Flypool is a ZEC pool, NOT a "ZEN" pool - whatever ZEN is.
For a start, if you want to mine ZEN you need to use a ZEN pool.
Topic: EWBF's CUDA Zcash miner - page 157. (Read 2164327 times)
Trying to setup for ZENcash
Zec miner 0.3.3b
Using: miner.exe --server us1-zcash.flypool.org:3333 --user t1UvD6JW5yXLX5ZjyCJjLcZjRpexN6CDyJv.MikaMain --pass x --port 3333 --cuda_devices 0
Eloes Wallet
Miner will not start....any suggestions
Is there anything I need to do for ZEN?
Zec miner 0.3.3b
Using: miner.exe --server us1-zcash.flypool.org:3333 --user t1UvD6JW5yXLX5ZjyCJjLcZjRpexN6CDyJv.MikaMain --pass x --port 3333 --cuda_devices 0
Eloes Wallet
Miner will not start....any suggestions
Is there anything I need to do for ZEN?
my settings for gtx 1060 6gb
My result with a EVGA 1080 blower fan (1746@5005MHz 0.80v)
Thanks dev!
Thanks dev!
Can you tell me, how to run the miner in PowerShell? I'm not very familiar with it. Does it have some kind advantages like running scripts or something compared to cmd?
My result with a EVGA 1080 blower fan (1746@5005MHz 0.80v)
Thanks dev!
Thanks dev!
what miner is that looks really cool miner
300sol for gtx1060 is normal? I am using the full power?
another thing what algorithm of digibyte I should mine?
Digibyte (Groestl)
Digibyte (Qubit)
Digibyte (Skein)
thanks
another thing what algorithm of digibyte I should mine?
Digibyte (Groestl)
Digibyte (Qubit)
Digibyte (Skein)
thanks
I rarely get 300sol on my 1060 cuz of heat problem my cards always on 80C i so i limit them not to go above
but in the start of the mining i get usually 280-295 ive seen some 300 but rarely
I get 314-325sol/s with Asus Dual GTX 1060 6GB version. +155 +750, 70C 2000rpm
300sol for gtx1060 is normal? I am using the full power?
another thing what algorithm of digibyte I should mine?
Digibyte (Groestl)
Digibyte (Qubit)
Digibyte (Skein)
thanks
another thing what algorithm of digibyte I should mine?
Digibyte (Groestl)
Digibyte (Qubit)
Digibyte (Skein)
thanks
I rarely get 300sol on my 1060 cuz of heat problem my cards always on 80C i so i limit them not to go above
but in the start of the mining i get usually 280-295 ive seen some 300 but rarely
Digibyte (Groestl)
Digibyte (Qubit)
Digibyte (Skein)
Qubit is supported by the Baikal ASIC as I recall, so likely not a good choice.
I do note you are being sensible and ignoring Scrypt and SHA256 options. 8-)
Best option is to try your card on each and see what kind of hashrate it does then compare to the network hashrate and pick the highest ratio of yours/net.
You made quite a good work.
I think the API could have some attention...
And... devfee is ok.
Question,
1. can I mine at the same time to two different addresses?
2. when I put the parameter --help the window of the miner crashes immediately...
Is there a way to fix or maybe check the HELP information on another source?
I should run the batch files, right?
I think the API could have some attention...
And... devfee is ok.
Question,
1. can I mine at the same time to two different addresses?
2. when I put the parameter --help the window of the miner crashes immediately...
Is there a way to fix or maybe check the HELP information on another source?
I should run the batch files, right?
Just do -h that shows the help, you are correct that --help seems to crash
You made quite a good work.
I think the API could have some attention...
And... devfee is ok.
Question,
1. can I mine at the same time to two different addresses?
2. when I put the parameter --help the window of the miner crashes immediately...
Is there a way to fix or maybe check the HELP information on another source?
I should run the batch files, right?
I think the API could have some attention...
And... devfee is ok.
Question,
1. can I mine at the same time to two different addresses?
