Topic: EWBF&#039;s CUDA Zcash miner - page 132. (Read 2164327 times)

Quote from: philipma1957 on June 15, 2017, 08:55:05 AM

1070 performance on 0.3.4b? Anyone? Cheesy

I just received my first 1070 yesterday.
(an EVGA FTW, just running at stock speeds now)
Still new at this, have been using EWBF for about a week.

EWBF says ~445 Sol/s, 150W. The watts figure closely matches my Kill-A-Watt. The Sol/s seem reasonable.

Good luck!

ayke99

newbie

Activity: 39

Merit: 0

hi i`m new to ming and i have a problem/question: why 1 card is not on the same performance as the other 3 always is a difference between,is there a bios setting or something like this that i`m missing ?

my mining rig :mobo z270 a prime (bios up to date , above 4g enable set, video on mobo ), 4 gtx 1080ti gaming x clock +150 +400 :
1.GeForce GTX 1080 Ti   64 C   206 W   753 Sol/s   3.66 Sol/W
2.GeForce GTX 1080 Ti   61 C   208 W   752 Sol/s   3.62 Sol/W
3.GeForce GTX 1080 Ti   58 C   206 W   753 Sol/s   3.66 Sol/W
4.GeForce GTX 1080 Ti   65 C   204 W   724 Sol/s   3.51 Sol/W

PCIx Lane speed?

x16 x1 x1 x16 always is a difference of 16 20 sol/s not a big deal but i`m currios what`s happening , when i raise the power limit to 100% the boost clock only gets to 1890 mhz , the other 3 are at 1911mhz at 100% tdp , can this clock damage my card ?

why would you raise to 100% would you drive your card with the speedometer pinned to the max 24/7/365?

your 4 cards are doing well at 208 watts you get 753 sol/s and one is lower

no i`m happy with that ~745 at 80% , just noticing that at 100 % tdp that card can`t move the clock higher like the other ones

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

hi i`m new to ming and i have a problem/question: why 1 card is not on the same performance as the other 3 always is a difference between,is there a bios setting or something like this that i`m missing ?

my mining rig :mobo z270 a prime (bios up to date , above 4g enable set, video on mobo ), 4 gtx 1080ti gaming x clock +150 +400 :
1.GeForce GTX 1080 Ti   64 C   206 W   753 Sol/s   3.66 Sol/W
2.GeForce GTX 1080 Ti   61 C   208 W   752 Sol/s   3.62 Sol/W
3.GeForce GTX 1080 Ti   58 C   206 W   753 Sol/s   3.66 Sol/W
4.GeForce GTX 1080 Ti   65 C   204 W   724 Sol/s   3.51 Sol/W

PCIx Lane speed?

x16 x1 x1 x16 always is a difference of 16 20 sol/s not a big deal but i`m currios what`s happening , when i raise the power limit to 100% the boost clock only gets to 1890 mhz , the other 3 are at 1911mhz at 100% tdp , can this clock damage my card ?

why would you raise to 100% would you drive your card with the speedometer pinned to the max 24/7/365?

your 4 cards are doing well at 208 watts you get 753 sol/s and one is lower

xgodprotopskill

newbie

Activity: 16

Merit: 0

hi i`m new to ming and i have a problem/question: why 1 card is not on the same performance as the other 3 always is a difference between,is there a bios setting or something like this that i`m missing ?

my mining rig :mobo z270 a prime (bios up to date , above 4g enable set, video on mobo ), 4 gtx 1080ti gaming x clock +150 +400 :
1.GeForce GTX 1080 Ti   64 C   206 W   753 Sol/s   3.66 Sol/W
2.GeForce GTX 1080 Ti   61 C   208 W   752 Sol/s   3.62 Sol/W
3.GeForce GTX 1080 Ti   58 C   206 W   753 Sol/s   3.66 Sol/W
4.GeForce GTX 1080 Ti   65 C   204 W   724 Sol/s   3.51 Sol/W

I have same problem, but on much larger scale. Got 6x GTX 1060 and Z270A PRO mbo, all cards on risers and last gpu connected on mbo gives only half power.

This is my stats in ewbf:
https://i.imgur.com/DkWuERI.png

ayke99

newbie

Activity: 39

Merit: 0

Quote from: CCNZ on June 15, 2017, 06:03:09 AM

Anyone experiencing an issue with the API? I've it turned on within the cfg and only receiving characters...those are looks fine, but...I want the fancy one Cheesy

use http://127.0.0.1:42000 (or whatever you put after --api)

use like this --api 0.0.0.0:42000 or --api 192.168.1.*:42000
* cmd ipconfig see your local ip
check you windows firewall to allow

ayke99

newbie

Activity: 39

Merit: 0

Quote from: agente on June 15, 2017, 05:51:02 AM

hi i`m new to ming and i have a problem/question: why 1 card is not on the same performance as the other 3 always is a difference between,is there a bios setting or something like this that i`m missing ?

my mining rig :mobo z270 a prime (bios up to date , above 4g enable set, video on mobo ), 4 gtx 1080ti gaming x clock +150 +400 :
1.GeForce GTX 1080 Ti   64 C   206 W   753 Sol/s   3.66 Sol/W
2.GeForce GTX 1080 Ti   61 C   208 W   752 Sol/s   3.62 Sol/W
3.GeForce GTX 1080 Ti   58 C   206 W   753 Sol/s   3.66 Sol/W
4.GeForce GTX 1080 Ti   65 C   204 W   724 Sol/s   3.51 Sol/W

PCIx Lane speed?

x16 x1 x1 x16 always is a difference of 16 20 sol/s not a big deal but i`m currios what`s happening , when i raise the power limit to 100% the boost clock only gets to 1890 mhz , the other 3 are at 1911mhz at 100% tdp , can this clock damage my card ?

Same for me. I try to lower the power of other GPUs and speed of 'weak' gpu back to normal. I really don't understand. What drivers are you using?

I updated the nvidia driver to ver 382.53 but i have problems with afterburner stability so i`m on 382.33 version , its not a big deal but it is strange how 1 lane performs less than other

CCNZ

newbie

Activity: 14

Merit: 0

Anyone experiencing an issue with the API? I've it turned on within the cfg and only receiving characters...those are looks fine, but...I want the fancy one Cheesy

agente

full member

Activity: 239

Merit: 100

Quote from: majorlee on June 14, 2017, 07:20:17 PM

hi i`m new to ming and i have a problem/question: why 1 card is not on the same performance as the other 3 always is a difference between,is there a bios setting or something like this that i`m missing ?

my mining rig :mobo z270 a prime (bios up to date , above 4g enable set, video on mobo ), 4 gtx 1080ti gaming x clock +150 +400 :
1.GeForce GTX 1080 Ti   64 C   206 W   753 Sol/s   3.66 Sol/W
2.GeForce GTX 1080 Ti   61 C   208 W   752 Sol/s   3.62 Sol/W
3.GeForce GTX 1080 Ti   58 C   206 W   753 Sol/s   3.66 Sol/W
4.GeForce GTX 1080 Ti   65 C   204 W   724 Sol/s   3.51 Sol/W

PCIx Lane speed?

x16 x1 x1 x16 always is a difference of 16 20 sol/s not a big deal but i`m currios what`s happening , when i raise the power limit to 100% the boost clock only gets to 1890 mhz , the other 3 are at 1911mhz at 100% tdp , can this clock damage my card ?

Same for me. I try to lower the power of other GPUs and speed of 'weak' gpu back to normal. I really don't understand. What drivers are you using?

kjs

full member

Activity: 188

Merit: 105

Quote from: kjs on June 14, 2017, 05:51:23 PM

Nothing particularly special, here are the settings:

Code:

nvidia-smi -pm 1
nvidia-smi -acp 0
nvidia-smi -pl 300
nvidia-settings -a GPUPowerMizerMode=1
nvidia-settings -a GPUFanControlState=1
nvidia-settings -a GPUTargetFanSpeed=100
nvidia-settings -a GPUGraphicsClockOffset[3]=100

you put those in the bat file or in the cfg file?

I am running Ubuntu Linux, so it goes into a .bash file.

ayke99

newbie

Activity: 39

Merit: 0

hi i`m new to ming and i have a problem/question: why 1 card is not on the same performance as the other 3 always is a difference between,is there a bios setting or something like this that i`m missing ?

my mining rig :mobo z270 a prime (bios up to date , above 4g enable set, video on mobo ), 4 gtx 1080ti gaming x clock +150 +400 :
1.GeForce GTX 1080 Ti   64 C   206 W   753 Sol/s   3.66 Sol/W
2.GeForce GTX 1080 Ti   61 C   208 W   752 Sol/s   3.62 Sol/W
3.GeForce GTX 1080 Ti   58 C   206 W   753 Sol/s   3.66 Sol/W
4.GeForce GTX 1080 Ti   65 C   204 W   724 Sol/s   3.51 Sol/W

PCIx Lane speed?

x16 x1 x1 x16 always is a difference of 16 20 sol/s not a big deal but i`m currios what`s happening , when i raise the power limit to 100% the boost clock only gets to 1890 mhz , the other 3 are at 1911mhz at 100% tdp , can this clock damage my card ?

prologas

member

Activity: 219

Merit: 30

hi i`m new to ming and i have a problem/question: why 1 card is not on the same performance as the other 3 always is a difference between,is there a bios setting or something like this that i`m missing ?

my mining rig :mobo z270 a prime (bios up to date , above 4g enable set, video on mobo ), 4 gtx 1080ti gaming x clock +150 +400 :
1.GeForce GTX 1080 Ti   64 C   206 W   753 Sol/s   3.66 Sol/W
2.GeForce GTX 1080 Ti   61 C   208 W   752 Sol/s   3.62 Sol/W
3.GeForce GTX 1080 Ti   58 C   206 W   753 Sol/s   3.66 Sol/W
4.GeForce GTX 1080 Ti   65 C   204 W   724 Sol/s   3.51 Sol/W

PCIx Lane speed?

ayke99

newbie

Activity: 39

Merit: 0

hi i`m new to ming and i have a problem/question: why 1 card is not on the same performance as the other 3 always is a difference between,is there a bios setting or something like this that i`m missing ?

my mining rig :mobo z270 a prime (bios up to date , above 4g enable set, video on mobo ), 4 gtx 1080ti gaming x clock +150 +400 :
1.GeForce GTX 1080 Ti   64 C   206 W   753 Sol/s   3.66 Sol/W
2.GeForce GTX 1080 Ti   61 C   208 W   752 Sol/s   3.62 Sol/W
3.GeForce GTX 1080 Ti   58 C   206 W   753 Sol/s   3.66 Sol/W
4.GeForce GTX 1080 Ti   65 C   204 W   724 Sol/s   3.51 Sol/W

kangjooe

newbie

Activity: 36

Merit: 0

guys... what is the factor for mining speed in equihash? is it bigger core clock or memory clock? and is that true that 280X is perform the same to 1060?
and one more... is it better mining in win 7 or win 10?

thanks before Cheesy

xgtele

sr. member

Activity: 288

Merit: 250

kjs, can you tell briefly about Nvidia drivers installation on your Ubuntu 16.04.2 LTS? Are you using a server?

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: bonosurgut on June 14, 2017, 12:54:45 PM