EWBF's Cuda Equihash Miner 0.6 - page 31.

AlexBeard

newbie

Activity: 12

Merit: 0

Quote from: gsanjin on July 06, 2018, 04:13:34 AM

Quote from: AlexBeard on July 06, 2018, 04:06:10 AM

I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me? Huh

Are you sure you added required parameter --pers BgoldPoW?

Yes I am sure.

gsanjin

member

Activity: 191

Merit: 12

Quote from: AlexBeard on July 06, 2018, 04:06:10 AM

I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me? Huh

Are you sure you added required parameter --pers BgoldPoW?

AlexBeard

newbie

Activity: 12

Merit: 0

I am trying to mine btg at suprnova and only get rejected shares, I use hiveos and mined at suprnova before the fork and worked fine, now I changed to new ewbf version, algo 144_5 and new port 8866 but I only get rejected shares, can anyone help me? Huh

SouthWEBA

copper member

Activity: 5

Merit: 0

Quote from: EWBF_ on July 05, 2018, 05:23:42 PM

Quote from: SouthWEBA on July 05, 2018, 04:21:39 PM

Quote from: EWBF_ on July 05, 2018, 02:24:55 PM

Quote from: SouthWEBA on July 05, 2018, 11:35:56 AM

Hello @EWBF_

hardware:

motherboard: asrock h110 pro btc (13gpu)
memory : 4gb
cpu Celeron 3930
UNIX - Fedora

Version 0.3.4b working super to ZEC

video cards: 13 gtx EVGA SC2 1080Ti

issue:

gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection.
May be build the miner to detect all gpus at the very start?

I tested to start 2 miner

cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12

and is very very very slow process detected card :-( and crashed EWBF

Please help me ASAP i have +- 3000 card

13x1070 card working normal

Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version!

This version not working :-(

I use CUDA 8

06.07.2018 00:19:09 ERROR: CUDA driver version is insufficient for CUDA runtime version

Added cuda 8 version.

Super, thx! All card started normal and working. I have new problem :-( Load average very big now 27 - 28 please check screen

https://c2n.me/3Vhrpka.png

Version 0.3.4b maximum load average 5-6

Because of this load not working normal command "nvidia-smi -q | grep miner | wc -l" and WathDog reboot all ferms :-(

valaki

newbie

Activity: 6

Merit: 0

"Quote from: EWBF_ on June 14, 2018, 10:55:16 PM
Good that it helped, I will fix this part of the code and include the fix in the next version. Thanks for the feedback."

And EWBF_ please dont forget change -intensity command real 1-64 scale (here intensity 1 and same eat computer resources than 64.., nothing change), its very important! Thank you.

EWBF_

full member

Activity: 198

Merit: 160

Quote from: Hurtman on July 05, 2018, 03:39:21 PM

EWBF_
is there any news about the normal support of Maxwell? (GTX 970/980)

Sorry, right now there is no news, I'm working on it.

EWBF_

full member

Activity: 198

Merit: 160

Quote from: sir_blacks on July 05, 2018, 04:25:48 PM

Quote from: EWBF_ on July 05, 2018, 02:24:55 PM

Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version!

@EWBF_ hmm after i take this new test version miner it start running what it make me think in other version when it use --cuda_devices 0 & there are 2,3 gpu in reality miner it was not deselect other one coz check this:

--cuda_devices 1 (2 GPU) - v0.3 normal version

Code:

+-------------------------------------------------+
| EWBF's Eqihash CUDA miner. v0.3 |
+-------------------------------------------------+
23:55:57 INFO: Current pool: btg.suprnova.cc:8866
23:55:57 INFO: Selected pools: 1
23:55:57 INFO: Algorithm: 144_5 "BgoldPoW"
23:55:57 INFO: Devices: User defined.
23:55:57 INFO: Temperature limit: 90
23:55:57 INFO: Api: Disabled
---------------------------------------------------
23:55:57 INFO: Target: 00f0f0f0f0f0f0f0...
23:55:57 INFO: Detected new work: 62f
23:55:58 CUDA: Device: 0 GeForce GTX 1060 3GB Not selected.
23:55:58 ERROR: out of memory

--cuda_devices 0 (2 GPU) - v0.3 normal version

Code:

+-------------------------------------------------+
| EWBF's Eqihash CUDA miner. v0.3 |
+-------------------------------------------------+
20:15:04 INFO: Current pool: btg.suprnova.cc:8866
20:15:04 INFO: Selected pools: 1
20:15:04 INFO: Algorithm: 144_5 "BgoldPoW"
20:15:04 INFO: Devices: User defined.
20:15:04 INFO: Temperature limit: 90
20:15:04 INFO: Api: Disabled
---------------------------------------------------
20:15:04 INFO: Target: 00f0f0f0f0f0f0f0...
20:15:04 INFO: Detected new work: 5b7
20:15:04 CUDA: Device: 0 GeForce GTX 1060 3GB, 3072 MB i:64
20:15:04 ERROR: out of memory

