EWBF's CUDA Zcash miner - page 54. | Bitcointalksearch.org

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: h0h0h0 on October 06, 2017, 11:18:51 PM

Card keeps overheating. Nvidia, linux CUDA. Help

just mining on the supernova pool.

Try setting the fans to something faster than the "factory stock" fan profile - which in all "good for mining" cards I've seen to date worries too much about "quiet" at the cost of "cool".

UnknownX

full member

Activity: 175

Merit: 100

Quote from: Real_Unhooked on October 06, 2017, 03:26:23 PM

Sorry if this was already answered but can you use this miner to mine Zero? I have a 1070 card. Thanks in advance!

You can't mine Zero with EWBF's cuda zcash miner.
You may try OptiminerZ/Zero:https://github.com/Optiminer/OptiminerZero

jpl

member

Activity: 154

Merit: 11

Quote from: z0n0 on September 06, 2017, 03:08:06 PM

Does anyone know why the system doesn't boot if I plus pcie riser into main x16 slot on motherboard?

BTW - I'm using P5Q PRO board: https://www.asus.com/Motherboards/P5Q_PRO/

Whenever I use the main x16 pcie slot (blue) the system won't boot.
Anyone knows how can I fix this ?

Someone posted this on another forum for Asus boards..
Could try enabling/disabling ‘above 4g encoding’ or setting all cards to pcie3.0x8?

h0h0h0

jr. member

Activity: 60

Merit: 6

Whole lotta $IRD

Card keeps overheating. Nvidia, linux CUDA. Help

just mining on the supernova pool.

MnngSprvsr

member

Activity: 118

Merit: 10

How much GPUs are max supported with Linux?

farmtester1

newbie

Activity: 54

Merit: 0

Quote from: papi92 on October 06, 2017, 10:17:14 AM

Quote from: farmtester1 on October 05, 2017, 07:43:59 PM

Quote from: papi92 on October 05, 2017, 03:28:10 AM

Quote from: farmtester1 on October 05, 2017, 12:25:01 AM

Quote from: raven1322 on October 04, 2017, 10:51:11 PM

Quote from: farmtester1 on October 04, 2017, 03:42:39 PM

Quote from: go6ooo1212 on October 04, 2017, 03:10:14 PM

Is there any info for further optimizations on the miner ?

Look for dstm's miner for active development and optimizations on zcash mining. EWBF is done.

Why do you think rent is done? Does dstm result to significantly higher sol/s?

dstm's miner handles GPU jobs individually and that opens room for more stability and optimization. Not to mention many things he's implementing that EWBF doesn't have.

It is only for linux. This is a flaw. Otherwise dstm has 2% fee. EWBF has an optional fee.

Windows will be out soon. EWBF fee option lowers the sol/s if you use it.

This is not true. Hash rate are the sam with and without fee.

nope, look the pool.

Real_Unhooked

hero member

Activity: 838

Merit: 500

Sorry if this was already answered but can you use this miner to mine Zero? I have a 1070 card. Thanks in advance!

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: zsugabubus007 on October 05, 2017, 01:48:54 PM

Quote from: Akaash on October 05, 2017, 12:45:07 AM

385.69
The latest available on the nVidia site

Try 823.33. That driver solved all of our nvidia rig problems like magic.

Official link: http://www.nvidia.com/download/driverResults.aspx/119399/en-us

382.33, for those that are Tyop impaired.

9-)

papi92

jr. member

Activity: 59

Merit: 1

Quote from: farmtester1 on October 05, 2017, 07:43:59 PM

Quote from: papi92 on October 05, 2017, 03:28:10 AM

Quote from: farmtester1 on October 05, 2017, 12:25:01 AM

Quote from: raven1322 on October 04, 2017, 10:51:11 PM

Quote from: farmtester1 on October 04, 2017, 03:42:39 PM

Quote from: go6ooo1212 on October 04, 2017, 03:10:14 PM

Is there any info for further optimizations on the miner ?

Look for dstm's miner for active development and optimizations on zcash mining. EWBF is done.

Why do you think rent is done? Does dstm result to significantly higher sol/s?

dstm's miner handles GPU jobs individually and that opens room for more stability and optimization. Not to mention many things he's implementing that EWBF doesn't have.

It is only for linux. This is a flaw. Otherwise dstm has 2% fee. EWBF has an optional fee.

Windows will be out soon. EWBF fee option lowers the sol/s if you use it.

This is not true. Hash rate are the sam with and without fee.

snsd555

newbie

Activity: 4

Merit: 0

Quote from: shibob on October 05, 2017, 12:02:44 PM

Quote from: Lumining on October 05, 2017, 11:29:43 AM

Quote from: snsd555 on October 05, 2017, 11:24:37 AM

Quote from: Lumining on October 05, 2017, 10:51:09 AM

Can someone tell me how to show the stats power usage and efficiency like it's shown in this screenshot (not from myself): https://i.imgur.com/sQ4riqL.png

If using bat file, add "--pec 1" to the bat file without the "".

Example: miner.exe --server zec-eu1.nanopool.org --user YOUR_WALLET_ADDRESS.YOUR_WORKER_NAME/YOUR_EMAIL --pass z --port 6666 --pec 1

If using config file, add line "pec 1" to the config file without the "".

Good luck!

I tried this but still no stats appear.
My batch file looks likw this now: miner --server stratum+tcp://zec-eu.suprnova.cc:2142 --MYNAME.WORKERNAME --pass x --port 2142 --pec1

--pec is enough, your configuration is wrong with --pec1, there's no space between pec 1. So try again with --pec

You're right, "pec 1" is for the config file. My bad.

repbaza

newbie

Activity: 43

Merit: 0

Russian version))
http://miningclub.info/threads/ewbfs-0-3-4b-russkaja-versija.19912/

farmtester1

newbie

Activity: 54

Merit: 0

Quote from: papi92 on October 05, 2017, 03:28:10 AM

Quote from: farmtester1 on October 05, 2017, 12:25:01 AM

Quote from: raven1322 on October 04, 2017, 10:51:11 PM

Quote from: farmtester1 on October 04, 2017, 03:42:39 PM

Quote from: go6ooo1212 on October 04, 2017, 03:10:14 PM

Is there any info for further optimizations on the miner ?

Look for dstm's miner for active development and optimizations on zcash mining. EWBF is done.

Why do you think rent is done? Does dstm result to significantly higher sol/s?

dstm's miner handles GPU jobs individually and that opens room for more stability and optimization. Not to mention many things he's implementing that EWBF doesn't have.

It is only for linux. This is a flaw. Otherwise dstm has 2% fee. EWBF has an optional fee.

Windows will be out soon. EWBF fee option lowers the sol/s if you use it.

zsugabubus007

newbie

Activity: 5

Merit: 0

Quote from: Akaash on October 05, 2017, 12:45:07 AM

385.69
The latest available on the nVidia site

Try 823.33. That driver solved all of our nvidia rig problems like magic.

Official link: http://www.nvidia.com/download/driverResults.aspx/119399/en-us

Lumining

full member

Activity: 322

Merit: 100

Okay I fixed it but still, no advanced stats appear, only the temps and speed.

EDIT: Problem fixed, many thanks for your help!

What settings do you use for overclocking a 1070? Is there a thread about it already?

shibob

full member

Activity: 672

Merit: 154

Blockchain Evangelist.

Quote from: Lumining on October 05, 2017, 11:29:43 AM

Quote from: snsd555 on October 05, 2017, 11:24:37 AM

Quote from: Lumining on October 05, 2017, 10:51:09 AM

Can someone tell me how to show the stats power usage and efficiency like it's shown in this screenshot (not from myself): https://i.imgur.com/sQ4riqL.png

If using bat file, add "--pec 1" to the bat file without the "".

Example: miner.exe --server zec-eu1.nanopool.org --user YOUR_WALLET_ADDRESS.YOUR_WORKER_NAME/YOUR_EMAIL --pass z --port 6666 --pec 1

If using config file, add line "pec 1" to the config file without the "".

Good luck!

I tried this but still no stats appear.
My batch file looks likw this now: miner --server stratum+tcp://zec-eu.suprnova.cc:2142 --MYNAME.WORKERNAME --pass x --port 2142 --pec1

--pec is enough, your configuration is wrong with --pec1, there's no space between pec 1. So try again with --pec

Lumining

full member

Activity: 322

Merit: 100

Quote from: snsd555 on October 05, 2017, 11:24:37 AM

Quote from: Lumining on October 05, 2017, 10:51:09 AM

Can someone tell me how to show the stats power usage and efficiency like it's shown in this screenshot (not from myself): https://i.imgur.com/sQ4riqL.png

If using bat file, add "--pec 1" to the bat file without the "".

Example: miner.exe --server zec-eu1.nanopool.org --user YOUR_WALLET_ADDRESS.YOUR_WORKER_NAME/YOUR_EMAIL --pass z --port 6666 --pec 1

If using config file, add line "pec 1" to the config file without the "".

Good luck!

I tried this but still no stats appear.
My batch file looks likw this now: miner --server stratum+tcp://zec-eu.suprnova.cc:2142 --MYNAME.WORKERNAME --pass x --port 2142 --pec1

Lumining

full member

Activity: 322

Merit: 100

Quote from: coinfoundry on October 05, 2017, 10:57:07 AM

Quote from: Lumining on October 05, 2017, 10:51:09 AM

Can someone tell me how to show the stats power usage and efficiency like it's shown in this screenshot (not from myself): https://i.imgur.com/sQ4riqL.png

Did you trying pressing "s"?

Nothing happens in the miner interface when I push a button on my keyboard.

snsd555

newbie

Activity: 4

Merit: 0

Quote from: Lumining on October 05, 2017, 10:51:09 AM

Can someone tell me how to show the stats power usage and efficiency like it's shown in this screenshot (not from myself): https://i.imgur.com/sQ4riqL.png

If using bat file, add "--pec" to the bat file without the "".

Example: miner.exe --server zec-eu1.nanopool.org --user YOUR_WALLET_ADDRESS.YOUR_WORKER_NAME/YOUR_EMAIL --pass z --port 6666 --pec

If using config file, add line "pec 1" to the config file without the "".

Good luck!

coinfoundry

full member

Activity: 292

Merit: 100

Miningcore

Quote from: Lumining on October 05, 2017, 10:51:09 AM

Can someone tell me how to show the stats power usage and efficiency like it's shown in this screenshot (not from myself): https://i.imgur.com/sQ4riqL.png

Did you trying pressing "s"?

Lumining

full member

Activity: 322

Merit: 100

Can someone tell me how to show the stats power usage and efficiency like it's shown in this screenshot (not from myself): https://i.imgur.com/sQ4riqL.png

Topic: EWBF's CUDA Zcash miner - page 54. (Read 2164338 times)