Topic: EWBF&#039;s CUDA Zcash miner - page 122. (Read 2164327 times)

Quote from: Abcederian on June 20, 2017, 05:25:11 PM

Quote from: Abcederian on June 20, 2017, 08:47:08 PM

I'm done with "When I get in my car it wont start, what's wrong" kind of questions.
People you would help yourself by giving more info about the problem.

How to ask for troubleshooting help V2

http://www.tomshardware.com/forum/264823-31-troubleshooting#t1934282

I apologize for troubling you fellow's

I am still searching for a solution.

This is what is happening. The miner performs fantastic with 4 cards but when I add a fifth card only 3 cards are running. The 2 cards that are not mining show up in the device manager with code 12 - not enough free resources.

This rig consists of the following -

CPU G4400 Skylake 1151
Biostar TB 250
4 gb RAM
4 x MSI 1070 8gb Armor , 1 x MSI 1070 gaming 8gb (all on powered risers)
EVGA 1000 P2
120 gb SSD
Windows 10 64 bit Pro Version 1703 (just updated)

I ran into a similar problem with RX 570's and never quite figured out the driver patch until I watched Cryptomined's video. By then I had already switched over to ethOS. Which by the way runs fantastic. To bad there is no support for Nvidia with it. I have 4 rigs running that presently. Rig5 is the first Nvidia rig and today is the first time I have had more than 4 cards.

If someone could point me to a link or thread or anything I would really appreciate it.

TIA

I think your PSU is too thin on power.
(5 gpu *150w)+(5risers*25w)+100w for the rest= 975w at 82% performance = 1150w.@ the wall.

Thanks for the response.

I swapped out a 1300 from a different rig. I am getting the same result. The four card system is drawing 628 according to a killawatt.
I have searched just about everything I can think of. I haven't even found anyone else having the same problem.

This error won't be related to power or available power, it is most likely due a shortage of PCIe lanes. Are all of your PCIe connectors set to 1.0 or 2.0 in the bios?

How can I affect the PCIe lanes on a Biostar tb 250?

At the start of the day PCI-e's were set to automatic and were working fine. They are now set to gen 2. That has had no effect on the system. I just changed miner mode to disabled. No effect 3 out of 5 work. Take one off, 4 out 4. I have swapped out one of the armor's for the gaming and 4 out of 4. I replaced the riser on the new card (gaming). same thing 3 of 5 , 4 of 4.

Thanks again.

sublimus

full member

Activity: 240

Merit: 100

Quote from: Abcederian on June 20, 2017, 05:25:11 PM

Quote from: agente on June 20, 2017, 09:11:20 PM

I'm done with "When I get in my car it wont start, what's wrong" kind of questions.
People you would help yourself by giving more info about the problem.

How to ask for troubleshooting help V2

http://www.tomshardware.com/forum/264823-31-troubleshooting#t1934282

I apologize for troubling you fellow's

I am still searching for a solution.

This is what is happening. The miner performs fantastic with 4 cards but when I add a fifth card only 3 cards are running. The 2 cards that are not mining show up in the device manager with code 12 - not enough free resources.

This rig consists of the following -

CPU G4400 Skylake 1151
Biostar TB 250
4 gb RAM
4 x MSI 1070 8gb Armor , 1 x MSI 1070 gaming 8gb (all on powered risers)
EVGA 1000 P2
120 gb SSD
Windows 10 64 bit Pro Version 1703 (just updated)

I ran into a similar problem with RX 570's and never quite figured out the driver patch until I watched Cryptomined's video. By then I had already switched over to ethOS. Which by the way runs fantastic. To bad there is no support for Nvidia with it. I have 4 rigs running that presently. Rig5 is the first Nvidia rig and today is the first time I have had more than 4 cards.

If someone could point me to a link or thread or anything I would really appreciate it.

TIA

I think your PSU is too thin on power.
(5 gpu *150w)+(5risers*25w)+100w for the rest= 975w at 82% performance = 1150w.@ the wall.

Thanks for the response.

I swapped out a 1300 from a different rig. I am getting the same result. The four card system is drawing 628 according to a killawatt.
I have searched just about everything I can think of. I haven't even found anyone else having the same problem.

In bios > advance settings > Peg1 & peg0 should be set to Gen1
> above 4G enable.
High definition audio = disable.

On one of my MSI MB I had to flash update the bios to get an option saying "Mining ------" cant recall exactly.

nUm81

member

Activity: 126

Merit: 11

Quote from: asp333 on June 20, 2017, 08:41:53 PM

Quote from: Abcederian on June 20, 2017, 08:47:08 PM

hi, since i formatted my pc to move to win7 from win10, ewbf is slowing my desktop, tryed other driver (was using 382.53, now 378.78), any help pls? sol/s is fine, around 300 on both systems, is just the sluggish feel on desktop that i hadn't on win10, my gpu is a gtx 1060 6gb

i`ve had the same problem on windows 10 after i updated the nvidia drivers at the last last version .53 , i solved the problem making the windows update , and changed in nvidia control panel optimal power --> high perfomance

it's already on high performance, it's better with 378.78 but the sluggish feel still, also, nheqminer 5.0c don't make this sluggish feel, but the sol/s is ~260
tried with 0.3.3b and 0.3.4b

Do you use afterburner? problems with last updates and AF. I moved to evga precision X

Precision X will only support 4 cards, so if you have more you will still need to use Afterburner.

nUm81

member

Activity: 126

Merit: 11

Quote from: Abcederian on June 20, 2017, 05:25:11 PM

Quote from: agente on June 20, 2017, 09:11:20 PM

I'm done with "When I get in my car it wont start, what's wrong" kind of questions.
People you would help yourself by giving more info about the problem.

How to ask for troubleshooting help V2

http://www.tomshardware.com/forum/264823-31-troubleshooting#t1934282

I apologize for troubling you fellow's

I am still searching for a solution.

This is what is happening. The miner performs fantastic with 4 cards but when I add a fifth card only 3 cards are running. The 2 cards that are not mining show up in the device manager with code 12 - not enough free resources.

This rig consists of the following -

CPU G4400 Skylake 1151
Biostar TB 250
4 gb RAM
4 x MSI 1070 8gb Armor , 1 x MSI 1070 gaming 8gb (all on powered risers)
EVGA 1000 P2
120 gb SSD
Windows 10 64 bit Pro Version 1703 (just updated)

I ran into a similar problem with RX 570's and never quite figured out the driver patch until I watched Cryptomined's video. By then I had already switched over to ethOS. Which by the way runs fantastic. To bad there is no support for Nvidia with it. I have 4 rigs running that presently. Rig5 is the first Nvidia rig and today is the first time I have had more than 4 cards.

If someone could point me to a link or thread or anything I would really appreciate it.

TIA

I think your PSU is too thin on power.
(5 gpu *150w)+(5risers*25w)+100w for the rest= 975w at 82% performance = 1150w.@ the wall.

Thanks for the response.

I swapped out a 1300 from a different rig. I am getting the same result. The four card system is drawing 628 according to a killawatt.
I have searched just about everything I can think of. I haven't even found anyone else having the same problem.

This error won't be related to power or available power, it is most likely due a shortage of PCIe lanes. Are all of your PCIe connectors set to 1.0 or 2.0 in the bios?

TmottaDing

member

Activity: 234

Merit: 10

New Equihash coin mining pool has opened !

http://zcrypt.live

ZEC / Zcash
ZCL / Zclassic
ZEN / Zencash
KMD Komodo

1% pool maintenance fee
0.1 minimum payout
payouts every 10 minutes

asp333

newbie

Activity: 3

Merit: 0

Quote from: asp333 on June 20, 2017, 08:41:53 PM

Quote from: asp333 on June 20, 2017, 08:41:53 PM

hi, since i formatted my pc to move to win7 from win10, ewbf is slowing my desktop, tryed other driver (was using 382.53, now 378.78), any help pls? sol/s is fine, around 300 on both systems, is just the sluggish feel on desktop that i hadn't on win10, my gpu is a gtx 1060 6gb

i`ve had the same problem on windows 10 after i updated the nvidia drivers at the last last version .53 , i solved the problem making the windows update , and changed in nvidia control panel optimal power --> high perfomance

it's already on high performance, it's better with 378.78 but the sluggish feel still, also, nheqminer 5.0c don't make this sluggish feel, but the sol/s is ~260
tried with 0.3.3b and 0.3.4b

Do you use afterburner? problems with last updates and AF. I moved to evga precision X

yes, tested with afterburner off, the sluggish feels still :c

agente

full member

Activity: 239

Merit: 100

hi, since i formatted my pc to move to win7 from win10, ewbf is slowing my desktop, tryed other driver (was using 382.53, now 378.78), any help pls? sol/s is fine, around 300 on both systems, is just the sluggish feel on desktop that i hadn't on win10, my gpu is a gtx 1060 6gb

i`ve had the same problem on windows 10 after i updated the nvidia drivers at the last last version .53 , i solved the problem making the windows update , and changed in nvidia control panel optimal power --> high perfomance

it's already on high performance, it's better with 378.78 but the sluggish feel still, also, nheqminer 5.0c don't make this sluggish feel, but the sol/s is ~260
tried with 0.3.3b and 0.3.4b

Do you use afterburner? problems with last updates and AF. I moved to evga precision X

Abcederian

member

Activity: 71

Merit: 10

Quote from: Abcederian on June 20, 2017, 05:25:11 PM

I'm done with "When I get in my car it wont start, what's wrong" kind of questions.
People you would help yourself by giving more info about the problem.

How to ask for troubleshooting help V2

http://www.tomshardware.com/forum/264823-31-troubleshooting#t1934282

I apologize for troubling you fellow's

I am still searching for a solution.

This is what is happening. The miner performs fantastic with 4 cards but when I add a fifth card only 3 cards are running. The 2 cards that are not mining show up in the device manager with code 12 - not enough free resources.

This rig consists of the following -

CPU G4400 Skylake 1151
Biostar TB 250
4 gb RAM
4 x MSI 1070 8gb Armor , 1 x MSI 1070 gaming 8gb (all on powered risers)
EVGA 1000 P2
120 gb SSD
Windows 10 64 bit Pro Version 1703 (just updated)

I ran into a similar problem with RX 570's and never quite figured out the driver patch until I watched Cryptomined's video. By then I had already switched over to ethOS. Which by the way runs fantastic. To bad there is no support for Nvidia with it. I have 4 rigs running that presently. Rig5 is the first Nvidia rig and today is the first time I have had more than 4 cards.

If someone could point me to a link or thread or anything I would really appreciate it.

TIA

I think your PSU is too thin on power.
(5 gpu *150w)+(5risers*25w)+100w for the rest= 975w at 82% performance = 1150w.@ the wall.

Thanks for the response.

I swapped out a 1300 from a different rig. I am getting the same result. The four card system is drawing 628 according to a killawatt.
I have searched just about everything I can think of. I haven't even found anyone else having the same problem.

asp333

newbie

Activity: 3

Merit: 0

hi, since i formatted my pc to move to win7 from win10, ewbf is slowing my desktop, tryed other driver (was using 382.53, now 378.78), any help pls? sol/s is fine, around 300 on both systems, is just the sluggish feel on desktop that i hadn't on win10, my gpu is a gtx 1060 6gb

i`ve had the same problem on windows 10 after i updated the nvidia drivers at the last last version .53 , i solved the problem making the windows update , and changed in nvidia control panel optimal power --> high perfomance

it's already on high performance, it's better with 378.78 but the sluggish feel still, also, nheqminer 5.0c don't make this sluggish feel, but the sol/s is ~260
tried with 0.3.3b and 0.3.4b

igotek

hero member

Activity: 2170

Merit: 612

Online Security & Investment Corporation

Quote from: Abcederian on June 20, 2017, 05:25:11 PM

hi, since i formatted my pc to move to win7 from win10, ewbf is slowing my desktop, tryed other driver (was using 382.53, now 378.78), any help pls? sol/s is fine, around 300 on both systems, is just the sluggish feel on desktop that i hadn't on win10, my gpu is a gtx 1060 6gb

i`ve had the same problem on windows 10 after i updated the nvidia drivers at the last last version .53 , i solved the problem making the windows update , and changed in nvidia control panel optimal power --> high perfomance

how to change optimal power to high performance ?

sublimus

full member

Activity: 240

Merit: 100

Quote from: BadAstroZA on June 20, 2017, 05:23:19 PM

I'm done with "When I get in my car it wont start, what's wrong" kind of questions.
People you would help yourself by giving more info about the problem.

How to ask for troubleshooting help V2

http://www.tomshardware.com/forum/264823-31-troubleshooting#t1934282

I apologize for troubling you fellow's

I am still searching for a solution.

This is what is happening. The miner performs fantastic with 4 cards but when I add a fifth card only 3 cards are running. The 2 cards that are not mining show up in the device manager with code 12 - not enough free resources.

This rig consists of the following -

CPU G4400 Skylake 1151
Biostar TB 250
4 gb RAM
4 x MSI 1070 8gb Armor , 1 x MSI 1070 gaming 8gb (all on powered risers)
EVGA 1000 P2
120 gb SSD
Windows 10 64 bit Pro Version 1703 (just updated)

I ran into a similar problem with RX 570's and never quite figured out the driver patch until I watched Cryptomined's video. By then I had already switched over to ethOS. Which by the way runs fantastic. To bad there is no support for Nvidia with it. I have 4 rigs running that presently. Rig5 is the first Nvidia rig and today is the first time I have had more than 4 cards.

If someone could point me to a link or thread or anything I would really appreciate it.

TIA

I think your PSU is too thin on power.
(5 gpu *150w)+(5risers*25w)+100w for the rest= 975w at 82% performance = 1150w.@ the wall.

cannonfodder

full member

Activity: 178

Merit: 100

What application are you using to get that image?

Also, why does a GPU reject a share?

Using the api option in the miner and going to the address in a web browser is all.

Your GPU isn't rejecting the share, the pool is. You find a share and submit it, but it reaches the pool after it's already moved on to the next block, that's why it's rejected.

ayke99

newbie

Activity: 39

Merit: 0

hi, since i formatted my pc to move to win7 from win10, ewbf is slowing my desktop, tryed other driver (was using 382.53, now 378.78), any help pls? sol/s is fine, around 300 on both systems, is just the sluggish feel on desktop that i hadn't on win10, my gpu is a gtx 1060 6gb

i`ve had the same problem on windows 10 after i updated the nvidia drivers at the last last version .53 , i solved the problem making the windows update , and changed in nvidia control panel optimal power --> high perfomance

asp333

newbie

Activity: 3

Merit: 0

hi, since i formatted my pc to move to win7 from win10, ewbf is slowing my desktop, tryed other driver (was using 382.53, now 378.78), any help pls? sol/s is fine, around 300 on both systems, is just the sluggish feel on desktop that i hadn't on win10, my gpu is a gtx 1060 6gb

Abcederian

member

Activity: 71

Merit: 10