--cuda_devices 0 (2 GPU) - new test version functional one

Code:

+-------------------------------------------------+
| EWBF's Eqihash CUDA miner. v0.3 |
+-------------------------------------------------+
00:11:37 INFO: Current pool: btg.suprnova.cc:8866
00:11:37 INFO: Selected pools: 1
00:11:37 INFO: Algorithm: 144_5 "BgoldPoW"
00:11:37 INFO: Devices: User defined.
00:11:37 INFO: Temperature limit: 90
00:11:37 INFO: Api: Disabled
---------------------------------------------------
00:11:38 INFO: Target: 00f0f0f0f0f0f0f0...
00:11:38 INFO: Detected new work: 636
00:11:38 Device detection:
00:11:38 CUDA: Device: 0 GeForce GTX 1060 3GB, 3072 MB i:64
00:11:38 CUDA: Device: 1 GeForce GTX 650 Not selected.
00:11:38 Running device threads:
00:11:38 CUDA: Device: GeForce GTX 1060 3GB 0000:01:00.0 started...

Power Limit: 74%, Core Clock: +164, Memory: +500 (Samsung Vram)

Code:

00:20:46 Temp: GPU0: 63C
00:20:46 GPU0: 24 Sol/s
00:20:46 Total speed: 24 Sol/s
00:20:46 -----------+--------------+
| GPU | Power usage | Efficiency |
+-----+-------------+--------------+
| 0 | 82W | 0.29 Sol/W |
+-----+-------------+--------------+

so conclusion new test version it fix using device correctly (cuda 9.1) ....

Good that it helped, I will fix this part of the code and include the fix in the next version. Thanks for the feedback.

EWBF_

full member

Activity: 198

Merit: 160

Quote from: SouthWEBA on July 05, 2018, 04:21:39 PM

Quote from: EWBF_ on July 05, 2018, 02:24:55 PM

Quote from: SouthWEBA on July 05, 2018, 11:35:56 AM

Hello @EWBF_

hardware:

motherboard: asrock h110 pro btc (13gpu)
memory : 4gb
cpu Celeron 3930
UNIX - Fedora

Version 0.3.4b working super to ZEC

video cards: 13 gtx EVGA SC2 1080Ti

issue:

gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection.
May be build the miner to detect all gpus at the very start?

I tested to start 2 miner

cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12

and is very very very slow process detected card :-( and crashed EWBF

Please help me ASAP i have +- 3000 card

13x1070 card working normal

Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version!

This version not working :-(

I use CUDA 8

06.07.2018 00:19:09 ERROR: CUDA driver version is insufficient for CUDA runtime version

Added cuda 8 version.

sir_blacks

jr. member

Activity: 119

Merit: 3

Quote from: gsanjin on July 05, 2018, 05:02:30 PM

Quote from: sir_blacks on July 05, 2018, 04:25:48 PM

so conclusion new test version it fix using device correctly (cuda 9.1) ....

Glad you found out solution, after all it was bug in device selection code.

well merit it need go to @EWBF_ coz it came with this test version

is fine

gsanjin

member

Activity: 191

Merit: 12

Quote from: sir_blacks on July 05, 2018, 04:25:48 PM

so conclusion new test version it fix using device correctly (cuda 9.1) ....

Glad you found out solution, after all it was bug in device selection code.

cirlama

jr. member

Activity: 156

Merit: 1

for me, mining zero with gtx 1080 ti, efficiency is better with high intensity (--intensity 90 --algo 192_7) and reduced power (like 65 to 70%), 33 sol/s (+400 mem, +80 core, 65% power)

similar results for MNX coin (--intensity 90 --algo 96_5)

with base intensity, I need more power in Watt to achieve the same hashrate

sir_blacks

jr. member

Activity: 119

Merit: 3

Quote from: EWBF_ on July 05, 2018, 02:24:55 PM

Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version!