2. when I put the parameter --help the window of the miner crashes immediately...
Is there a way to fix or maybe check the HELP information on another source?
I should run the batch files, right?
Hi rednoW,
where are you getting the different BIOSes from?
are nvidia bioses still locked/encrypted from editing, unlike radeons?
There are bioses from vendor. For palit gtx1070 you can check here https://www.techpowerup.com/vgabios/?manufacturer=Palit&model=GTX+1070where are you getting the different BIOSes from?
are nvidia bioses still locked/encrypted from editing, unlike radeons?
Or from official palit site
300sol for gtx1060 is normal? I am using the full power?
another thing what algorithm of digibyte I should mine?
Digibyte (Groestl)
Digibyte (Qubit)
Digibyte (Skein)
thanks
another thing what algorithm of digibyte I should mine?
Digibyte (Groestl)
Digibyte (Qubit)
Digibyte (Skein)
thanks
I'm using driver 378.13 on Ubuntu 16.04 server and headless with a 1080 Ti. It only uses as much memory as my 1080's so nearly half of the memory is unused. I suspect things could be massively improved on the card. I'm getting 650 sol/s on the card currently with stock settings.
GDDR 5x has higher lag than GDDR 5, which is a small handicap for the 1080 and 1080ti vs the 1070 and 1060.
It hurts a LOT more on coins like ETH where memory access is the primary limit on hashrate though.
very mediocre result.
palit sjs 1070 can do 490sols@130w stable
palit sjs 1070 can do 490sols@130w stable
How?!? How did you get such results? Please, show your frequencies!
Unfortunately, the LARGE majority of 10xx series cards can't come CLOSE to handling that kind of OC on the RAM, much less reliably.
Hi guys,
I just started mining zcash with my GTX 1080 (Asus Strix), but I only get around 260 Sol/s. Is it because I mine on win10? Are there preferred drivers?
I just started mining zcash with my GTX 1080 (Asus Strix), but I only get around 260 Sol/s. Is it because I mine on win10? Are there preferred drivers?
I have 1080 Strix and get 550Sol.
Thanks for the reply! Are you on win10? Which drivers?
EDIT: Ok, I changed drivers and I get around 550 Sol too now.
Hi guys,
I just started mining zcash with my GTX 1080 (Asus Strix), but I only get around 260 Sol/s. Is it because I mine on win10? Are there preferred drivers?
I just started mining zcash with my GTX 1080 (Asus Strix), but I only get around 260 Sol/s. Is it because I mine on win10? Are there preferred drivers?
I have 1080 Strix and get 550Sol.
Hi guys,
I just started mining zcash with my GTX 1080 (Asus Strix), but I only get around 260 Sol/s. Is it because I mine on win10? Are there preferred drivers?
I just started mining zcash with my GTX 1080 (Asus Strix), but I only get around 260 Sol/s. Is it because I mine on win10? Are there preferred drivers?
Hi rednoW,
where are you getting the different BIOSes from?
are nvidia bioses still locked/encrypted from editing, unlike radeons?
where are you getting the different BIOSes from?
are nvidia bioses still locked/encrypted from editing, unlike radeons?
I ll send when i have been at home
can you help what to doCUDA: Device: 5 Thread exited with code: 4
CUDA: Device: 1 Thread exited with code: 4
CUDA: Device: 3 Thread exited with code: 4
CUDA: Device: 0 Thread exited with code: 4
CUDA: Device: 2 Thread exited with code: 4
CUDA: Device: 4 Thread exited with code: 4
try lowering your core and memory frequencies...
What are you clock, memory and TDP settings in watts?
Are you getting driver crashes in your system event log?
Have you tried reseating all of your riser cables and power connectors?
What power supply are you using?
You said in your first post that you have 7 GTX 1070s? The miner is only using 6 by looking at that log. Do you actually have 7?
I've been getting the same errors on one rig for some reason. It crashes totally at random. I have even reset Afterburner to stock settings and still get the error?
Jump to: