Topic: [EVL] Evolution Decentralized Exchange (Stablecoins Platform, DPoS) - page 9. (Read 14031 times)

Quote from: brokedummy on June 26, 2017, 04:52:56 PM

I tried to place an order and it says "Unknown Error Failed to place order for 500000 1.3.3" 500000 is the amount of bitTilt I wanted for buy for 1000 evo.

is the delegate_node node running when you placed the order?

Yes it is running

can you try closing the wallet and running it again and placing the order again?

I think that fixed it, now I see a trade that already happened and when I try to make another it says "failed to broadcast do you have the private key?" Maybe I deleted the wrong ones?

can you check in account->advanced features->permissions
active permission and owner permission should have one key each that is linked to your password

brokedummy

legendary

Activity: 980

Merit: 1004

Quote from: megatilt on June 27, 2017, 10:34:04 AM

Quote from: brokedummy on June 27, 2017, 10:30:29 AM

Quote from: brokedummy on June 26, 2017, 04:52:56 PM

I tried to place an order and it says "Unknown Error Failed to place order for 500000 1.3.3" 500000 is the amount of bitTilt I wanted for buy for 1000 evo.

is the delegate_node node running when you placed the order?

Yes it is running

can you try closing the wallet and running it again and placing the order again?

I think that fixed it, now I see a trade that already happened and when I try to make another it says "failed to broadcast do you have the private key?" Maybe I deleted the wrong ones?

megatilt

full member

Activity: 126

Merit: 100

Quote from: devollito on June 27, 2017, 09:52:34 AM

This project is good has a good raodmap, but i dont really like dpos, almost impossible to gain profit if we are not voted as delegation

being a delegate is not the only way to profit.
also, some delegates would offer most of their profit to their voters.
every token you have represents a voting power.
i think dpos is one of the best consensus methods in cryptocurrency.

megatilt

full member

Activity: 126

Merit: 100

Quote from: EarlyCryptoInvestor on June 27, 2017, 02:29:41 PM

@megatilit: will i be able to claim my EVO in the following scenario: i send ETH to a new address with my account as sign and after that i send my TIME to the same address.

if i understand it right, yes.
you can send eth to a new address and put your evolution account name in the extra data field.
then transfer your TIME to that address.
you can claim your EVO tokens this way.

EarlyCryptoInvestor

newbie

Activity: 11

Merit: 0

@megatilit: will i be able to claim my EVO in the following scenario: i send ETH to a new address with my account as sign and after that i send my TIME to the same address.

megatilt

full member

Activity: 126

Merit: 100

Quote from: brokedummy on June 27, 2017, 10:30:29 AM

Quote from: brokedummy on June 26, 2017, 04:52:56 PM

I tried to place an order and it says "Unknown Error Failed to place order for 500000 1.3.3" 500000 is the amount of bitTilt I wanted for buy for 1000 evo.

is the delegate_node node running when you placed the order?

Yes it is running

can you try closing the wallet and running it again and placing the order again?

brokedummy

legendary

Activity: 980

Merit: 1004

Quote from: brokedummy on June 26, 2017, 04:52:56 PM

I tried to place an order and it says "Unknown Error Failed to place order for 500000 1.3.3" 500000 is the amount of bitTilt I wanted for buy for 1000 evo.

is the delegate_node node running when you placed the order?

Yes it is running

devollito

full member

Activity: 560

Merit: 217

This project is good has a good raodmap, but i dont really like dpos, almost impossible to gain profit if we are not voted as delegation

megatilt

full member

Activity: 126

Merit: 100

Learn about bitUSD, bitBTC, bitTILT, bitTIME

https://www.youtube.com/watch?v=kVdw1TbyDV4&list=PLjgfpSQFJTLpKmTGCG8FjvDFbfst6F-x5&index=4

Omura

full member

Activity: 129

Merit: 100

Quote from: mm2543363580 on June 26, 2017, 10:52:45 PM

10M will be given for free to bitcointalk members.

how to get it

Just created one for you, check pm for details and follow megatilt's instructions to claim your free 5k

lonesomestranger

full member

Activity: 770

Merit: 112

Quote from: megatilt on June 27, 2017, 04:10:53 AM

Quote from: lonesomestranger on June 27, 2017, 04:02:28 AM

Quote from: megatilt on June 27, 2017, 03:44:24 AM

Quote from: lonesomestranger on June 27, 2017, 03:37:32 AM

Quote from: lonesomestranger on June 27, 2017, 03:27:44 AM

Quote from: lonesomestranger on June 27, 2017, 04:02:28 AM

...

...

Always remember, when you get your account, change your password to get your new private keys and remove the old private keys.
Or even better, use your new account to create a fresh new one.

Can someone please explain where to change pw and remove old private keys?

go to account, permission, account model and put your new password
it will give you a set of keys that is derived from your password.

use those keys and publish the changes.
then in the active permissions and owner permissions you would have 2 keys, one for the old password and one for the new password. you can remove the one for the old password so that you are now sure that it's only you who can access your account.

Hi, I did as you said, I changed the old password, I removed the old keys but when I open the evl account the old keys are still there and the ones created for new password are gone.

you must publish the changes and confirm the transaction for it to be recorded in the blockchain

Can you please explain me how to do that

there is blue button which says "publish changes". after you make your changes, you press it and a confirmation dialog will appear.

I have done that several times before, I did it again now, but nothing happens. I hit publish changes but nothing happens

can you try closing your wallet and running it again and try again?
are you sure the delegate_node is running?

I re-installed the wallet and it works just fine, I changed my password and keys successfuly, thanks

megatilt

full member

Activity: 126

Merit: 100

Quote from: megatilt on June 27, 2017, 03:44:24 AM

Quote from: lonesomestranger on June 27, 2017, 03:37:32 AM

Quote from: lonesomestranger on June 27, 2017, 03:27:44 AM

Quote from: megatilt on June 27, 2017, 03:44:24 AM

...

...

Always remember, when you get your account, change your password to get your new private keys and remove the old private keys.
Or even better, use your new account to create a fresh new one.

Can someone please explain where to change pw and remove old private keys?

go to account, permission, account model and put your new password
it will give you a set of keys that is derived from your password.

use those keys and publish the changes.
then in the active permissions and owner permissions you would have 2 keys, one for the old password and one for the new password. you can remove the one for the old password so that you are now sure that it's only you who can access your account.

Hi, I did as you said, I changed the old password, I removed the old keys but when I open the evl account the old keys are still there and the ones created for new password are gone.

you must publish the changes and confirm the transaction for it to be recorded in the blockchain

Can you please explain me how to do that

there is blue button which says "publish changes". after you make your changes, you press it and a confirmation dialog will appear.

I have done that several times before, I did it again now, but nothing happens. I hit publish changes but nothing happens

can you try closing your wallet and running it again and try again?
are you sure the delegate_node is running?

lonesomestranger

full member

Activity: 770

Merit: 112

Quote from: lonesomestranger on June 27, 2017, 03:37:32 AM

Quote from: lonesomestranger on June 27, 2017, 03:27:44 AM

Quote from: lonesomestranger on June 27, 2017, 03:37:32 AM

...

...

Always remember, when you get your account, change your password to get your new private keys and remove the old private keys.
Or even better, use your new account to create a fresh new one.

Can someone please explain where to change pw and remove old private keys?

go to account, permission, account model and put your new password
it will give you a set of keys that is derived from your password.

use those keys and publish the changes.
then in the active permissions and owner permissions you would have 2 keys, one for the old password and one for the new password. you can remove the one for the old password so that you are now sure that it's only you who can access your account.

Hi, I did as you said, I changed the old password, I removed the old keys but when I open the evl account the old keys are still there and the ones created for new password are gone.

you must publish the changes and confirm the transaction for it to be recorded in the blockchain

Can you please explain me how to do that

there is blue button which says "publish changes". after you make your changes, you press it and a confirmation dialog will appear.

I have done that several times before, I did it again now, but nothing happens. I hit publish changes but nothing happens

megatilt

full member

Activity: 126

Merit: 100

Quote from: lonesomestranger on June 27, 2017, 03:27:44 AM