@EWBF_ hmm after i take this new test version miner it start running what it make me think in other version when it use --cuda_devices 0 & there are 2,3 gpu in reality miner it was not deselect other one coz check this:

--cuda_devices 1 (2 GPU) - v0.3 normal version

Code:

+-------------------------------------------------+
|         EWBF's Eqihash CUDA miner. v0.3         |
+-------------------------------------------------+
23:55:57 INFO: Current pool: btg.suprnova.cc:8866
23:55:57 INFO: Selected pools: 1
23:55:57 INFO: Algorithm: 144_5 "BgoldPoW"
23:55:57 INFO: Devices: User defined.
23:55:57 INFO: Temperature limit: 90
23:55:57 INFO: Api: Disabled
---------------------------------------------------
23:55:57 INFO: Target: 00f0f0f0f0f0f0f0...
23:55:57 INFO: Detected new work: 62f
23:55:58 CUDA: Device: 0 GeForce GTX 1060 3GB Not selected.
23:55:58 ERROR: out of memory

--cuda_devices 0 (2 GPU) - v0.3 normal version

Code:

+-------------------------------------------------+
|         EWBF's Eqihash CUDA miner. v0.3         |
+-------------------------------------------------+
20:15:04 INFO: Current pool: btg.suprnova.cc:8866
20:15:04 INFO: Selected pools: 1
20:15:04 INFO: Algorithm: 144_5 "BgoldPoW"
20:15:04 INFO: Devices: User defined.
20:15:04 INFO: Temperature limit: 90
20:15:04 INFO: Api: Disabled
---------------------------------------------------
20:15:04 INFO: Target: 00f0f0f0f0f0f0f0...
20:15:04 INFO: Detected new work: 5b7
20:15:04 CUDA: Device: 0 GeForce GTX 1060 3GB, 3072 MB i:64
20:15:04 ERROR: out of memory

--cuda_devices 0 (2 GPU) - new test version functional one

Code:

+-------------------------------------------------+
|         EWBF's Eqihash CUDA miner. v0.3         |
+-------------------------------------------------+
00:11:37 INFO: Current pool: btg.suprnova.cc:8866
00:11:37 INFO: Selected pools: 1
00:11:37 INFO: Algorithm: 144_5 "BgoldPoW"
00:11:37 INFO: Devices: User defined.
00:11:37 INFO: Temperature limit: 90
00:11:37 INFO: Api: Disabled
---------------------------------------------------
00:11:38 INFO: Target: 00f0f0f0f0f0f0f0...
00:11:38 INFO: Detected new work: 636
00:11:38 Device detection:
00:11:38 CUDA: Device: 0 GeForce GTX 1060 3GB, 3072 MB i:64
00:11:38 CUDA: Device: 1 GeForce GTX 650 Not selected.
00:11:38 Running device threads:
00:11:38 CUDA: Device: GeForce GTX 1060 3GB 0000:01:00.0 started...

Power Limit: 74%, Core Clock: +164, Memory: +500 (Samsung Vram)

Code:

00:20:46 Temp: GPU0: 63C
00:20:46 GPU0: 24 Sol/s
00:20:46 Total speed: 24 Sol/s
00:20:46 -----------+--------------+
| GPU | Power usage |  Efficiency  |
+-----+-------------+--------------+
|  0  |     82W     |  0.29 Sol/W  |
+-----+-------------+--------------+

so conclusion new test version it fix using device correctly (cuda 9.1) ....

SouthWEBA

copper member

Activity: 5

Merit: 0

Quote from: EWBF_ on July 05, 2018, 02:24:55 PM

Quote from: SouthWEBA on July 05, 2018, 11:35:56 AM

Hello @EWBF_

hardware:

motherboard: asrock h110 pro btc (13gpu)
memory : 4gb
cpu Celeron 3930
UNIX - Fedora

Version 0.3.4b working super to ZEC

video cards: 13 gtx EVGA SC2 1080Ti

issue:

gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection.
May be build the miner to detect all gpus at the very start?

I tested to start 2 miner

cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12

and is very very very slow process detected card :-( and crashed EWBF

Please help me ASAP i have +- 3000 card

13x1070 card working normal

Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version!

This version not working :-(

I use CUDA 8

06.07.2018 00:19:09 ERROR: CUDA driver version is insufficient for CUDA runtime version

Hurtman

full member

Activity: 180

Merit: 100

EWBF_
is there any news about the normal support of Maxwell? (GTX 970/980)

gsanjin

member

Activity: 191

Merit: 12

Quote from: sir_blacks on July 05, 2018, 11:54:33 AM

Quote from: gsanjin on July 05, 2018, 11:32:14 AM

Quote from: sir_blacks on July 05, 2018, 11:05:44 AM

...
GPU 1: Gigabyte GeForce GTX 650 2GB (2048 MB) = used for my own necessitate, browsing, working, sometime gaming
...
With this setting i was play game on 650 & mine on 1060 ETH, Neoscript, old Equihash with out problem only now i can't use your miner because it say from start "ERROR: out of memory" with is something wrong

