👉 Fixed the work of the order book on the margin market
👉 Improved the work of reverse on TradingView signals
📺 TradingView signals video
🔥You can already trade through the terminal
Topic: Finandy - Free trading terminal for Binance - page 12. (Read 3542 times)
📣 code #update.
👉 Fixed the work of the order book on the margin market
👉 Improved the work of reverse on TradingView signals
📺 TradingView signals video
🔥You can already trade through the terminal
👉 Fixed the work of the order book on the margin market
👉 Improved the work of reverse on TradingView signals
📺 TradingView signals video
🔥You can already trade through the terminal
📣 code #update
👉 Added the ability to stop trading in the terminal in the API keys section
👉 Added the ability to stop trading in the terminal in the API keys section
📣 code #update
👉 Fixed reverse behavior when creating an order based on a signal from TradingView
👉 Fixed reverse behavior when creating an order based on a signal from TradingView
About FIN token and smart contract parameters. How to buy FIN. Finandy exchange. Transaction mining.
📣 code #update
👉 Increased the session time to 7 days. Now, if you ask the site at least once a week, you will not need to log in.
👉 Corrected the work of loan repayment and the calculation of the balance when the SL module is operating on a cross margin
👉 Added icons for new currency pairs
👉 Increased the session time to 7 days. Now, if you ask the site at least once a week, you will not need to log in.
👉 Corrected the work of loan repayment and the calculation of the balance when the SL module is operating on a cross margin
👉 Added icons for new currency pairs
How to Trade Binance Isolated Margin. Auto loan and auto return every hour. Position on the chart.
📣 code #update
Updating in the order book was done 2 times faster. If you need it even faster - write about it.
Slightly improved the synchronization of futures positions
How add Stop Loss to a position.
📣 code #update
👉 Added display Funding information above the chart on the futures market.
👉 Added display High / Low price for the last 24 hours above the chart.
👉 Added selection of exchanges, while Binance is available, but in December we will add Finandy to the list
👉 Corrected the calculation of balances on cross margin
👉 Added display Funding information above the chart on the futures market.
👉 Added display High / Low price for the last 24 hours above the chart.
👉 Added selection of exchanges, while Binance is available, but in December we will add Finandy to the list
👉 Corrected the calculation of balances on cross margin
📣 code #update
🔥 Added the ability to trade on the Isolated Margin Market!
The maximum possible loan amount is approximately, therefore, when creating an order for 100% of the balance, it may refuse, please take this into account. We are trying to get the exact formula for calculating, but have not yet received a definite answer.
Try to trade on minimum orders, as the market is new, there may be errors in the work.
📒 Instructions (https://docs.finandy.com/trading-terminal/guide/isolated-margin-binance) on how to start trading on isolated margin
👉 Added a filter to the cross and isolated margin in the tickers of currency pairs. Now in the selected market only those pairs are displayed in which a position can be created.
👉 Blocked the ability to create an order if the market is not available for this pair.
🔥 Added the ability to trade on the Isolated Margin Market!
The maximum possible loan amount is approximately, therefore, when creating an order for 100% of the balance, it may refuse, please take this into account. We are trying to get the exact formula for calculating, but have not yet received a definite answer.
Try to trade on minimum orders, as the market is new, there may be errors in the work.
📒 Instructions (https://docs.finandy.com/trading-terminal/guide/isolated-margin-binance) on how to start trading on isolated margin
👉 Added a filter to the cross and isolated margin in the tickers of currency pairs. Now in the selected market only those pairs are displayed in which a position can be created.
👉 Blocked the ability to create an order if the market is not available for this pair.
How to use Binance Futures Hedge Mode. An example of a profitable hedging strategy.
👉 Added a default Trailing order for Futures from the Binance exchange.
The Deviation field sets the % distance from the trend to the trigger price.
Tracking the trend is activated upon reaching the trigger Price specified in the order form.
👉 Made an automatic change of the order type, from limit to Stop order, if the limit is executed at the market.
It is activated when you move an order on the chart or enter a price in the form of an order from the keyboard.
Those who enter the breakout will find it even more convenient to work with the panel 😊
👉 When opening a position on Futures not from TradingPanel, correct definition of the position margin type: Isolated or Cross
👉 When switching between the types of orders Limit, Stop order, Trailing order, the price is not reset. Moreover, for Stop orders and for Trading, this is the price of the trigger.
👉 Added selection of an open pair in the list of stickers
👉 Trading View has recognized a bug of missing lines on the chart, they will have a new version soon, they should fix it
👉 Improved synchronization of positions in Futures when starting an account
👉 Correction of minor bugs in the panel
❗ There were a lot of changes, please write if you notice an incorrect operation of the system
The Deviation field sets the % distance from the trend to the trigger price.
Tracking the trend is activated upon reaching the trigger Price specified in the order form.
👉 Made an automatic change of the order type, from limit to Stop order, if the limit is executed at the market.
It is activated when you move an order on the chart or enter a price in the form of an order from the keyboard.
Those who enter the breakout will find it even more convenient to work with the panel 😊
👉 When opening a position on Futures not from TradingPanel, correct definition of the position margin type: Isolated or Cross
👉 When switching between the types of orders Limit, Stop order, Trailing order, the price is not reset. Moreover, for Stop orders and for Trading, this is the price of the trigger.
👉 Added selection of an open pair in the list of stickers
👉 Trading View has recognized a bug of missing lines on the chart, they will have a new version soon, they should fix it
👉 Improved synchronization of positions in Futures when starting an account
👉 Correction of minor bugs in the panel
❗ There were a lot of changes, please write if you notice an incorrect operation of the system
📣 code #update
- Added the ability to edit modules of open position. When the TP or SL module is disabled in open position, orders are not canceled automatically - its must be canceled manually. For now, when the number of TP orders decreases, the unnecessary orders must also be deleted manually. While this is the first version, later we will add a notification when the module is saved, now this is done without notification. Try it, give feedback if you find errors.
- Fixed changing the state on / off in the general settings of the module.
- Fixed the disappearance of the SL and TP lines when deleting a quantity and re-entering it in the form of an order
- Added the ability to edit modules of open position. When the TP or SL module is disabled in open position, orders are not canceled automatically - its must be canceled manually. For now, when the number of TP orders decreases, the unnecessary orders must also be deleted manually. While this is the first version, later we will add a notification when the module is saved, now this is done without notification. Try it, give feedback if you find errors.
- Fixed changing the state on / off in the general settings of the module.
- Fixed the disappearance of the SL and TP lines when deleting a quantity and re-entering it in the form of an order
📣 code #update
👉 Made the correct PNL counting for reverse positions. For example, there was a $100 Long position in Futures and we create a sell order for $200. The Long closes completely and the $100 Short opens.
Since one order remained in Long with an order size greater than the position itself, the profit calculation was incorrect.
🔥 Added the ability to reverse a position to signals.
Attention, the hedging mode must be turned off on Futures, otherwise the reverse will not work.
Upon receiving a closing signal, an order will be created that is 2 times larger than the current position and the first half will close the current position, and the second half will open the opposite direction.
🔥 Added the type of order filling % of the current balance to signals.
And also for futures added the type of order filling in % of the current balance multiplied by the leverage. For example, if you have $100 on your balance, the leverage is 20 and is 5% in the value of this setting, then the order will be 100 x 0.05 x 20 = $100
👉 Added correct handling of floating point numbers. You can specify a comma or period as a separator.
👉 Added correct processing of the names of currency pairs with the postfix -PERP for the Futures Market in the signals, if the pair name contained the {{ticker}} placeholder
👉 Fixed a bug with the SLX module working with real orders. This was due to the transition to zero amount in the stop order.
👉 Fixed a problem on Futures with a stop loss, which was not canceled on the exchange when a position was closed.
👉 Made the correct PNL counting for reverse positions. For example, there was a $100 Long position in Futures and we create a sell order for $200. The Long closes completely and the $100 Short opens.
Since one order remained in Long with an order size greater than the position itself, the profit calculation was incorrect.
🔥 Added the ability to reverse a position to signals.
Attention, the hedging mode must be turned off on Futures, otherwise the reverse will not work.
Upon receiving a closing signal, an order will be created that is 2 times larger than the current position and the first half will close the current position, and the second half will open the opposite direction.
🔥 Added the type of order filling % of the current balance to signals.
And also for futures added the type of order filling in % of the current balance multiplied by the leverage. For example, if you have $100 on your balance, the leverage is 20 and is 5% in the value of this setting, then the order will be 100 x 0.05 x 20 = $100
👉 Added correct handling of floating point numbers. You can specify a comma or period as a separator.
👉 Added correct processing of the names of currency pairs with the postfix -PERP for the Futures Market in the signals, if the pair name contained the {{ticker}} placeholder
👉 Fixed a bug with the SLX module working with real orders. This was due to the transition to zero amount in the stop order.
👉 Fixed a problem on Futures with a stop loss, which was not canceled on the exchange when a position was closed.
📣 # code update
🔥 Launch of the highly anticipated position control feature via webhook signals from TradingView!
To work with TradingView signals, you need to follow several steps:
1. have any paid subscription on TradingVew.com
2.Create and configure a signal connection in your finandy.com account
3. create and configure a signal in TradingView, and copy URL and message from Finandy.
The functionality is new, so try it on minimum orders.
📒 Instructions for working with webhooks (https://docs.finandy.com/trading-terminal/guide/tradingview-signals-webhooks)
🔥 Launch of the highly anticipated position control feature via webhook signals from TradingView!
To work with TradingView signals, you need to follow several steps:
1. have any paid subscription on TradingVew.com
2.Create and configure a signal connection in your finandy.com account
3. create and configure a signal in TradingView, and copy URL and message from Finandy.
The functionality is new, so try it on minimum orders.
📒 Instructions for working with webhooks (https://docs.finandy.com/trading-terminal/guide/tradingview-signals-webhooks)
📣 code #update
👉 Made for virtual stop losses (all markets) and real stop order (only Futures) setting the amount in the order to zero, which means closing the entire amount that is currently in the position. This should solve the problem of lack of margin in the Futures market, as well as when averaging a position with the SL module disabled, but the SLX module enabled. Removed the display of the amount on the chart for the Stop Loss
👉 Made for virtual stop losses (all markets) and real stop order (only Futures) setting the amount in the order to zero, which means closing the entire amount that is currently in the position. This should solve the problem of lack of margin in the Futures market, as well as when averaging a position with the SL module disabled, but the SLX module enabled. Removed the display of the amount on the chart for the Stop Loss
📣 code #update
- The URL did not change when changing the language, so when the page was reloaded the old language remained (FIXED)
- Fixed the correct loading of the chart in the FireFox browser
- Fixed the work of the website in Google Chrome in "Normal" mode. Previously, some users worked correctly only in the "Incognito" mode.
📣 code #update
Fixed the problem of creating shorts on the Margin market
The SL and TP modules now display the numbers in the price fields. You can use the arrows on the keyboard to change these values or delete and enter them using the numeric keypad.
The liquidation price was incorrectly shown when a Stop order is open a position (fixed)
When opening a position with several averaging orders to achieve the SL or all TPs, sometimes the position did not close visuality (fixed)
Fixed the problem of creating shorts on the Margin market
The SL and TP modules now display the numbers in the price fields. You can use the arrows on the keyboard to change these values or delete and enter them using the numeric keypad.
The liquidation price was incorrectly shown when a Stop order is open a position (fixed)
When opening a position with several averaging orders to achieve the SL or all TPs, sometimes the position did not close visuality (fixed)
📣 # code update
👉 We changed the balance display widget, it became more compact in order to add the display of useful information on the currency pair in the future.
👉 Made the block unfolding by opening the tab with the settings to the full height. When switching back to the position tab, the lower block will automatically collapse to its previous state.
👉 Improved the internal architecture for the Spot market, since it is the most loaded of all.
👉 Changed the icon for the notification tab
🔥 Webhooks are already ready, at the moment they are being tested and debugged, and at the beginning of next week you can already start working with them!
🔥 We make an isolated margin, we will announce it next week!
❓ #Know_or_you_what ...
1. Control modules have common settings, which are applied by default when creating each position. You need to select the module in the list on the left, change the settings on the right and click the "Save" button
2. And also there are individual settings for each position, which are configured only for the new position.
1. Control modules have common settings, which are applied by default when creating each position. You need to select the module in the list on the left, change the settings on the right and click the "Save" button
2. And also there are individual settings for each position, which are configured only for the new position.
Jump to: