Topic: EWBF's CUDA Zcash miner - page 159. (Read 2164327 times)
can i run this miner in a gtx 560? it says 0 Sols/s...
Finally, I get working Ubuntu 16.04 with nvidia OC/PowerLimit/Fans control. Bye Bye piece of shit windows! How you guys can keep it on W10 then MS rebooting your RIGS with autoupdate?
Some notes here:
Windows version + msi afterburner not stable for me with power limits. Linux keeps it like rock. For example 68-71W For 70W limit. So I squeezed 270 Sol/s with 70W on gtx1060 Impossible with Windows or not stable..
Some notes here:
Windows version + msi afterburner not stable for me with power limits. Linux keeps it like rock. For example 68-71W For 70W limit. So I squeezed 270 Sol/s with 70W on gtx1060 Impossible with Windows or not stable..
good job wiht the last version, i'm getting 480 sol with 75% tdp on palit super jet stream 1070, memory need to be pushed very high for this like 600+, but it's perfectly stable
1st score is a single EVGA 1070 FTW - 70% TDP (128-130W) Was offline for about an hour that is why the average is only 450, its normally around 470.
Wow, on what frequencies does your EVGA 1070 FTW work with TDP 130W? I felt like this miner needs some more work, I saw the other guy mining with a rx 480, a bit modded and claymore miner and he got around 350~. While I'm barely getting around 340 on 1060 6gb OC'd.
Are you serious? your pissing and complaining that a guy with a 480 who paid 250-325 for their card is getting 10 more sol's than your 1060 that you paid 179-219 for??? Go troll somewhere else
I'm not complaining, I just ask that if the dev can push more power from optimizing the code or not.
Has anyone had luck getting the miner to run on GTX 1080 TI Founder's Edition?
This is my current configuration... Workers fail with no real error info...
Nvidia Driver: 381.22 (Ubuntu 16)
CUDA Version: 8.0.61
This is my current configuration... Workers fail with no real error info...
Nvidia Driver: 381.22 (Ubuntu 16)
CUDA Version: 8.0.61
Not founders edition, but I have two 1070/1080ti mixed rigs running 375.66 just fine. The 381 series drivers are beta, so I would stick with the latest stable 37x.xx drivers.
80% TDP gives around 470-80sol on 1070 with EWBF's miner...
Not on my rigs. The EWBF miner seem to be slow when you run 6 cards in the rig. (meassured on the pool)
I am testing on a 6 gtx 1070 rig and a 1840 celeron cpu / 4gig ram. (80% tdp with oc gigabyte g1 gaming)
Reported in the miner window 2700 (450 sol/s per card
Reported on the pool 24h (flypool.org) 2500 (416.66 sol/s per card)
I did a test with more than one rig, and all of them can't break 2500 with 6x 1070 cards using the EWBF miner.
Even on a single-card rig I've never managed over 450ish with a 1070, and at 80% think I've yet to see over 430 or so. Your G1 Gaming cards stock clock a hair higher than my 2-fan models though.
To go6ooo1212 - TDP VARIES - my Gigabyte full-length 1070s have a 180 watt TDP, while my EVGA SC 1070s and my ITX Gigabyte 1070s are TDP 154 or 155 watts - stating "80% TDP" doesn't mean anything if you don't state the specific card model or specify the watts.
1st score is a single EVGA 1070 FTW - 70% TDP (128-130W) Was offline for about an hour that is why the average is only 450, its normally around 470.
2nd score is a 6 x EVGA 1070 SC Black - 85% TDP (128 - 130W) steady at 2,700 to the pool
Has anyone had luck getting the miner to run on GTX 1080 TI Founder's Edition?
This is my current configuration... Workers fail with no real error info...
Nvidia Driver: 381.22 (Ubuntu 16)
CUDA Version: 8.0.61
This is my current configuration... Workers fail with no real error info...
Nvidia Driver: 381.22 (Ubuntu 16)
CUDA Version: 8.0.61
80% TDP gives around 470-80sol on 1070 with EWBF's miner...
Not on my rigs. The EWBF miner seem to be slow when you run 6 cards in the rig. (meassured on the pool)
I am testing on a 6 gtx 1070 rig and a 1840 celeron cpu / 4gig ram. (80% tdp with oc gigabyte g1 gaming)
Reported in the miner window 2700 (450 sol/s per card
Reported on the pool 24h (flypool.org) 2500 (416.66 sol/s per card)
I did a test with more than one rig, and all of them can't break 2500 with 6x 1070 cards using the EWBF miner.
Even on a single-card rig I've never managed over 450ish with a 1070, and at 80% think I've yet to see over 430 or so. Your G1 Gaming cards stock clock a hair higher than my 2-fan models though.
To go6ooo1212 - TDP VARIES - my Gigabyte full-length 1070s have a 180 watt TDP, while my EVGA SC 1070s and my ITX Gigabyte 1070s are TDP 154 or 155 watts - stating "80% TDP" doesn't mean anything if you don't state the specific card model or specify the watts.
80% TDP gives around 470-80sol on 1070 with EWBF's miner...
Not on my rigs. The EWBF miner seem to be slow when you run 6 cards in the rig. (meassured on the pool)
I am testing on a 6 gtx 1070 rig and a 1840 celeron cpu / 4gig ram. (80% tdp with oc gigabyte g1 gaming)
Reported in the miner window 2700 (450 sol/s per card
Reported on the pool 24h (flypool.org) 2500 (416.66 sol/s per card)
I did a test with more than one rig, and all of them can't break 2500 with 6x 1070 cards using the EWBF miner.
I downloaded zec miner,
how can I insert my wallet to receive the coin, i cannot see this
i just clicked in suprnova and started the processs, fine it is mining but where is going my mined coins? hahaha
see: http://imgur.com/a/sgQxf
how can I insert my wallet to receive the coin, i cannot see this
i just clicked in suprnova and started the processs, fine it is mining but where is going my mined coins? hahaha
see: http://imgur.com/a/sgQxf
i am using cpu
Fuck VEGA
Gtx1080ti FE
Gtx1080ti FE
2.6 Sol/watt
You must have free electricity!
found out,
am i using my gpu or cpu? please see the screen
http://imgur.com/a/0p8z4
LOOKS LIKE I AM NOT USING 100% OF MY Gpu
http://imgur.com/a/Sbxbk
thank you
am i using my gpu or cpu? please see the screen
http://imgur.com/a/0p8z4
LOOKS LIKE I AM NOT USING 100% OF MY Gpu
http://imgur.com/a/Sbxbk
thank you
I did download the program
but where I can Insert my wallet to receive the coins? I could not find
but where I can Insert my wallet to receive the coins? I could not find
Fuck VEGA
Gtx1080ti FE
Gtx1080ti FE
Nice results, what kind of OC are you using and how are the temps and noise of the Founders Edition? i'm considering buying one.
Thanks!
50 sols on average for the 750ti, excellent!
I see a hair over 50 on stock clock HD 7750 cards with Claymore 9.2 (later versions are no faster on that low-end card) - the 750ti has 128 more cores, clocks higher, has faster memory.
I'd expect the 750ti to be capable of more like 70-90 sol/sec ballpark.
A very irritating minus this software shares with Claymore but is even WORSE - the DARK colors on a BLACK background make it almost impossible to READ anything on this miner.
miner --help doesn't do any good when you can't READ it due to no contrast between the text and the background.
On the plus side, performance on the 10xx series betters Claymore and Nicehash in my limited testing so far, and that's a lot more important than any other factor.
I felt like this miner needs some more work, I saw the other guy mining with a rx 480, a bit modded and claymore miner and he got around 350~. While I'm barely getting around 340 on 1060 6gb OC'd.
Are you serious? your pissing and complaining that a guy with a 480 who paid 250-325 for their card is getting 10 more sol's than your 1060 that you paid 179-219 for??? Go troll somewhere else
this miner is awesome, most stable piece of work i have used so far since 2014 (linux-nvidia), i pay my 2% fee and i am happy!
no complains, no request, just gratitude for an excellent work from EWBF.
btw, i am on linux 1404 LTS, runing on 1060s, 1070s and 1080s. (different rigs of course!)
I felt like this miner needs some more work, I saw the other guy mining with a rx 480, a bit modded and claymore miner and he got around 350~. While I'm barely getting around 340 on 1060 6gb OC'd.
Are you serious? your pissing and complaining that a guy with a 480 who paid 250-325 for their card is getting 10 more sol's than your 1060 that you paid 179-219 for??? Go troll somewhere else
Jump to: