Feathercoin [FTC] - page 185. | Bitcointalksearch.org

jdebunt

legendary

Activity: 1596

Merit: 1010

Quote from: paul21 on April 17, 2013, 01:59:50 PM

I'll close it until I can get the stale rate down, thanks for testing it.

I sent some payments out manually from my wallet to the addresses I saw on there.

much appreciated

paul21

member

Activity: 70

Merit: 10

I'll close it until I can get the stale rate down, thanks for testing it.

I sent some payments out manually from my wallet to the addresses I saw on there.

Transisto

donator

Activity: 1731

Merit: 1008

Quote from: c4n10 on April 17, 2013, 01:25:15 PM

Quote from: wmikrut on April 17, 2013, 01:22:27 PM

Quote from: Transisto on April 17, 2013, 01:13:57 PM

How can you claim there was no pre-mine when you haven't announced your coin before starting it ?

And no, announcing it 5 min before launch does not count.

Why not?
I was in the forum at the right time.
when i started there was like 300 blocks.

Nobody told me... i was paying attention.

I think his point is that it's not fair to those of us who aren't available to stalk the forums all day long. A true "no pre-mine" is when a coin is announced days, weeks or months in advance (not minutes in advance) so everyone has a TRUE equal opportunity at being an "early adopter".

I'm not complaining since I could care less about his "nothing new / me too coin" ... but, You must usually allow a week or more to allow people to review the code or understand the concept.

In this case it was needed to start it fast because there was really nothing worthy to spend time understanding.

Here is an example of a coin that was released with no pre-mine.

Quote

That's 9 days of notice to the public before release, with precise release schedule, and announced right here on the most populated cryptocurrency forum

https://bitcointalksearch.org/topic/m.1847081

jdebunt

legendary

Activity: 1596

Merit: 1010

Quote from: imafish2002 on April 17, 2013, 01:58:35 PM

Got a "Found block for pool 1!" note in cgminer just before it stopped responding followed by a prompt incoming transaction!

same here, got 10 FC

jmfg187

member

Activity: 84

Merit: 10

Thanks for the effort at any rate, as soon as you have it up again I will reconnect.

imafish2002

full member

Activity: 168

Merit: 100

Got a "Found block for pool 1!" note in cgminer just before it stopped responding followed by a prompt incoming transaction!

biternana

newbie

Activity: 51

Merit: 0

Quote from: paul21 on April 17, 2013, 01:12:54 PM

I did a poor job of modifying p2pool but it seems to work, I got a block to pay out to my address anyway.

cgminer --scrypt -o stratum+tcp://fpool1.zapto.org:19327 -s 1 --expiry 1 --queue 0 -u PUT_YOUR_FC_ADDR_HERE -p x (and other tuning stuff)

No GUI but you can go here http://fpool1.zapto.org:19327/static/ and on the bottom make sure your address shows up for a payout after you earn some shares. If you have a payout and you notice a new block is found (in the table) and you didn't get paid, then let me know / disconnect. I haven't tested it out enough yet.

The stale rate is too high Sad

jdebunt

legendary

Activity: 1596

Merit: 1010

got it work with cudaminer aswell with the following settings :

cudaminer.exe -o fpool1.zapto.org:19327 -u -p x , however 50% are rejected, so perhaps not the best option

paul21

member

Activity: 70

Merit: 10

Quote from: jmfg187 on April 17, 2013, 01:48:53 PM

Shouldn't we have one by now? I usually find one in this amount of time solo.

Probably, but it's seeing 50% DOA so the pool's net rate is a block every 15 minutes. If nothing pays in the next 10 I'll close it for troubleshooting and send some payments to the shares I see.

jmfg187

member

Activity: 84

Merit: 10

Shouldn't we have one by now? I usually find one in this amount of time solo.

jdebunt

legendary

Activity: 1596

Merit: 1010

Quote from: paul21 on April 17, 2013, 01:12:54 PM

I did a poor job of modifying p2pool but it seems to work, I got a block to pay out to my address anyway.

cgminer --scrypt -o stratum+tcp://fpool1.zapto.org:19327 -s 1 --expiry 1 --queue 0 -u PUT_YOUR_FC_ADDR_HERE -p x (and other tuning stuff)

No GUI but you can go here http://fpool1.zapto.org:19327/static/ and on the bottom make sure your address shows up for a payout after you earn some shares. If you have a payout and you notice a new block is found (in the table) and you didn't get paid, then let me know / disconnect. I haven't tested it out enough yet.

thanks for the pool

intensity 11 or higher gives me rejected shares so i'm seeing which intensity actually works atm

alex_fun

full member

Activity: 196

Merit: 100

I was happy when this coin launched I had chance to see how quickly I can put all stuff together etc and see where are knowledge holes are

Anyone can post detailed how to compile cpooler cpu miner? I want to experiment with some prototype coins hence the request

Also I am happy to provide server with fat internet pipe in usa datacentre for the pool for this coin for say 1,2 day, in exchange for chance to understand how pools work Wink

I am going to exercise if someone wants me to setup up pool server with putty access let me know

Ok I saw someone launched pool already lol

jmfg187

member

Activity: 84

Merit: 10

Quote from: paul21 on April 17, 2013, 01:26:03 PM

Quote from: paul21 on April 17, 2013, 01:12:54 PM

I did a poor job of modifying p2pool but it seems to work, I got a block to pay out to my address anyway.

cgminer --scrypt -o stratum+tcp://fpool1.zapto.org:19327 -s 1 --expiry 1 --queue 0 -u PUT_YOUR_FC_ADDR_HERE -p x (and other tuning stuff)

No GUI but you can go here http://fpool1.zapto.org:19327/static/ and on the bottom make sure your address shows up for a payout after you earn some shares. If you have a payout and you notice a new block is found (in the table) and you didn't get paid, then let me know / disconnect. I haven't tested it out enough yet.

Just got a payout, did your wallets see any action?

Let me know when you get another one, I just pointed my 1500 Kh/s at it like 5 minutes ago, nothing yet.

c4n10

sr. member

Activity: 294

Merit: 250

Quote from: wmikrut on April 17, 2013, 01:32:55 PM

There will be more coins...

I guess it would be helpful if there was a topic labeled:
"Launching a new coin? New coin guidelines to follow"

Maybe in the newbies section...

I think it's generally assumed that if you are forking your own coin you have most likely been around long enough to see enough complaints about coins which are mined with little to no announcement in advance and should theoretically know and comprehend the true definition of the phrase "no pre-mine".

wmikrut

hero member

Activity: 631

Merit: 501

There will be more coins...

I guess it would be helpful if there was a topic labeled:
"Launching a new coin? New coin guidelines to follow"

wmikrut

hero member

Activity: 631

Merit: 501

Quote from: c4n10 on April 17, 2013, 01:25:15 PM

Quote from: wmikrut on April 17, 2013, 01:22:27 PM

Quote from: Transisto on April 17, 2013, 01:13:57 PM

How can you claim there was no pre-mine when you haven't announced your coin before starting it ?

And no, announcing it 5 min before launch does not count.

Why not?
I was in the forum at the right time.
when i started there was like 300 blocks.

Nobody told me... i was paying attention.

I think his point is that it's not fair to those of us who aren't available to stalk the forums all day long. A true "no pre-mine" is when a coin is announced, days, weeks or months in advance (not minutes in advance) so everyone has a TRUE equal opportunity at being an "early adopter".

Point taken.

paul21

member

Activity: 70

Merit: 10

Quote from: paul21 on April 17, 2013, 01:12:54 PM

I did a poor job of modifying p2pool but it seems to work, I got a block to pay out to my address anyway.

cgminer --scrypt -o stratum+tcp://fpool1.zapto.org:19327 -s 1 --expiry 1 --queue 0 -u PUT_YOUR_FC_ADDR_HERE -p x (and other tuning stuff)

No GUI but you can go here http://fpool1.zapto.org:19327/static/ and on the bottom make sure your address shows up for a payout after you earn some shares. If you have a payout and you notice a new block is found (in the table) and you didn't get paid, then let me know / disconnect. I haven't tested it out enough yet.

Just got a payout, did your wallets see any action?

c4n10

sr. member

Activity: 294

Merit: 250

Quote from: wmikrut on April 17, 2013, 01:22:27 PM

Quote from: Transisto on April 17, 2013, 01:13:57 PM

How can you claim there was no pre-mine when you haven't announced your coin before starting it ?

And no, announcing it 5 min before launch does not count.

Why not?
I was in the forum at the right time.
when i started there was like 300 blocks.

Nobody told me... i was paying attention.

I think his point is that it's not fair to those of us who aren't available to stalk the forums all day long. A true "no pre-mine" is when a coin is announced days, weeks or months in advance (not minutes in advance) so everyone has a TRUE equal opportunity at being an "early adopter".

wmikrut

hero member

Activity: 631

Merit: 501

Quote from: Transisto on April 17, 2013, 01:13:57 PM

How can you claim there was no pre-mine when you haven't announced your coin before starting it ?

And no, announcing it 5 min before launch does not count.

Why not?
I was in the forum at the right time.
when i started there was like 300 blocks.

Nobody told me... i was paying attention.

Transisto

donator

Activity: 1731

Merit: 1008

How can you claim there was no pre-mine when you haven't announced your coin before starting it ?

And no, announcing it 5 min before launch does not count.

Topic: Feathercoin [FTC] - page 185. (Read 460641 times)