[Forager] v18.08.3 - Multi-Pool profit switching miner (AMD/NVIDIA/CPU) - page 13.

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: 4ward on June 26, 2018, 12:42:58 AM

Quote from: alucard20724 on June 26, 2018, 12:19:02 AM

lyclMiner version 0.1.5 released Amd Lyra2v2 miner.

https://github.com/CryptoGraphics/lyclMiner/releases

updated, hopefully detection will work better now

define devices manually in pattern file if it doesnt work

there was an error in the config file when i tried to run and errored out.

If i manually put the devices in the pattern, then it worked

fyi... you didn't create a lyclMiner-0.1.5.json file..

4ward

member

Activity: 473

Merit: 18

Quote from: Sharpeich on June 26, 2018, 03:12:20 AM

Please add the Wild Keccak algo support

~~It is supported~~
Keccak is supported, not Wild Keccak

Edit:
Wild Keccak requires a scratchpad which is coin specific and its complicated to add it to an algo switching miner...

Although I will look into it )

Sharpeich

newbie

Activity: 62

Merit: 0

Please add the Wild Keccak algo support

4ward

member

Activity: 473

Merit: 18

Quote from: alucard20724 on June 26, 2018, 12:19:02 AM

lyclMiner version 0.1.5 released Amd Lyra2v2 miner.

https://github.com/CryptoGraphics/lyclMiner/releases

updated, hopefully detection will work better now

define devices manually in pattern file if it doesnt work

alucard20724

sr. member

Activity: 703

Merit: 272

lyclMiner version 0.1.5 released Amd Lyra2v2 miner.

https://github.com/CryptoGraphics/lyclMiner/releases

4ward

member

Activity: 473

Merit: 18

Quote from: ?? on ??

^ Hoe much hash do yoy get on Vega 64 on lyra2v2 lycl miner ? Can it beat 1080ti ?

from https://www.reddit.com/r/vertcoin/comments/8svyvr/amd_full_release/

AMD VEGA series
VEGA 64 -75mh/s
VEGA 56 -60mh/s
AMD 500 series
RX 580 -42mh/s
RX 570 -36mh/s
RX 560 -16mh/s
RX 550 -8mh/s
AMD 400 series
RX 480 -32mh/s
AMD 300 series
AMD 200 series
R9 280X -23mh/s
R9 270 ~13mh/s
7970- 21mh/s

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: alucard20724 on June 24, 2018, 01:41:57 PM

Quote from: 4ward on June 24, 2018, 01:29:08 PM

Quote from: alucard20724 on June 24, 2018, 01:05:59 PM

Quote from: alucard20724 on June 24, 2018, 10:26:24 AM

Quote from: 4ward on June 24, 2018, 06:43:35 AM

Added lyclMiner support in automatic device detection mode (without defined GpuGroups)

Trying it now.. benchmarked fine. things appear to be working fine

thanks

getting an error. four gpu in system. but lyclMiner says device1 is wrong. "PCIeBusId" is incorrect inside "Device1" section

here's the error

Here's the config that was made up.

might be related to a problem that was talked about in the discord channel... don't know yet

Is there a difference between config generated by lyclMiner and the one generated by Forager?
If there is, can you post it? Which one is giving issues?

p.s. which Discord channel?

config generated by lyclMiner

one generated by Forager

lycl generated config works fine. Forager config gives errors.

so it seems that it isn't lyclMiner issue discussed in discord channel. I'll send you the discord invite later... i found it in one of the forums about vertcoin. it's in the official vertcoin discord channel

ok... i'm not seeing the issue on another system that has 4 vega64 cards... i'm only seeing the issue on the system with 4 RX570 cards... might be lyclminer or it might be a system issue. i'll have to investigate it later.

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: 4ward on June 24, 2018, 01:29:08 PM

Quote from: alucard20724 on June 24, 2018, 01:05:59 PM

Quote from: alucard20724 on June 24, 2018, 10:26:24 AM

Quote from: 4ward on June 24, 2018, 06:43:35 AM

Added lyclMiner support in automatic device detection mode (without defined GpuGroups)

Trying it now.. benchmarked fine. things appear to be working fine

thanks

getting an error. four gpu in system. but lyclMiner says device1 is wrong. "PCIeBusId" is incorrect inside "Device1" section

here's the error

Here's the config that was made up.

might be related to a problem that was talked about in the discord channel... don't know yet

Is there a difference between config generated by lyclMiner and the one generated by Forager?
If there is, can you post it? Which one is giving issues?

p.s. which Discord channel?

config generated by lyclMiner

one generated by Forager

lycl generated config works fine. Forager config gives errors.

so it seems that it isn't lyclMiner issue discussed in discord channel. I'll send you the discord invite later... i found it in one of the forums about vertcoin. it's in the official vertcoin discord channel

4ward

member

Activity: 473

Merit: 18

Quote from: alucard20724 on June 24, 2018, 01:05:59 PM

Quote from: alucard20724 on June 24, 2018, 10:26:24 AM

Quote from: 4ward on June 24, 2018, 06:43:35 AM

Added lyclMiner support in automatic device detection mode (without defined GpuGroups)

Trying it now.. benchmarked fine. things appear to be working fine

thanks

getting an error. four gpu in system. but lyclMiner says device1 is wrong. "PCIeBusId" is incorrect inside "Device1" section

here's the error

Here's the config that was made up.

might be related to a problem that was talked about in the discord channel... don't know yet

Is there a difference between config generated by lyclMiner and the one generated by Forager?
If there is, can you post it? Which one is giving issues?

p.s. which Discord channel?

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: alucard20724 on June 24, 2018, 10:26:24 AM

Quote from: 4ward on June 24, 2018, 06:43:35 AM

Added lyclMiner support in automatic device detection mode (without defined GpuGroups)

Trying it now.. benchmarked fine. things appear to be working fine

thanks

getting an error. four gpu in system. but lyclMiner says device1 is wrong. "PCIeBusId" is incorrect inside "Device1" section

here's the error

Here's the config that was made up.

might be related to a problem that was talked about in the discord channel... don't know yet

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: 4ward on June 24, 2018, 06:43:35 AM

Added lyclMiner support in automatic device detection mode (without defined GpuGroups)

Trying it now.. benchmarked fine. things appear to be working fine

thanks

4ward

member

Activity: 473

Merit: 18

Added lyclMiner support in automatic device detection mode (without defined GpuGroups)

4ward

member

Activity: 473

Merit: 18

Quote from: alucard20724 on June 24, 2018, 03:39:49 AM

Quote from: 4ward on June 23, 2018, 01:54:21 AM

Quote from: alucard20724 on June 22, 2018, 12:21:07 AM

Quote from: 4ward on June 17, 2018, 11:45:24 PM

Forager 1.8 released
https://github.com/yuzi-co/Forager/releases

.....

can you implement a new Lyra2REv2 miner for AMD?

https://github.com/CryptoGraphics/lyclMiner

thanks

In current state of the miner, there would be lots of changes to Forager code required to fully support it

I have it running locally, but the device configuration is still manual due to miner's requirement of using PCIeBus id

Are you able to at least get the hashrate to display in Forager? I'm not worried about the manual configuration of the devices. I would think you would be able to implement it along the lines of how excavator is done.

looks like they're going to try something over at MPM.
https://github.com/MultiPoolMiner/MultiPoolMiner/issues/1894

Hashrate display works. I pushed a preliminary version, but you will need to set the devices yourself in the pattern file

And to implement PCIBus I need to rewrite lots of stuff in the device detection, but i hope the developer will change the device selection

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: 4ward on June 23, 2018, 01:54:21 AM

Quote from: alucard20724 on June 22, 2018, 12:21:07 AM

Quote from: 4ward on June 17, 2018, 11:45:24 PM

Forager 1.8 released
https://github.com/yuzi-co/Forager/releases

.....

can you implement a new Lyra2REv2 miner for AMD?

https://github.com/CryptoGraphics/lyclMiner

thanks

In current state of the miner, there would be lots of changes to Forager code required to fully support it

I have it running locally, but the device configuration is still manual due to miner's requirement of using PCIeBus id

Are you able to at least get the hashrate to display in Forager? I'm not worried about the manual configuration of the devices. I would think you would be able to implement it along the lines of how excavator is done.

looks like they're going to try something over at MPM.
https://github.com/MultiPoolMiner/MultiPoolMiner/issues/1894

4ward

member

Activity: 473

Merit: 18

Quote from: alucard20724 on June 22, 2018, 12:21:07 AM

Quote from: 4ward on June 17, 2018, 11:45:24 PM

Forager 1.8 released
https://github.com/yuzi-co/Forager/releases

Changelog:
- Updated Miners
- SRBminer 1.6.0
- CCminerDelos 1.3.0a
- coolMiner 1.3
- CastXMR 1.2.0
- Prospector 0.1.0
- zEnemy 1.11
- XMR-Stak 2.4.5
- XMRig cpu 2.6.3
- XMRig AMD 2.7.0b
- zFast 2.3.4
- Excavator 1.5.5a
- CCminer Tpuvot 2.2.6
- JCEminer 0.29c
- New Miners
- SGminer MK 1.07
- lolMinerZero 0.37 (preview)
- EWBF 0.2 (Zero and Zhash)
- General fixes and tweaks

can you implement a new Lyra2REv2 miner for AMD?

https://github.com/CryptoGraphics/lyclMiner

thanks

In current state of the miner, there would be lots of changes to Forager code required to fully support it

I have it running locally, but the device configuration is still manual due to miner's requirement of using PCIeBus id

alucard20724

sr. member

Activity: 703

Merit: 272

Quote from: 4ward on June 17, 2018, 11:45:24 PM

Forager 1.8 released
https://github.com/yuzi-co/Forager/releases

Changelog:
- Updated Miners
- SRBminer 1.6.0
- CCminerDelos 1.3.0a
- coolMiner 1.3
- CastXMR 1.2.0
- Prospector 0.1.0
- zEnemy 1.11
- XMR-Stak 2.4.5
- XMRig cpu 2.6.3
- XMRig AMD 2.7.0b
- zFast 2.3.4
- Excavator 1.5.5a
- CCminer Tpuvot 2.2.6
- JCEminer 0.29c
- New Miners
- SGminer MK 1.07
- lolMinerZero 0.37 (preview)
- EWBF 0.2 (Zero and Zhash)
- General fixes and tweaks

can you implement a new Lyra2REv2 miner for AMD?

https://github.com/CryptoGraphics/lyclMiner

thanks

4ward

member

Activity: 473

Merit: 18

Forager 1.8 released
https://github.com/yuzi-co/Forager/releases

Changelog:
- Updated Miners
- SRBminer 1.6.0
- CCminerDelos 1.3.0a
- coolMiner 1.3
- CastXMR 1.2.0
- Prospector 0.1.0
- zEnemy 1.11
- XMR-Stak 2.4.5
- XMRig cpu 2.6.3
- XMRig AMD 2.7.0b
- zFast 2.3.4
- Excavator 1.5.5a
- CCminer Tpuvot 2.2.6
- JCEminer 0.29c
- New Miners
- SGminer MK 1.07
- lolMinerZero 0.37 (preview)
- EWBF 0.2 (Zero and Zhash)
- General fixes and tweaks

4ward

member

Activity: 473

Merit: 18

Quote from: Ledaso on June 07, 2018, 10:43:03 AM

wow gj Thanks for take your time and make this...

Thank you

Ledaso

newbie

Activity: 16

Merit: 0

wow gj Thanks for take your time and make this...

4ward

member

Activity: 473

Merit: 18

Quote from: preda on June 07, 2018, 06:53:32 AM

Quote from: 4ward on June 07, 2018, 06:46:26 AM

Quote from: preda on June 07, 2018, 05:00:44 AM

Quote from: 4ward on June 05, 2018, 11:17:27 AM

Forager 1.7 released
https://github.com/yuzi-co/Forager/releases

Changelog:
- Update miners:
  - zFast v2.3.3
  - SRBminer v1.5.8
  - BMiner v8.0 (with DualMining)
  - JCEminer v0.29b
  - Phoenix v3.0c
  - Excavator v1.5.4.a
  - EthMiner v0.15dev11
  - XMR-Stak v2.4.4
  - CastXMR v1.1
  - Claymore Dual v11.8
  - SgminerKL v1.0.5
  - CcminerSTS v2.2.6R
  - XMR-Stak-Aeon v2.4.8
  - CcminerEnemy v1.11
- New Miners:
  - CCminer Delos v1.2.2
  - CoolMiner v1.1
- Update Pools:
  - WhatToMine
  - SuprNova
  - NanoPool
  - FairPool
  - CoinCalculators
- Get Algo divisors from API on supported pools
- Rework Logging
- Allow collecting sessions statistics to CSV file
- More fixes and tweaks

phoenix 0.3c??? where do you get it??

in the Phoenix miner topic Wink

Quote

can you integrate cryptodredge? so far the best miner for lyra2v2 nvidia going very good and stable

It's actually already in the master branch, although disabled by default since it doesn't work with wrapper and they don't provide API yet

can i enable it?

copy miner file from "Additional Miners" to "Miners" and see if it works for you. No guarantees though...

Topic: [Forager] v18.08.3 - Multi-Pool profit switching miner (AMD/NVIDIA/CPU) - page 13. (Read 24744 times)