EWBF's CUDA Zcash miner - page 72. | Bitcointalksearch.org

Django69

newbie

Activity: 74

Merit: 0

Quote from: dioscures on September 01, 2017, 03:01:03 AM

I've issue with EWBF's CUDA Zcash miner Version 0.3.4b (Windows 10).
8 x GTX 1080 TI EWBF works fine, but with 9 GTX 1080 TI EWBF freeze during GPU detecting.
Anyone with the same problem?
An update will be planned to support more than 8 GPUs?

you have to switch to linux to have more than 8 nvidia gpus

hanskan

full member

Activity: 336

Merit: 100

Quote from: dioscures on September 01, 2017, 03:01:03 AM

I've issue with EWBF's CUDA Zcash miner Version 0.3.4b (Windows 10).
8 x GTX 1080 TI EWBF works fine, but with 9 GTX 1080 TI EWBF freeze during GPU detecting.
Anyone with the same problem?
An update will be planned to support more than 8 GPUs?

Windows does not support more than 8 Nvidia GPUs. You can have 8 nvidia and 8 AMD.
I have heard rumors that there will be a update to windows that allows to use more than 8 GPUs but i am not sure thats true.

dioscures

newbie

Activity: 3

Merit: 0

I've issue with EWBF's CUDA Zcash miner Version 0.3.4b (Windows 10).
8 x GTX 1080 TI EWBF works fine, but with 9 GTX 1080 TI EWBF freeze during GPU detecting.
Anyone with the same problem?
An update will be planned to support more than 8 GPUs?

dioscures

newbie

Activity: 3

Merit: 0

@tpd09

It's more hardware conf issue.
I had the same problem with my GTXs 1080 Ti. More OC + Power supply not powerful enough

tpd09

full member

Activity: 287

Merit: 100

has anyone faced the issue of GPU connection lost with EWBF 0.3.4B miner?

I am running 7 1080tis and always one of them get disconnected/lost. Is it a miner issue or GPU issue?

Vokas123

newbie

Activity: 73

Merit: 0

Quote from: Moscut on August 31, 2017, 04:36:26 PM

Quote from: Vokas123 on August 31, 2017, 04:21:35 PM

Quote from: Moscut on August 31, 2017, 04:08:54 PM

Hi, i am new to Ewbf with my 6x1080ti and 6x1070gtx

I got some questions and hope you can help me.

1) Payouts - how often are they?
2) Is there a way i can check the stats online what and how much i have mined?
3) and some paranoid question - How can i check if i entered my correct wallet adress? Cheesy

I typed: user t1SbF2kwe9GwW87bTNqKeLtpBJe96iMZA9V.Rig1 - .Rig1 is the name, right?

Thanks

This is a miner thread, however...

1) depending on the pool - what pool did you configure in config file? It could vary from 1 hour to 1 week or more
2) yes, again, depending on the pool
3) you will check that on web page of the pool you have configured in the conf file (some have "almost" live stats)

Thanks! I choose nanopool EU

You can find answers to your questions on FAQ page of nanopol.

1) Pool settings
•Fee is 1%
•Payouts several times a day
•No payout commission
•Default minimum payout is 0.01 ZEC
- To get to 0.1 Zec with 6 x 1080ti you will need about 30hours
•Share difficulty is static and equal to 19200.

You can mine directly to your ZCash wallet on any exchange

2) Enter your wallet address in the upper right side of the page and you will see if you are mining or not

3) see number 2

Moscut

newbie

Activity: 53

Merit: 0

Quote from: Vokas123 on August 31, 2017, 04:21:35 PM

Quote from: Moscut on August 31, 2017, 04:08:54 PM

Hi, i am new to Ewbf with my 6x1080ti and 6x1070gtx

I got some questions and hope you can help me.

1) Payouts - how often are they?
2) Is there a way i can check the stats online what and how much i have mined?
3) and some paranoid question - How can i check if i entered my correct wallet adress? Cheesy

I typed: user t1SbF2kwe9GwW87bTNqKeLtpBJe96iMZA9V.Rig1 - .Rig1 is the name, right?

Thanks

This is a miner thread, however...

1) depending on the pool - what pool did you configure in config file? It could vary from 1 hour to 1 week or more
2) yes, again, depending on the pool
3) you will check that on web page of the pool you have configured in the conf file (some have "almost" live stats)

Thanks! I choose nanopool EU

Vokas123

newbie

Activity: 73

Merit: 0

Quote from: Moscut on August 31, 2017, 04:08:54 PM

Hi, i am new to Ewbf with my 6x1080ti and 6x1070gtx

I got some questions and hope you can help me.

1) Payouts - how often are they?
2) Is there a way i can check the stats online what and how much i have mined?
3) and some paranoid question - How can i check if i entered my correct wallet adress? Cheesy

I typed: user t1SbF2kwe9GwW87bTNqKeLtpBJe96iMZA9V.Rig1 - .Rig1 is the name, right?

Thanks

This is a miner thread, however...

1) depending on the pool - what pool did you configure in config file? It could vary from 1 hour to 1 week or more
2) yes, again, depending on the pool
3) you will check that on web page of the pool you have configured in the conf file (some have "almost" live stats)

Moscut

newbie

Activity: 53

Merit: 0

Hi, i am new to Ewbf with my 6x1080ti and 6x1070gtx

I got some questions and hope you can help me.

1) Payouts - how often are they?
2) Is there a way i can check the stats online what and how much i have mined?
3) and some paranoid question - How can i check if i entered my correct wallet adress? Cheesy

I typed: user t1SbF2kwe9GwW87bTNqKeLtpBJe96iMZA9V.Rig1 - .Rig1 is the name, right?

Thanks

Heguli97

full member

Activity: 223

Merit: 101

Quote from: z0n0 on August 31, 2017, 12:41:47 AM

A bit off, sorry, but is this a good GPU deal for setting a rig?

https://www.bpm-power.com/it/product/1658348/scheda_video_nvidia_evga_gtx_1060_3gb_pci-e_dvi_hdmi_3xdp_03g-p4-6160-kr.html

I think that's OK, although i got some ASUS 1060 Duals for 209€ last week on sale in Finland

ap0stol

newbie

Activity: 39

Merit: 0

How do you think, my indicators of 1070 good or not?

1923 MHz at 0.900v
4437 MHz
PL 66%
power draw 138 W
Current temperature 59C (and 0% fan - fan stop, because this gpu placed in air-conditioned server room)

Average hashrate Share count Rejected count Rejected ratio
---------------- ----------- -------------- -------------
474,7147 2317 7 0,003

z0n0

legendary

Activity: 1274

Merit: 1006

A bit off, sorry, but is this a good GPU deal for setting a rig?

https://www.bpm-power.com/it/product/1658348/scheda_video_nvidia_evga_gtx_1060_3gb_pci-e_dvi_hdmi_3xdp_03g-p4-6160-kr.html

juville

newbie

Activity: 13

Merit: 0

Quote from: gs777 on August 30, 2017, 12:13:12 PM

Quote from: juville on August 30, 2017, 09:14:00 AM

Quote from: gs777 on August 30, 2017, 02:33:27 AM

Quote from: juville on August 29, 2017, 04:03:33 AM

Hi all,

I'm getting lots of rejected share on a particular gpu out of 7 gpu.
Is that normal?

edit: im using gtx1070

Do i have to do some settings with the intensity of the gpu? What is the usual setting to be set for intensity?

Is it a power sharing issue? the GPU doesn't have enough power?

Please help.

thankyou!

I used to have similar problem but after I reduced mc for about 10% it was fixed
my GTX1070 - pl130 cc150 mc350 temp limit 70C

Hi! thanks for your information!

Can i know your sols per gpu?

right now my settings are

pl - 68 cc175 mc 750 temp limit 80

Is my mc too high?

sure it's 430-440 sol/s
run on Ubuntu 16.04 nvOC v0019
and yours?

glad to sea you found a solution

Hi,

had some gpu error and right now my settings are
pl 75 cc 170 mc 600 temp limit 80

its running at 45x sols per gpu . great improvement!

thank you!

lasttimei

newbie

Activity: 20

Merit: 0

Will do thnx @ gs777 , farmtester1

ssdaytona

newbie

Activity: 20

Merit: 0

so, if you download EWBF's miner from the megaupload or google drive links, windows defender will throw up virus found and delete it.

if you download ewbf's miner from nanopool's GitHub repository, then there's no virus flag. be careful when you say all miner's have viruses and don't ignore it.

Quote from: S_Natural on August 30, 2017, 02:41:21 AM

Quote from: Lilu_Dallas on August 29, 2017, 11:44:11 PM

when I try downloading it windows defender blocks and deletes it, classifying it as "Trojan: Win32/Skeeyah.A! Bit"
seems to be a much more specific a Trojan alert than minergate threw up, is this file safe?

It's safe. Most of miner are detected as a virus/ trojan.
And we use EWBF's for long time, it's fine man

farmtester1

newbie

Activity: 54

Merit: 0

Quote from: lasttimei on August 30, 2017, 01:33:12 PM

Any Suggestion ?

So i got a 1080 Ti & a 980 Ti, 750-800 sol on the 1080ti,& 495-530 on the 980 ti.
I got a 1000w PSU , & i wanted to add another card. Thing is I got a small space to fit it & i don't want for it to over heat.
So should i just buy a pci extension?
Also what other gpu can reach 450+ sol? I don't want to go over 450$ on the gpu & extension.
I don't pay for electricity .

https://i.gyazo.com/51cf04171600908b5ebe1022007caea9.png
https://i.gyazo.com/c65790be846318e99886bef01e19934f.jpg

Also I'm sure this has been asked , But does --fee 0.0 really works?
Is this the best miner for zcash?

Soon enough there will be a better miner for windows, I forgot the name of the dev, you can find the thread somewhere around this forum. He's currently optimizing it for Linux and it's already as good as EWBF.

gs777

member

Activity: 118

Merit: 10

Quote from: lasttimei on August 30, 2017, 01:33:12 PM

Any Suggestion ?

So i got a 1080 Ti & a 980 Ti, 750-800 sol on the 1080ti,& 495-530 on the 980 ti.
I got a 1000w PSU , & i wanted to add another card. Thing is I got a small space to fit it & i don't want for it to over heat.
So should i just buy a pci extension?
Also what other gpu can reach 450+ sol? I don't want to go over 450$ on the gpu & extension.
I don't pay for electricity .

https://i.gyazo.com/51cf04171600908b5ebe1022007caea9.png
https://i.gyazo.com/c65790be846318e99886bef01e19934f.jpg

Also I'm sure this has been asked , But does --fee 0.0 really works?
Is this the best miner for zcash?

If you will use pcie risers GPU cooling definitely would be better
and as a bonus your hush rate slightly will go up as well
gtx 1080 make 520-550 sol/s

also you can try to set up fee to 0.01.
It works at least on nvOC

lasttimei

newbie

Activity: 20

Merit: 0

Any Suggestion ?

So i got a 1080 Ti & a 980 Ti, 750-800 sol on the 1080ti,& 495-530 on the 980 ti.
I got a 1000w PSU , & i wanted to add another card. Thing is I got a small space to fit it & i don't want for it to over heat.
So should i just buy a pci extension?
Also what other gpu can reach 450+ sol? I don't want to go over 450$ on the gpu & extension.
I don't pay for electricity .

https://i.gyazo.com/51cf04171600908b5ebe1022007caea9.png
https://i.gyazo.com/c65790be846318e99886bef01e19934f.jpg

Also I'm sure this has been asked , But does --fee 0.0 really works?
Is this the best miner for zcash?

gs777

member

Activity: 118

Merit: 10

Quote from: juville on August 30, 2017, 09:14:00 AM

Quote from: gs777 on August 30, 2017, 02:33:27 AM

Quote from: juville on August 29, 2017, 04:03:33 AM

Hi all,

I'm getting lots of rejected share on a particular gpu out of 7 gpu.
Is that normal?

edit: im using gtx1070

Do i have to do some settings with the intensity of the gpu? What is the usual setting to be set for intensity?

Is it a power sharing issue? the GPU doesn't have enough power?

Please help.

thankyou!

I used to have similar problem but after I reduced mc for about 10% it was fixed
my GTX1070 - pl130 cc150 mc350 temp limit 70C

Hi! thanks for your information!

Can i know your sols per gpu?

right now my settings are

pl - 68 cc175 mc 750 temp limit 80

Is my mc too high?

sure it's 430-440 sol/s
run on Ubuntu 16.04 nvOC v0019
and yours?

glad to sea you found a solution

lexele

full member

Activity: 190

Merit: 100

IMO LBRY/SKEIN/SIGT are better for 1080ti

Topic: EWBF's CUDA Zcash miner - page 72. (Read 2164327 times)