Bolded is your problem, 3GB cards are new required minimum. Your only option is to start miner only on GPU0 (3GB one), look few post above how to do that (in your case use parameter --cuda_devices 0 for GPU0).

gsanjin if you was read i say GP0 is use only for mining aka always in any mining application i enable only GP0 aka in EWBF case i have "--cuda_devices 0" used, so what you was say is not issue, thx anyway

@Overdrive5 you to was not read all what i write 650 GPU = "used for my own necessitate, browsing, working, sometime gaming" is NOT use for mining ... only 1060 read full post what done on previos page aka here https://bitcointalksearch.org/topic/m.41579162

Yes, on second read

You're using v0.3? There were problems with 3GB on first versions of miner on Win 10 because of way Win 10 addresses GPU memory, but I see you use Win 7. Have you tried using --cuda_devices 1 maybe gpu ordering is wrong? Any difference if you try mining with just one card in system?

EWBF_

full member

Activity: 198

Merit: 160

Quote from: SouthWEBA on July 05, 2018, 11:35:56 AM

Hello @EWBF_

hardware:

motherboard: asrock h110 pro btc (13gpu)
memory : 4gb
cpu Celeron 3930
UNIX - Fedora

Version 0.3.4b working super to ZEC

video cards: 13 gtx EVGA SC2 1080Ti

issue:

gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection.
May be build the miner to detect all gpus at the very start?

I tested to start 2 miner

cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12

and is very very very slow process detected card :-( and crashed EWBF

Please help me ASAP i have +- 3000 card

13x1070 card working normal

Hello! check this out: https://mega.nz/#F!uhQR0IRa!jZ_tdULPoUf3ib4O6-1BoQ this is a special version, basically the same v0.3, but with a modified device launch system. Please note that if you do not have a problem with starting up devices, do not use this version!

Coin++

sr. member

Activity: 810

Merit: 444

Quote from: lolchina on July 05, 2018, 11:27:20 AM

Am i the only one so far that dont have any kind of improvment with 0.3 version speed wise,on 144.5 algo my 1080tis are doing 55-60 sols wich is the same speed that they had on previous version...Am i missing out something or boost is for 1060/70 cards?

For me : 1050Ti, and 15% boost with v0.3 :-)

baraday

newbie

Activity: 20

Merit: 0

Quote from: lolchina on July 05, 2018, 11:27:20 AM

Am i the only one so far that dont have any kind of improvment with 0.3 version speed wise,on 144.5 algo my 1080tis are doing 55-60 sols wich is the same speed that they had on previous version...Am i missing out something or boost is for 1060/70 cards?

I also have 0 improvement on my 1080ti, so perhaps with the next version Grin

Overdrive5

member

Activity: 113

Merit: 10

Quote from: SouthWEBA on July 05, 2018, 12:13:14 PM

UNIX - Fedora

Version 0.3.4b working super to ZEC

Quote from: Overdrive5 on July 05, 2018, 11:43:58 AM

Quote from: SouthWEBA on July 05, 2018, 11:35:56 AM

Hello @EWBF_

hardware:

motherboard: asrock h110 pro btc (13gpu)
memory : 4gb
cpu Celeron 3930

video cards: 13 gtx EVGA SC2 1080Ti

issue:

gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection.
May be build the miner to detect all gpus at the very start?

I started 2 miner

cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12

and is very very very slow process detected card :-( and crashed EWBF

Please help me ASAP i have +- 3000 card

13x1070 card working normal

SouthWEBA, Which O/S?

How much swap are you running?

SouthWEBA

copper member

Activity: 5

Merit: 0

UNIX - Fedora

Version 0.3.4b working super to ZEC

Quote from: Overdrive5 on July 05, 2018, 11:43:58 AM

Quote from: SouthWEBA on July 05, 2018, 11:35:56 AM

Hello @EWBF_

hardware:

motherboard: asrock h110 pro btc (13gpu)
memory : 4gb
cpu Celeron 3930

video cards: 13 gtx EVGA SC2 1080Ti

issue:

gpu 9 gpu 10 gpu 11 and gpu 12 always gets stuck and stops working during gpu detection.
May be build the miner to detect all gpus at the very start?

I started 2 miner

cuda_devices 0 1 2 3 4 5 6 and 7 8 9 10 11 12

and is very very very slow process detected card :-( and crashed EWBF

Please help me ASAP i have +- 3000 card

13x1070 card working normal

SouthWEBA, Which O/S?

Topic: EWBF's Cuda Equihash Miner 0.6 - page 31. (Read 85805 times)