Topic: EWBF's CUDA Zcash miner - page 207. (Read 2164327 times)
0% speed my gtx 1070 x 2
0% speed up on 10xx
looks like claymore only worked on API+temperature support
shame no competition no dev care for speed optimization
looks like claymore only worked on API+temperature support
shame no competition no dev care for speed optimization
0% increase for me with gtx 1070 and gtx 1060/3.
0.3.0.b is at least a 5% increase for me (GTX 960). Thanks!
Edit: looks like a 7.5% improvement.
Edit: looks like a 7.5% improvement.
any one with zotac 1060 mini? whats the hashrate? any heat issues? only 1 fan.
Would also like to know. Getting cheaper in my country. 1060 seems to be pretty cool compared to 1070 and 1080I bought one 1060-mini to test it out, and it performed almost the same as a dual-fan card. Almost.. I found it hard to control the heat from a "max out OC", it was running too hot and too stressed out for my likings. Then again I did not test it fully out with normal clocks or under clock (I was not going to use it that way). I swapped mine for a dualfan and since that I bought 24 more 1060's. Rock solid setup, 5 cards pr rig and they are running maxed out OC with ver. 0.2.0b miner, and they are using "solver 0", temps 65-68c. 300~5 sol pr card (3bg) are my results and exp with the 1060's.
Thanks. Will go for the dual fan.
I must add: I'm in a cool environment, and have very good ventilation where the rigs are located.
3gb 1060 runs @ 300 sol? Not too shabby! How many sol's at factory speeds?
My 1060 3GB cards run at 275 Sol and 80-82watts.. 555watts for a full system
any one with zotac 1060 mini? whats the hashrate? any heat issues? only 1 fan.
Would also like to know. Getting cheaper in my country. 1060 seems to be pretty cool compared to 1070 and 1080I bought one 1060-mini to test it out, and it performed almost the same as a dual-fan card. Almost.. I found it hard to control the heat from a "max out OC", it was running too hot and too stressed out for my likings. Then again I did not test it fully out with normal clocks or under clock (I was not going to use it that way). I swapped mine for a dualfan and since that I bought 24 more 1060's. Rock solid setup, 5 cards pr rig and they are running maxed out OC with ver. 0.2.0b miner, and they are using "solver 0", temps 65-68c. 300~5 sol pr card (3bg) are my results and exp with the 1060's.
Thanks. Will go for the dual fan.
I must add: I'm in a cool environment, and have very good ventilation where the rigs are located.
3gb 1060 runs @ 300 sol? Not too shabby! How many sol's at factory speeds?
Pretty new to EWBF miner, so anybody can let me know if this miner have command like -tstop 90?
No such command yet.You can control temp through MSI Afterburner when you install the Fan Control app that comes with it.
Thanks for the quick reply. More question
1) What driver version do I need for Palit GTX 1060 3g StormX to use EWBF efficiently?
2) Can I use window 7 as my operating system? Also can window 7 support 6 GPU GTX 1060?
Thanks in advance...
latest.
yes.
Pretty new to EWBF miner, so anybody can let me know if this miner have command like -tstop 90?
No such command yet.You can control temp through MSI Afterburner when you install the Fan Control app that comes with it.
Thanks for the quick reply. More question
1) What driver version do I need for Palit GTX 1060 3g StormX to use EWBF efficiently?
2) Can I use window 7 as my operating system? Also can window 7 support 6 GPU GTX 1060?
Thanks in advance...
Pretty new to EWBF miner, so anybody can let me know if this miner have command like -tstop 90?
No such command yet.You can control temp through MSI Afterburner when you install the Fan Control app that comes with it.
Pretty new to EWBF miner, so anybody can let me know if this miner have command like -tstop 90?
@EWBF:
Would be nice switch.
Ability to Stop/Start a card for troubleshooting.
ex. Press a # to stop that card.
Would be nice switch.
Ability to Stop/Start a card for troubleshooting.
ex. Press a # to stop that card.
any one with zotac 1060 mini? whats the hashrate? any heat issues? only 1 fan.
Would also like to know. Getting cheaper in my country. 1060 seems to be pretty cool compared to 1070 and 1080I bought one 1060-mini to test it out, and it performed almost the same as a dual-fan card. Almost.. I found it hard to control the heat from a "max out OC", it was running too hot and too stressed out for my likings. Then again I did not test it fully out with normal clocks or under clock (I was not going to use it that way). I swapped mine for a dualfan and since that I bought 24 more 1060's. Rock solid setup, 5 cards pr rig and they are running maxed out OC with ver. 0.2.0b miner, and they are using "solver 0", temps 65-68c. 300~5 sol pr card (3bg) are my results and exp with the 1060's.
Thanks. Will go for the dual fan.
I must add: I'm in a cool environment, and have very good ventilation where the rigs are located.
any one with zotac 1060 mini? whats the hashrate? any heat issues? only 1 fan.
Would also like to know. Getting cheaper in my country. 1060 seems to be pretty cool compared to 1070 and 1080I bought one 1060-mini to test it out, and it performed almost the same as a dual-fan card. Almost.. I found it hard to control the heat from a "max out OC", it was running too hot and too stressed out for my likings. Then again I did not test it fully out with normal clocks or under clock (I was not going to use it that way). I swapped mine for a dualfan and since that I bought 24 more 1060's. Rock solid setup, 5 cards pr rig and they are running maxed out OC with ver. 0.2.0b miner, and they are using "solver 0", temps 65-68c. 300~5 sol pr card (3bg) are my results and exp with the 1060's.
Thanks. Will go for the dual fan.
well claymore has left his new zec miner, V12
Now it's up to EWBF to release its
Now it's up to EWBF to release its
Any speed increase info?
I got a segmentation fault trying to run on a Quadro K4000. It doesn't work or did I do something wrong?
He stated to me that SHA256 is not interesting for him. So no there is miner of him for Pascalcoin
please tell me this file shows trojans in Zec miner 0.2.0b.zip is it false??
screenshot from virustotal
http://imgur.com/a/P5UGV
screenshot from virustotal
http://imgur.com/a/P5UGV
From page 49 you can read all about this, and a reply from dev.
Always download from source (links on page 1), and always run miners in a non sensitive controlled environment. Just a tip, happy mining
All righty... I think I should go with 1070 too...
thanks @PressEnterNoaw
thanks @PressEnterNoaw
You're welcome!
Prices and use may be different around the world, but I try to upgrade with one rig at the time. I'm always looking for special offers and discounts, gpu's and psu's being the most expencive in a setup, lots of fiat to save by waiting for a good deal.
please tell me this file shows trojans in Zec miner 0.2.0b.zip is it false??
screenshot from virustotal
screenshot from virustotal
Jump to: