Topic: EWBF's CUDA Zcash miner - page 121. (Read 2164327 times)

Periodically, the application hangs and does nothing, after pressing Enter in the window the application displays the message "Temp: ERROR: Lost connection with the server." Next, the connection is reconnected and the execution continues. The parameter --eexit 3 is enabled, the temperature of the GPU is normally not more than 70 degrees Celsius. Someone faced a similar problem?

Do u mine Ethereum with Zotac 1060 Mini and whtas ur hasrate? ty

Can someone write a small program - a monitor? Like ETHmon, by Claymore's for his miner. To collect data from several IP / rigs?
For Windows, and for Android too )

It really is quite easy, you just need to connect to your modem, it will most likely have port forwarding options.  If you can get a mining rig up and running, I'm sure you can figure out the port forwarding.

Thank you. I am not a tech guy. therefore I will not be able to do it

If you want to use your WAN IP you will need to use a router to forward the requests with the port numbers on to the correct rig.  Each individual rig will need to be set to its local IP + a port number that is unique for router to forward to. 

ie.

192.168.1.1:42001 - rig1
192.168.1.2:42002 - rig2
192.168.1.3:42003 - rig3

ect.

then you just need to setup the corresponding forwards in the WAN router to direct each unique port to the correct local IP.

I opened port 42000 however WANIP:42000  not working . I put my public ip on "WANIP"

I have multiple  rigs on that IP, is it a reason?

Thanks!

Just remove the /getstat from the link.

Hello,
api results shows as text, not like graphics.

How can I fix it?



{"method":"getstat", "error":null, "start_time":1498033895, "current_server":"eu1-zcash.flypool.org:3333", "available_servers":1, "server_status":2, "result":[{"gpuid":0, "cudaid":0, "busid":"0000:01:00.0", "name":"GeForce GTX 1060 6GB", "gpu_status":2, "solver":0, "temperature":70, "gpu_power_usage":91, "speed_sps":279, "accepted_shares":12, "rejected_shares":0, "start_time":1498033897},{"gpuid":1, "cudaid":1, "busid":"0000:03:00.0", "name":"GeForce GTX 1060 6GB", "gpu_status":2, "solver":0, "temperature":72, "gpu_power_usage":90, "speed_sps":263, "accepted_shares":11, "rejected_shares":0, "start_time":1498033897},{"gpuid":2, "cudaid":2, "busid":"0000:06:00.0", "name":"GeForce GTX 1060 6GB", "gpu_status":2, "solver":0, "temperature":70, "gpu_power_usage":91, "speed_sps":287, "accepted_shares":10, "rejected_shares":0, "start_time":1498033897},{"gpuid":3, "cudaid":3, "busid":"0000:07:00.0", "name":"GeForce GTX 1060 6GB", "gpu_status":2, "solver":0, "temperature":71, "gpu_power_usage":89, "speed_sps":281, "accepted_shares":5, "rejected_shares":0, "start_time":1498033898},{"gpuid":4, "cudaid":4, "busid":"0000:08:00.0", "name":"GeForce GTX 1060 6GB", "gpu_status":2, "solver":0, "temperature":67, "gpu_power_usage":93, "speed_sps":279, "accepted_shares":10, "rejected_shares":0, "start_time":1498033898},{"gpuid":5, "cudaid":5, "busid":"0000:09:00.0", "name":"GeForce GTX 1060 6GB", "gpu_status":2, "solver":0, "temperature":59, "gpu_power_usage":85, "speed_sps":214, "accepted_shares":10, "rejected_shares":0, "start_time":1498033898}]}

1080's on Hush

dear EWBF_, can you please add an ability to work api in this way:

or
or even

i do have dynamic ip 
thx

I hope 1080Ti's dont start dying on us with 0.3.4, I plan on getting quite a few of them.

Wow, that is impressive. Care to share your overclock settings?

I'm trying to figure out what the sweet spot is. Do I push core clock, or should I focus on mem clock?
Can I reduce the voltage down quite a bit? Going to start experimenting now, but some pointers would be appreciated!

Thanks

Yes, you need to open the port 42000 in your router and then connect to your WANIP :42000

Thanks. Now work. But work only in local computer with ewbf. How can open from another computer/ipad?

If you want to be able to access the page from other PC's on your network, change the 127.0.0.1 to the IP address of the mining pc in your config file.  It's probably a good idea to assign the unit a static IP address while you are at it.  Once you make the change you may get a firewall notice that pops up the first time you start the miner with the changed address.

Well, if anyone cares. What solved it was a firmware update and reset of my Asus router. Weird, worked with ETH stratum before the upgrade but that fixed it.

Good luck all.

I have got it working!

I reflashed the mobo bios. I guess I clicked all the right buttons this time One of those clicks has me wondering, I am not sure I had internal graphics disabled.

Thanks to anyone who even thought about the problem.

Oh Yeah! This is from the terminal that is mining. Now If I can only figure out why I can't get it in the other room.



Where's the beer!

 

  hi guys,

I have just started mining for awhile and still learning about it. Has anyone experienced that the miner stopped at dev fee accepted, where it just stopped not going forward anymore. (the window is fine)

Also, I have read the previous reply where someone say you can restart the system and solve the issue of code 46, by adding the command (-r24) "restart by user"? Does anyone know how to write this command? I have googled it but can't see any hint.