Feathercoin [FTC] - page 182. | Bitcointalksearch.org

Limie

member

Activity: 70

Merit: 10

Quote from: jmfg187 on April 17, 2013, 03:03:21 PM

Quote from: mebezac on April 17, 2013, 02:57:55 PM

For some reason I can't the wallet to connect, I tried redownloading it, opening and closing it a few times like was said to do below, still no luck.

Quote from: jmfg187 on April 17, 2013, 02:38:59 PM

Quote from: milly6 on April 17, 2013, 02:37:48 PM

I cannot get connections on the Feathercoin client..

Mine did that once I just had to restart the client a couple times.

If on windows go to appdata roaming feathercoin and make a feathercoin.conf with this in it and restart your client if your on linux then hopefully you know where to put the feathercoin.conf.

Code:

rpcuser=user
rpcpassword=password
server=1
daemon=1
rpcport=8100
rpcport=8101

Also make sure port 9336 is open on your firewall or router.

I have tried all of this but still cannot seem to get a connection.

Code:

Feathercoin version v0.6.3.0-g3aaa7ba-beta ($Format:%cD)
Startup time: 04/17/13 22:48:48
Default data directory C:\Users\Saranac\AppData\Roaming\Feathercoin
Used data directory a:\Feathercoin\data
Bound to [::]:9336
Bound to 0.0.0.0:9336
Loading block index...
dbenv.open LogDir=a:\Feathercoin\data\database ErrorFile=a:\Feathercoin\data\db.log
LoadBlockIndex(): hashBestChain=12a765e31ffd4059bada height=0 date=10/07/11 07:31:05
Verifying last 0 blocks at level 1
block index 76ms
Loading wallet...
nFileVersion = 60300
wallet 627ms
Loading addresses...
Loaded 4 addresses from peers.dat 0ms
RandAddSeed() 216036 bytes
mapBlockIndex.size() = 1
nBestHeight = 0
setKeyPool.size() = 100
mapWallet.size() = 0
mapAddressBook.size() = 1
Done loading
ThreadRPCServer started
refreshWallet
send version message: version 60001, blocks=0, us=0.0.0.0:0, them=0.0.0.0:0, peer=127.0.0.1:0
AddLocal([2001:0:9d38:6ab8:2c7d:2e5d:4766:f795]:9336,1)
ThreadMapPort started
ThreadSocketHandler started
ThreadOpenConnections started
ThreadIRCSeed started
ThreadOpenAddedConnections started
ThreadOpenAddedConnections exited
ThreadMessageHandler started
Flushed 4 addresses to peers.dat 48ms
ipcThread started
GetMyExternalIP() received [184.153.8.106] 184.153.8.106:0
GetMyExternalIP() returned 184.153.8.106
AddLocal(184.153.8.106:9336,5)
UPnP: ExternalIPAddress = 184.153.8.106
AddLocal(184.153.8.106:9336,3)
UPnP Port Mapping successful.
connect() failed: 10049
IRC :pelican.heliacal.net NOTICE AUTH :*** Looking up your hostname...
IRC :pelican.heliacal.net NOTICE AUTH :*** Found your hostname
IRC SENDING: NICK uBNXB7LrbLuJSKd

IRC SENDING: USER uBNXB7LrbLuJSKd 8 * : uBNXB7LrbLuJSKd

IRC :pelican.heliacal.net 001 uBNXB7LrbLuJSKd :Welcome to the LFNet Internet Relay Chat Network uBNXB7LrbLuJSKd
IRC :pelican.heliacal.net 002 uBNXB7LrbLuJSKd :Your host is pelican.heliacal.net[173.246.103.92/6667], running version hybrid-7.2.3
IRC :pelican.heliacal.net 003 uBNXB7LrbLuJSKd :This server was created Jun 28 2011 at 14:26:11
IRC :pelican.heliacal.net 004 uBNXB7LrbLuJSKd pelican.heliacal.net hybrid-7.2.3 CDGabcdfgiklnorsuwxyz biklmnopstveI bkloveI
IRC SENDING: USERHOST uBNXB7LrbLuJSKd

IRC :pelican.heliacal.net 302 uBNXB7LrbLuJSKd :[email protected]
GetIPFromIRC() got userhost 173.246.103.92
GetIPFromIRC() returned 173.246.103.92
AddLocal(173.246.103.92:9336,4)
IRC SENDING: NICK uBNXB7LrbLuJSKd

IRC SENDING: JOIN #feathercoin00

IRC SENDING: WHO #feathercoin00

trying connection 113.203.253.46:9336 lastseen=247.8hrs
connection timeout
recv failed: 10060
IRC waiting 71 seconds to reconnect
trying connection 73.113.167.173:9336 lastseen=235.4hrs
connection timeout
trying connection 113.203.253.46:9336 lastseen=247.8hrs
connection timeout
trying connection 113.203.253.46:9336 lastseen=247.8hrs
connection timeout
trying connection 73.113.167.173:9336 lastseen=235.5hrs
connection timeout
trying connection 113.203.253.46:9336 lastseen=247.8hrs

CaptChadd

hero member

Activity: 924

Merit: 1005

Product Marketing & Promotion / Software Developer

More coins means 1 of 2 things.

1) Survival of the fittest, each new coin has to improve on the previous or be different somehow or there is not point, this a a very good thing, proven by nature.
2) Alt-coins in general become so bloated that it becomes a joke.

meebs

hero member

Activity: 616

Merit: 500

Quote from: testerx on April 17, 2013, 05:22:46 PM

Even with the much higher difficulty now I have mostly rejects....what's wrong with this? I'm not even sure why everyone is piling onto this coin anyway.

in cgminer use the "--expire 5" setting, this forces the miner to get new information from the client far more often.. 5 seconds vs 60 or so by default.

Limie

member

Activity: 70

Merit: 10

can anyone tell me what the command is to change the appdata dir for feathercoin?

alex_fun

full member

Activity: 196

Merit: 100

Yep is fun lol come to feathercoin on freenode to chat I am currenty working on making stratum work with pooler miner

Also do you still advice to use get new work block every 1 sec setting?

termhn

full member

Activity: 126

Merit: 100

Quote from: testerx on April 17, 2013, 05:22:46 PM

Even with the much higher difficulty now I have mostly rejects....what's wrong with this? I'm not even sure why everyone is piling onto this coin anyway.

Because it's fun Cheesy

niteryder

full member

Activity: 196

Merit: 100

Quote from: testerx on April 17, 2013, 05:22:46 PM

Even with the much higher difficulty now I have mostly rejects....what's wrong with this? I'm not even sure why everyone is piling onto this coin anyway.

crypto bandwagon

testerx

hero member

Activity: 608

Merit: 500

Even with the much higher difficulty now I have mostly rejects....what's wrong with this? I'm not even sure why everyone is piling onto this coin anyway.

dreamwatcher

legendary

Activity: 1064

Merit: 1000

Quote from: niteryder on April 17, 2013, 05:09:25 PM

I love how the feathercoin wallet says the difficulty is 1, but cgminer says 65k. Geez, this coin should be worth .50 usd already at that rate.

From the cgminer FAQ:

Code:

Q: Why do the scrypt diffs not match with the current difficulty target?
A: The current scrypt block difficulty is expressed in terms of how many
multiples of the BTC difficulty it currently is (eg 28) whereas the shares of
"difficulty 1" are actually 65536 times smaller than the BTC ones. The diff
expressed by cgminer is as multiples of difficulty 1 shares.

c4n10

sr. member

Activity: 294

Merit: 250

Quote from: niteryder on April 17, 2013, 05:09:25 PM

I love how the feathercoin wallet says the difficulty is 1, but cgminer says 65k. Geez, this coin should be worth .50 usd already at that rate.

LOL, it is scrypt difficulty of 1 which displays as 65k in cgminer, it is working the way it should. Litecoin does the same.

milly6

legendary

Activity: 1632

Merit: 1010

Quote from: chriswen on April 17, 2013, 05:10:19 PM

Wow! My scryptminer gui seems to be getting a much better hashrate. The integrated CPU miner must be crap.

i think that is usually true with the client miner

chriswen

hero member

Activity: 756

Merit: 500

Wow! My scryptminer gui seems to be getting a much better hashrate. The integrated CPU miner must be crap.

niteryder

full member

Activity: 196

Merit: 100

I love how the feathercoin wallet says the difficulty is 1, but cgminer says 65k. Geez, this coin should be worth .50 usd already at that rate.

nesic1

hero member

Activity: 636

Merit: 500

Quote from: blastbob on April 17, 2013, 04:52:59 PM

Quote from: milly6 on April 17, 2013, 04:26:25 PM

Quote from: BulletCoin on April 17, 2013, 04:05:50 PM

Joined the pool with ~200Kh/s desktop background humming

FC account: 6hcayowvVpo7XKWLDXbrDoRkFjNS7tMBYU

The pool is working? Im confused, can you post the link?

Pool is working great

cgminer --scrypt -o stratum+tcp://fpool1.zapto.org:19327 -u YourFCAddress -p x -s 1 --expiry 1 --queue 0 --expiry 1 -I 13

Stats you can check out here http://fpool1.zapto.org:19327/static/

Hopefully siteowner will share his p2pool mod with the rest of us

will try it now, someone using it with guiminer scrypt? cgminer doesnt work well with my cards?

http://fpool1.zapto.org:19327/static/ it says litecoin?

thep33t

full member

Activity: 126

Merit: 100

Quote from: Gamesfreak13563 on April 17, 2013, 04:55:10 PM

There needs to be a pool that's not P2Pool.

Also, what's the going rate for BTC/FC and LTC/FC?

if you know how to set up a different pool I am all ears.

c4n10

sr. member

Activity: 294

Merit: 250

Quote from: milly6 on April 17, 2013, 04:59:46 PM

I am currently testing the mine with pooler's cpuminer
heres my batch:
minerd --url http://fpool1.zapto.org:19327 --userpass [feathercoin address]:x

Any tweak suggestions? It is connected and mining, supposedly.

If you have more than 1 cpu core use "--threads" and set to the number of cores you have. For example, I have 2 core so I use "--threads 2"

milly6

legendary

Activity: 1632

Merit: 1010

I am currently testing the mine with pooler's cpuminer
heres my batch:
minerd --url http://fpool1.zapto.org:19327 --userpass [feathercoin address]:x

Any tweak suggestions? It is connected and mining, supposedly.

Gamesfreak13563

full member

Activity: 126

Merit: 100

Quote from: milly6 on April 17, 2013, 04:56:32 PM

how do I format that stratum command for poolers' cpu miner?

I have CGMiner downloaded, what do I copy to access the pool?

Or better yet is there a way to just do it in GUIMiner Scrypt?

c4n10

sr. member

Activity: 294

Merit: 250

Quote from: milly6 on April 17, 2013, 04:56:32 PM

how do I format that stratum command for poolers' cpu miner?

-o stratum+tcp://url:stratumport

EDIT: Sorry, that is for cgminer. cpuminer does not have stratum support (to my knowledge)

milly6

legendary

Activity: 1632

Merit: 1010

how do I format that stratum command for poolers' cpu miner?

Topic: Feathercoin [FTC] - page 182. (Read 460641 times)