Topic: ethOS - Ethereum Mining Platform - page 6. (Read 94540 times)

I appreciate everyone's chiming in. At the same time no one's taken the time to (carefully) read what I've written and we're really going down the wrong path here.  As written previously:

The rig was updated to 1.3.1.
The rig boots and hashes fine.
The Chromium window is unresponsive. and blank/black.
The "browser" command works.
The menu shortcut works.
After a while a notification pops up that says "Page unresponsive". This is also blank/black.

The info posted is helpful, just not applicable. I'm re-writing this so that if someone else searches they can see that they were not the only person with the problem.  Also re-writing for the sake of showing that we can help each other better when we read what each other has written. This happens a lot nowdays, people skim emails and messages and communication suffers.

To solve the issue I've redownloaded ethOS and will reinstall as I need to use the internet on the machine and the Chromium program, as mentioned above, is not working.

just type in 'browser' in command line to launch Chromium

If that was the only rig reporting and it was offline for a little bit, the system probably just changed your panel "name". Confirm the address by typing helpme into your rig.

Thanks for your quick response.  The rig boots and hashes fine. The name is the same.  The problem is that the Chromium browser window is all black and then a Page Unresponsive alert window pops up.  I've rebooted the machine numerous times.  Same problem.  "helpme" works fine as well as the "browser" command, however the Chromium window is blank and unresponsive. I've read this thread and searched the internet and haven't seen any answers.

If that was the only rig reporting and it was offline for a little bit, the system probably just changed your panel "name". Confirm the address by typing helpme into your rig.

Hello.  I just updated my rig to 1.3.1 and clicking on the menu shortcuts for ethOS Stats Panel and ethOS Knowledgebase bring up a blank Chromium screen.  After a little bit, an alert pops up that says the page is unresponsive, but that is blacked out as well.  I see no other ways to open Chromium and this bug was not there before the update.  Next steps?

Is there a miner in ethos 1.3.1 to mine CN Heavy?

If there isn't, please include it in the next update.

I've tried compile miners on my own and even try sgminer-gm 5.5.6 with no luck.

after using pwr parameter rig was lowered hashes and crashed. i did not find stable config parameters yet. i will re-update my vbioses with new one.

yea i upgrade ethos to 1.3.1 but on ati gpus watt consumption not shown on panel. with nvidia gpus i can see watt consumption per gpu. if i am not wrong, pwr parameter works with 1-7 values on amd gpus as powertune settings.

# KNOWN GOOD SAMPLE AMDGPU (RX 400/500) GLOBAL CONFIG
# ------------------------------------------------------
# globalcore 1180
# globalmem 2000
# ------------------------------------------------------
#
# NOTE:   AS of ethOS 1.3.1, OPTIONAL "pwr"/"globalpowertune" adjusts AMDGPU watts, and OPTIONAL dpm adjusts AMDGPU dpm state.
#       Set lower for lower power usage, set higher if overclocking. Limiting power this way will negatively impact hashrate.
#       It is advised to use voltage adjustment to achieve low power draw while maintaining high hashrate.
#       Default DPM is 5
#       "dpm"/"globaldpm" is DPM state range 0-7 (OPTIONAL). Set lower may lower power usage, set higher if overclocking.
#       "vlt" has a safe voltage range of 950 (low) to stock +150mv.
#       To enable UNSAFE/DANGEROUS voltage adjustments, set "safevolt disabled".
#
# ------------------------------------------------------
# globalpowertune 130
# globaldpm 5
# safevolt enabled
# ------------------------------------------------------
#
# SAMPLE PER-RIG CONFIG FOR AMDGPU (for a 6-gpu rig)
# ------------------------------------------------------
# cor c94e13 1180 1180 1180 1180 1180 1180
# mem c94e13 2150 2150 2150 2150 2150 2150
# pwr c94e13 130 130 130 130 130 130
# dpm c94e13 5 5 5 5 5 5
# vlt c94e13 950 950 950 950 950 950
# ------------------------------------------------------
#
# ADVANCED AMDGPU (RX 400/500)  Overclocking notes:
# NOTE: vddci is adjustable between values of 700 and 1000 (mv)
# WARNING: Do not adjust without understanding what VDDCI does as you may damage your hardware!
#
# VDDCI CONFIG EXAMPLE (PER-RIG):
# ------------------------------------------------------
# vddci c94e13 900 900 900 900 990 900 900
# ------------------------------------------------------

If you updated to 1.3.1, it should directly report wattage now.

after setting  vol RIGID 900 900 xxx parameter pwr parameter did not working. my cards powertune is 5 now. i use pwr RIDIG 2 2 2 with vol parameter. i have no idea about power consumption now.
why pwr params disabled with using vol ?

Someone checked if voltage can go below 0.9v with this one? I see they improved their voltage control tool.

safevolt disabled

so I have a 16 x 1060 rig and I want to change  to

raven  from zec


I will poke around here and come back to this thread
http://ethosdistro.com/