Bitcoin Forum>Alternate cryptocurrencies>Mining (Altcoins)
Pages:
Author

Topic: EWBF's CUDA Zcash miner - page 93. (Read 2164327 times)

Temporel
full member
Activity: 224
Merit: 100
Re: EWBF's CUDA Zcash miner
July 18, 2017, 11:58:20 AM
#3982
Quote from: sublimus on July 18, 2017, 11:32:16 AM
Quote from: Temporel on July 18, 2017, 10:58:21 AM
Quote from: nagobinga on July 18, 2017, 10:44:31 AM
0.0.3b is released Fixed tampa no errors and situations where a miner is very stop and will not do anything according to their wishes eachersion.


Link please Smiley

Link pour quoi?

Link for what?

0.0.3b is actually an old release ... You can obviously forget my question.
https://bitcointalksearch.org/topic/ewbfs-cuda-zcash-miner-1707546
sublimus
full member
Activity: 240
Merit: 100
Re: EWBF's CUDA Zcash miner
July 18, 2017, 11:32:16 AM
#3981
Quote from: Temporel on July 18, 2017, 10:58:21 AM
Quote from: nagobinga on July 18, 2017, 10:44:31 AM
0.0.3b is released Fixed tampa no errors and situations where a miner is very stop and will not do anything according to their wishes eachersion.


Link please Smiley

Link pour quoi?

Link for what?
Temporel
full member
Activity: 224
Merit: 100
Re: EWBF's CUDA Zcash miner
July 18, 2017, 10:58:21 AM
#3980
Quote from: nagobinga on July 18, 2017, 10:44:31 AM
0.0.3b is released Fixed tampa no errors and situations where a miner is very stop and will not do anything according to their wishes eachersion.


Link please Smiley
nagobinga
full member
Activity: 476
Merit: 100
Re: EWBF's CUDA Zcash miner
July 18, 2017, 10:44:31 AM
#3979
 0.0.3b is released Fixed tampa no errors and situations where a miner is very stop and will not do anything according to their wishes eachersion.
Temporel
full member
Activity: 224
Merit: 100
Re: EWBF's CUDA Zcash miner
July 18, 2017, 08:49:16 AM
#3978
Quote from: NvidiaMining on July 18, 2017, 08:10:42 AM
Quote from: Temporel on July 18, 2017, 07:56:58 AM
Quote from: tpd09 on July 18, 2017, 06:40:30 AM
Quote from: Temporel on July 18, 2017, 06:32:22 AM
Quote from: tpd09 on July 18, 2017, 06:00:04 AM
Quote from: Temporel on July 17, 2017, 02:16:30 PM
I just tried  again and I get 755 Sol/s without overclocking... so Im fine I guess

what power limit do you use?

I only use a temp limit, 70c but it doesnt even reach 66c anyway.

then I am doing something totally wrong

https://ibb.co/ep32LF
https://ibb.co/by0eZa

+-----+-------------+--------------+
| GPU | Power usage |  Efficiency  |
+-----+-------------+--------------+
|  0  |    186W     |  3.54 Sol/W  |
|  1  |    175W     |  3.60 Sol/W  |
|  2  |    175W     |  3.74 Sol/W  |
|  3  |    176W     |  3.51 Sol/W  |
|  4  |    190W     |  3.45 Sol/W  |
+-----+-------------+--------------+

dont link your temp to the power limit (the little red chain) with this miner.

Could you explain, please? I don't understand what you mean.

in afterburner, your temp setting is linked to the power limit, just click on the little red link (little red chain link) between the two settings (on the left side) and set your power limit to 100% and your temp limit to 70c. You could also push your memory by 100MHz for a start then add another 100MHz later if everything is fine.

Make sure you check your temp when using another miner with the link disabled.
Diod-ionica
newbie
Activity: 16
Merit: 0
Re: EWBF's CUDA Zcash miner
July 18, 2017, 08:36:37 AM
#3977

When to wait for a new release Huh
NvidiaMining
newbie
Activity: 26
Merit: 0
Re: EWBF's CUDA Zcash miner
July 18, 2017, 08:10:42 AM
#3976
Quote from: Temporel on July 18, 2017, 07:56:58 AM
Quote from: tpd09 on July 18, 2017, 06:40:30 AM
Quote from: Temporel on July 18, 2017, 06:32:22 AM
Quote from: tpd09 on July 18, 2017, 06:00:04 AM
Quote from: Temporel on July 17, 2017, 02:16:30 PM
I just tried  again and I get 755 Sol/s without overclocking... so Im fine I guess

what power limit do you use?

I only use a temp limit, 70c but it doesnt even reach 66c anyway.

then I am doing something totally wrong

https://ibb.co/ep32LF
https://ibb.co/by0eZa

+-----+-------------+--------------+
| GPU | Power usage |  Efficiency  |
+-----+-------------+--------------+
|  0  |    186W     |  3.54 Sol/W  |
|  1  |    175W     |  3.60 Sol/W  |
|  2  |    175W     |  3.74 Sol/W  |
|  3  |    176W     |  3.51 Sol/W  |
|  4  |    190W     |  3.45 Sol/W  |
+-----+-------------+--------------+

dont link your temp to the power limit (the little red chain) with this miner.

Could you explain, please? I don't understand what you mean.
Temporel
full member
Activity: 224
Merit: 100
Re: EWBF's CUDA Zcash miner
July 18, 2017, 07:56:58 AM
#3975
Quote from: tpd09 on July 18, 2017, 06:40:30 AM
Quote from: Temporel on July 18, 2017, 06:32:22 AM
Quote from: tpd09 on July 18, 2017, 06:00:04 AM
Quote from: Temporel on July 17, 2017, 02:16:30 PM
I just tried  again and I get 755 Sol/s without overclocking... so Im fine I guess

what power limit do you use?

I only use a temp limit, 70c but it doesnt even reach 66c anyway.

then I am doing something totally wrong

https://ibb.co/ep32LF
https://ibb.co/by0eZa

+-----+-------------+--------------+
| GPU | Power usage |  Efficiency  |
+-----+-------------+--------------+
|  0  |    186W     |  3.54 Sol/W  |
|  1  |    175W     |  3.60 Sol/W  |
|  2  |    175W     |  3.74 Sol/W  |
|  3  |    176W     |  3.51 Sol/W  |
|  4  |    190W     |  3.45 Sol/W  |
+-----+-------------+--------------+

dont link your temp to the power limit (the little red chain) with this miner.
wuuulf
newbie
Activity: 3
Merit: 0
Re: EWBF's CUDA Zcash miner
July 18, 2017, 07:49:21 AM
#3974
When I mine Zencash with the EWBF my rig runs without problems for days. As soon as I change to Zcash the mining will be canceled after a short time.

rig:
2x Gainward GTX 1070
PL 65% / chip -70 / RAM +200

https://i.gyazo.com/4304c66e33ce3898eb4d5d8d09d3d0c8.png

Can somebody help me with it?
NvidiaMining
newbie
Activity: 26
Merit: 0
Re: EWBF's CUDA Zcash miner
July 18, 2017, 07:35:27 AM
#3973
Quote from: tpd09 on July 18, 2017, 06:40:30 AM
Quote from: Temporel on July 18, 2017, 06:32:22 AM
Quote from: tpd09 on July 18, 2017, 06:00:04 AM
Quote from: Temporel on July 17, 2017, 02:16:30 PM
I just tried  again and I get 755 Sol/s without overclocking... so Im fine I guess

what power limit do you use?

I only use a temp limit, 70c but it doesnt even reach 66c anyway.

then I am doing something totally wrong

https://ibb.co/ep32LF
https://ibb.co/by0eZa

+-----+-------------+--------------+
| GPU | Power usage |  Efficiency  |
+-----+-------------+--------------+
|  0  |    186W     |  3.54 Sol/W  |
|  1  |    175W     |  3.60 Sol/W  |
|  2  |    175W     |  3.74 Sol/W  |
|  3  |    176W     |  3.51 Sol/W  |
|  4  |    190W     |  3.45 Sol/W  |
+-----+-------------+--------------+


Yes you are, clock those guys up  Cheesy
I have 3 Sea Hawks @ +175 Clock +590 Mem (unsure of the exact figures, cannot check right now unfortunately) and 75% power (sure). They pull 180-190W and get 690-730 Sol/s at a brisk 42-46 degrees  Wink

Efficiency is around 3.8, my energy is very expensive.

Good luck!
tpd09
full member
Activity: 287
Merit: 100
Re: EWBF's CUDA Zcash miner
July 18, 2017, 06:40:30 AM
#3972
Quote from: Temporel on July 18, 2017, 06:32:22 AM
Quote from: tpd09 on July 18, 2017, 06:00:04 AM
Quote from: Temporel on July 17, 2017, 02:16:30 PM
I just tried  again and I get 755 Sol/s without overclocking... so Im fine I guess

what power limit do you use?

I only use a temp limit, 70c but it doesnt even reach 66c anyway.

then I am doing something totally wrong

https://ibb.co/ep32LF
https://ibb.co/by0eZa

+-----+-------------+--------------+
| GPU | Power usage |  Efficiency  |
+-----+-------------+--------------+
|  0  |    186W     |  3.54 Sol/W  |
|  1  |    175W     |  3.60 Sol/W  |
|  2  |    175W     |  3.74 Sol/W  |
|  3  |    176W     |  3.51 Sol/W  |
|  4  |    190W     |  3.45 Sol/W  |
+-----+-------------+--------------+
Temporel
full member
Activity: 224
Merit: 100
Re: EWBF's CUDA Zcash miner
July 18, 2017, 06:32:22 AM
#3971
Quote from: tpd09 on July 18, 2017, 06:00:04 AM
Quote from: Temporel on July 17, 2017, 02:16:30 PM
I just tried  again and I get 755 Sol/s without overclocking... so Im fine I guess

what power limit do you use?

I only use a temp limit, 70c but it doesnt even reach 66c anyway.
tpd09
full member
Activity: 287
Merit: 100
Re: EWBF's CUDA Zcash miner
July 18, 2017, 06:00:04 AM
#3970
Quote from: Temporel on July 17, 2017, 02:16:30 PM
I just tried  again and I get 755 Sol/s without overclocking... so Im fine I guess

what power limit do you use?
polylogic
sr. member
Activity: 546
Merit: 254
ʕʘ̅͜ʘ̅ʔ
Re: EWBF's CUDA Zcash miner
July 18, 2017, 05:39:33 AM
#3969
yeah telegram monitor would be nice Cheesy
Kukushka
newbie
Activity: 18
Merit: 0
Re: EWBF's CUDA Zcash miner
July 18, 2017, 04:38:13 AM
#3968
EWBF, can u add some Telegram bot monitoring?  Roll Eyes
Kukushka
newbie
Activity: 18
Merit: 0
Re: EWBF's CUDA Zcash miner
July 18, 2017, 04:24:44 AM
#3967
Quote from: mettalmag on July 17, 2017, 03:21:06 PM
one more question if you guys could help me out,
here's the config I'm running:
Code:
:restart
TIMEOUT 8
miner --server zec-eu1.dwarfpool.com --port 3336 --user ** --pass **@gmail.com --eexit 3 --api *.*.*.* --log 2 --logfile ZCASH.%date:~6,4%%date:~3,2%%date:~0,2%.ewbf.log --pec
goto :restart


I think this config gives me ability to save the the log file, but either I'm unable to find it or I did something wrong in config, any ideas what can I do?

try use absolute path e.g.  --logfile C:\mining\zec\logs\ZCASH.%date:~6,4%%date:~3,2%%date:~0,2%.ewbf.log

also this miner can not use variables logfile name in config file, only in .bat
mez
full member
Activity: 197
Merit: 100
Re: EWBF's CUDA Zcash miner
July 17, 2017, 06:56:30 PM
#3966
Quote from: EWBF_ on July 06, 2017, 03:37:15 PM
Quote from: nUm81 on July 05, 2017, 01:52:19 AM
Quote from: EWBF_ on June 24, 2017, 04:56:24 PM
Quote from: nUm81 on June 22, 2017, 07:33:08 PM
Quote from: EWBF_ on June 11, 2017, 02:00:08 PM
Version 0.3.4b released.
Many new features on the way.
Web page screenshot: https://s4.postimg.org/opjzemkwt/Screenshot_20170611_220048.png

EWBF, in your next release can you please include timestamps in the log files? 

Ok, it will be a local date.

EWBF, 

Can you also look at making the miner re-check for connection to the primary pool at a time interval if it does divert to a secondary pool?   Right now if the primary pool goes down, it will mine on the alternate pool until the miners is restarted, even if the primary pool comes back on line.

It can by a bit tricky, but i will think about this.


manual reset of pools is good enough =)
QuintLeo
legendary
Activity: 1498
Merit: 1030
Re: EWBF's CUDA Zcash miner
July 17, 2017, 06:30:26 PM
#3965
Quote from: YIz on July 17, 2017, 12:54:20 PM
Should I expect more than 700Sol/s on a 1080Ti?

 Depends on the specific 1080 ti model (some clock higher than others), and also on your settings especially TDP, but generally yes.

Cortez7575
member
Activity: 67
Merit: 10
Re: EWBF's CUDA Zcash miner
July 17, 2017, 03:26:48 PM
#3964
I have an asus strix 1080 ti...740-760Sol/s. Basic settings.
mettalmag
legendary
Activity: 1084
Merit: 1003
≡v≡
Re: EWBF's CUDA Zcash miner
July 17, 2017, 03:21:06 PM
#3963
one more question if you guys could help me out,
here's the config I'm running:
Code:
:restart
TIMEOUT 8
miner --server zec-eu1.dwarfpool.com --port 3336 --user ** --pass **@gmail.com --eexit 3 --api *.*.*.* --log 2 --logfile ZCASH.%date:~6,4%%date:~3,2%%date:~0,2%.ewbf.log --pec
goto :restart


I think this config gives me ability to save the the log file, but either I'm unable to find it or I did something wrong in config, any ideas what can I do?
Pages:
Bitcoin Forum>Alternate cryptocurrencies>Mining (Altcoins)
Jump to: