc:3000/username.worker/700/s
And the command line give print this :
abc@abc:~$ ethminer -C -F http://eth-mine.suprnova.cc:3000/username.worker/700/s
miner 22:03:42.882|ethminer Getting work package...
miner 22:03:43.035|ethminer Grabbing DAG for #17a7217f…
miner 22:03:50.264|ethminer Got work package:
miner 22:03:50.264|ethminer Header-hash: 8e669abd4cf6c69ab4610fbb052a7e25590e0b287522328767130a99c47c09f5
miner 22:03:50.264|ethminer Seedhash: 17a7217f2673ce6267021cc82e7b328a755f010d6741bde6c25d3c2b0373e989
miner 22:03:50.264|ethminer Target: 0000000394427b08175efa9a9eb59b9123e2969bf19bf272b20787ed022fbe6c
miner 22:03:50.264|ethminer Loading full DAG of seedhash: #95d53b63…
miner 22:03:50.781|ethminer Mining on PoWhash #8e669abd… : 0 H/s = 0 hashes / 0.5 s
miner 22:03:57.162|ethminer Full DAG loaded
miner 22:03:57.192|ethminer Got work package:
miner 22:03:57.192|ethminer Header-hash: 403bb72c4562db405b7dda98d2ca37f07888b4c3acab36200193702d1cd4afeb
miner 22:03:57.192|ethminer Seedhash: 17a7217f2673ce6267021cc82e7b328a755f010d6741bde6c25d3c2b0373e989
miner 22:03:57.192|ethminer Target: 0000000394427b08175efa9a9eb59b9123e2969bf19bf272b20787ed022fbe6c
miner 22:03:58.045|ethminer Mining on PoWhash #403bb72c… : 894800 H/s = 447400 hashes / 0.5 s
miner 22:03:58.614|ethminer Mining on PoWhash #403bb72c… : 703866 H/s = 400500 hashes / 0.569 s
Somethings is wrong ?
To see my the coin inside my wallet, I use geth console 2>>geth.log
then
web3.eth.getBalance(web3.eth.accounts[0])
With you CPU ?!?
In theory, you'll get as much as 0.010 ether per day.
But I doubt you will find any share at all. Speed is way too small for the difficulty...
May 04, 2016, 07:13:16 AM
Very bad
Jump to: