Topic: EWBF's CUDA Zcash miner - page 273. (Read 2164327 times)
Why my gtx780 of 3 GB. memory is only 900 MB? Maybe because of this speed is only 80 sol / s?
On both my Nvidia 1060 rigs the below has started happening on a daily basis and all mining stops. To get it started again I have to close the app and re-open it. Is there a command switch like with Claymore that will make the miner restart in the event of a crash? Any idea why this is happening? Both rigs are I5 4th generation on windows 10 64-bit running 375.95 nvidia drivers.
Thanks,
https://drive.google.com/file/d/0B3dNJn9a2qfhcDFxc3ROMEdseDg/view?usp=sharing
Thanks,
https://drive.google.com/file/d/0B3dNJn9a2qfhcDFxc3ROMEdseDg/view?usp=sharing
nah ewbf is a clear different, one is GPU heavy and use a lot less memory controller, I bet if they would share code, we can see 500sol on OC-ed 1070 
SUCK AMD!
SUCK AMD!
NVIDIA Trol
Are you ppl insane or what??
Vega is 3 month from shop and some proper availability, and performance will be in par with 1080, HBM2 memory still is not good for memory intensive mining so zcash and ETH will prolly be slow, but we need to see it first/test, and only then someone need to make use of 4096bit memory interface and very slow access time!
NV 1070 is not hot it use less power then RX 480, FFS stop FUD and shit if you know nothing at all
And we don`t need to match speed in zcash for nice hash miner we need 400+ sol/s !
nah ewbf is a clear different, one is GPU heavy and use a lot less memory controller, I bet if they would share code, we can see 500sol on OC-ed 1070
SUCK AMD!
SUCK AMD!
NVIDIA Trol
Cmon dev, we want nicehash miner speeds on your miner
nah ewbf is a clear different, one is GPU heavy and use a lot less memory controller, I bet if they would share code, we can see 500sol on OC-ed 1070
SUCK AMD!
SUCK AMD!
NVIDIA Trol
ah yeah, but it's the same for the EWBF miner, but i'm getting 260 sol for each gpu instead of 306
That's not the ewbf miner. Is that nicehash?
dude you can have 260 sol at 100 watt, don't waste electricity, tweak it right, 55% tdp is the key, then just oc mem and a bit the core
could u print screen your msi afterburner settings with tdp 55%? tks a lot!
does the cpu matters using 5 gpus?
no just use the cheap 1840 from intel
here
1080
Gigabyte G1
Set Powerlimit 100%
Used Power 75-90 % of 200 Watt --> 160 Watt (80%) --> 1,875 Sol per Watt
300 -310 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,893 Sol per Watt
265 Sols
1070
Gigabyte G1
Set Powerlimit 100%
Used Power 85 % of 200 Watt --> 170 Watt (85%)--> 1,51 Sol per Watt
257 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,82 Sol per Watt
255 Sols
Didnt test Ram OC
Gigabyte G1
Set Powerlimit 100%
Used Power 75-90 % of 200 Watt --> 160 Watt (80%) --> 1,875 Sol per Watt
300 -310 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,893 Sol per Watt
265 Sols
1070
Gigabyte G1
Set Powerlimit 100%
Used Power 85 % of 200 Watt --> 170 Watt (85%)--> 1,51 Sol per Watt
257 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,82 Sol per Watt
255 Sols
Didnt test Ram OC
dude you can have 260 sol at 100 watt, don't waste electricity, tweak it right, 55% tdp is the key, then just oc mem and a bit the core
could u print screen your msi afterburner settings with tdp 55%? tks a lot!
does the cpu matters using 5 gpus?
no just use the cheap 1840 from intel
here
1080
Gigabyte G1
Set Powerlimit 100%
Used Power 75-90 % of 200 Watt --> 160 Watt (80%) --> 1,875 Sol per Watt
300 -310 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,893 Sol per Watt
265 Sols
1070
Gigabyte G1
Set Powerlimit 100%
Used Power 85 % of 200 Watt --> 170 Watt (85%)--> 1,51 Sol per Watt
257 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,82 Sol per Watt
255 Sols
Didnt test Ram OC
Gigabyte G1
Set Powerlimit 100%
Used Power 75-90 % of 200 Watt --> 160 Watt (80%) --> 1,875 Sol per Watt
300 -310 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,893 Sol per Watt
265 Sols
1070
Gigabyte G1
Set Powerlimit 100%
Used Power 85 % of 200 Watt --> 170 Watt (85%)--> 1,51 Sol per Watt
257 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,82 Sol per Watt
255 Sols
Didnt test Ram OC
dude you can have 260 sol at 100 watt, don't waste electricity, tweak it right, 55% tdp is the key, then just oc mem and a bit the core
could u print screen your msi afterburner settings with tdp 55%? tks a lot!
does the cpu matters using 5 gpus?
no just use the cheap 1840 from intel
here
In some of my early testing of the eqm 3a miner on two of my Gigabyte 2-fan 1070s (I don't member the exact model number), I saw just a hair shy of 300 sol/s per card with Afterburner set for -200 core, +500 memory, and TDP 60% - at 108 watts.
I'm sure further experimentation with the settings could do better, but I was aiming more for "best settings to achieve max sol/s" not "most efficient".
80% TDP, 0 core, +500 memory yields 330-345 sol/s depending on which card (I have a mix of at least 3 different Gigabyte models *INCLUDING* the "mini-ITX" model, and some EVGAs).
370 sol/s has been reported for that miner, but I suspect you have to have one of the "very good memory" 1070 models that can also manage 32+ MH/s on ETH (I've never seen more than 29 on any of my 1070s).
Real world performance targets to aim for - assuming Nicehash doesn't manage to come up with an even faster miner.
I'm sure further experimentation with the settings could do better, but I was aiming more for "best settings to achieve max sol/s" not "most efficient".
80% TDP, 0 core, +500 memory yields 330-345 sol/s depending on which card (I have a mix of at least 3 different Gigabyte models *INCLUDING* the "mini-ITX" model, and some EVGAs).
370 sol/s has been reported for that miner, but I suspect you have to have one of the "very good memory" 1070 models that can also manage 32+ MH/s on ETH (I've never seen more than 29 on any of my 1070s).
Real world performance targets to aim for - assuming Nicehash doesn't manage to come up with an even faster miner.
1080
Gigabyte G1
Set Powerlimit 100%
Used Power 75-90 % of 200 Watt --> 160 Watt (80%) --> 1,875 Sol per Watt
300 -310 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,893 Sol per Watt
265 Sols
1070
Gigabyte G1
Set Powerlimit 100%
Used Power 85 % of 200 Watt --> 170 Watt (85%)--> 1,51 Sol per Watt
257 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,82 Sol per Watt
255 Sols
Didnt test Ram OC
Gigabyte G1
Set Powerlimit 100%
Used Power 75-90 % of 200 Watt --> 160 Watt (80%) --> 1,875 Sol per Watt
300 -310 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,893 Sol per Watt
265 Sols
1070
Gigabyte G1
Set Powerlimit 100%
Used Power 85 % of 200 Watt --> 170 Watt (85%)--> 1,51 Sol per Watt
257 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,82 Sol per Watt
255 Sols
Didnt test Ram OC
dude you can have 260 sol at 100 watt, don't waste electricity, tweak it right, 55% tdp is the key, then just oc mem and a bit the core
could u print screen your msi afterburner settings with tdp 55%? tks a lot!
does the cpu matters using 5 gpus?
WOW!!! This miner rocks!! I´ve tried it with my notebooks simple NVidia Geforce 940MX
My hashrate has more than doubled from 13-15 H/s to 35 H/s! Not bad
My hashrate has more than doubled from 13-15 H/s to 35 H/s! Not bad
Petr, any chance of an updated miner which matches nicehash speeds? Are you still planning on enhancements?
Thanks Amph, i just updated it.
1080
Gigabyte G1
Set Powerlimit 100%
Used Power 75-90 % of 200 Watt --> 160 Watt (80%) --> 1,875 Sol per Watt
300 -310 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,893 Sol per Watt
265 Sols
1070
Gigabyte G1
Set Powerlimit 100%
Used Power 85 % of 200 Watt --> 170 Watt (85%)--> 1,51 Sol per Watt
257 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,82 Sol per Watt
255 Sols
Didnt test Ram OC
Gigabyte G1
Set Powerlimit 100%
Used Power 75-90 % of 200 Watt --> 160 Watt (80%) --> 1,875 Sol per Watt
300 -310 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,893 Sol per Watt
265 Sols
1070
Gigabyte G1
Set Powerlimit 100%
Used Power 85 % of 200 Watt --> 170 Watt (85%)--> 1,51 Sol per Watt
257 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,82 Sol per Watt
255 Sols
Didnt test Ram OC
dude you can have 260 sol at 100 watt, don't waste electricity, tweak it right, 55% tdp is the key, then just oc mem and a bit the core
1080
Gigabyte G1
Set Powerlimit 100%
Used Power 75-90 % of 200 Watt --> 160 Watt (80%) --> 1,875 Sol per Watt
300 -310 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,893 Sol per Watt
265 Sols
Set Powerlimit 55 % of 200 Watt --> 110 Watt (55%) --> 2,31 Sol per Watt
250 - 260 Sols (255 Sols) (Thanks to Amph)
Set Powerlimit 50 % of 200 Watt --> 100 Watt (50%) --> 2,55 Sol per Watt
255
1070
Gigabyte G1
Set Powerlimit 100%
Used Power 85 % of 200 Watt --> 170 Watt (85%)--> 1,51 Sol per Watt
257 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,82 Sol per Watt
255 Sols
Set Powerlimit 55 % of 200 Watt --> 110 Watt (55%) --> 2,13 Sol per Watt
235 Sols
Set Powerlimit 50 % of 200 Watt --> 100 Watt (50%) --> 2,30 Sol per Watt
230 Sols
Updated
Didnt test Ram OC
Gigabyte G1
Set Powerlimit 100%
Used Power 75-90 % of 200 Watt --> 160 Watt (80%) --> 1,875 Sol per Watt
300 -310 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,893 Sol per Watt
265 Sols
Set Powerlimit 55 % of 200 Watt --> 110 Watt (55%) --> 2,31 Sol per Watt
250 - 260 Sols (255 Sols) (Thanks to Amph)
Set Powerlimit 50 % of 200 Watt --> 100 Watt (50%) --> 2,55 Sol per Watt
255
1070
Gigabyte G1
Set Powerlimit 100%
Used Power 85 % of 200 Watt --> 170 Watt (85%)--> 1,51 Sol per Watt
257 Sols
Set Powerlimit 70 % of 200 Watt --> 140 Watt (70%) --> 1,82 Sol per Watt
255 Sols
Set Powerlimit 55 % of 200 Watt --> 110 Watt (55%) --> 2,13 Sol per Watt
235 Sols
Set Powerlimit 50 % of 200 Watt --> 100 Watt (50%) --> 2,30 Sol per Watt
230 Sols
Updated
Didnt test Ram OC
noobs miner flooding in every way, and good buyer catching all noobs dumper 
noobs miner flooding in every way, and good buyer catching all noobs dumper
Just tried nicehash fresh miner, 215 sol/s per 1060.
I wish we can have it here too
I wish we can have it here too
FYI, using the compute 2.0 version, my old Fermis:
stock GTX 590 converted to hydrocopper block
GPU1: 22-23 sol/s
GPU2: 22-23 sol/s
GTX 480 hydrocopper 26-28 sol/s
(all stock clocks)
stock GTX 590 converted to hydrocopper block
GPU1: 22-23 sol/s
GPU2: 22-23 sol/s
GTX 480 hydrocopper 26-28 sol/s
(all stock clocks)
Jump to: