Fresh Coin Faucet
http://altcoinix.com/faucets/fresh-faucet/
All Donation Wellcome!
Make Donate and Keep it Live!
http://altcoinix.com/faucets/fresh-faucet/
All Donation Wellcome!
Make Donate and Keep it Live!
Topic: [FRSH] FreshCoin | Freshcoin for 1$ into game | LOW ALGO | POM | FRESH online!* - page 178. (Read 334880 times)
July 07, 2014, 05:19:05 PM
July 07, 2014, 05:17:44 PM
all fresh rigs are rented in miningrentals , any other place ? like betarigs
July 07, 2014, 05:17:07 PM
With 14.6 again nothing.
COLOR 0A
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\Users\Administrator.LiteCoin-PC\Desktop\FRESH\sgminer.exe -o stratum+tcp://fresh.suprnova.cc:5000 --algorithm fresh --name FRESH -u ...... -p ....... --gpu-platform 1 -I 19 -g 2 -w 64 --gpu-memclock 1250 --gpu-engine 1070 --gpu-fan 50 --gpu-powertune 20
on R280x
COLOR 0A
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\Users\Administrator.LiteCoin-PC\Desktop\FRESH\sgminer.exe -o stratum+tcp://fresh.suprnova.cc:5000 --algorithm fresh --name FRESH -u ...... -p ....... --gpu-platform 1 -I 19 -g 2 -w 64 --gpu-memclock 1250 --gpu-engine 1070 --gpu-fan 50 --gpu-powertune 20
on R280x
remove the path ... my bad
Thanks maan
July 07, 2014, 05:16:18 PM
July 07, 2014, 05:13:20 PM
first was coin confirmed than got to unconfirmed!
and why i only get 27 coins with 30mh since hours?
and why i only get 27 coins with 30mh since hours?
Maybe that was because they hadn't updated their coinbase maturity settings on the pool software first - so this was adjusted later. There is nothing scammy about that.
As for your shares.. do you have proof of this?
You cannot just go publically claiming a "scam" without suitable evidence.
and why only 27 coins in hours,with 30mhs machine?
July 07, 2014, 05:12:15 PM
98.507305 uncofirmed FRSH on supernova for me?
July 07, 2014, 05:10:22 PM
With 14.6 again nothing.
COLOR 0A
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\Users\Administrator.LiteCoin-PC\Desktop\FRESH\sgminer.exe -o stratum+tcp://fresh.suprnova.cc:5000 --algorithm fresh --name FRESH -u ...... -p ....... --gpu-platform 1 -I 19 -g 2 -w 64 --gpu-memclock 1250 --gpu-engine 1070 --gpu-fan 50 --gpu-powertune 20
on R280x
COLOR 0A
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\Users\Administrator.LiteCoin-PC\Desktop\FRESH\sgminer.exe -o stratum+tcp://fresh.suprnova.cc:5000 --algorithm fresh --name FRESH -u ...... -p ....... --gpu-platform 1 -I 19 -g 2 -w 64 --gpu-memclock 1250 --gpu-engine 1070 --gpu-fan 50 --gpu-powertune 20
on R280x
remove the path ... my bad
July 07, 2014, 05:10:01 PM
Quote
set gpu-platform to either 0 or 1
and install 14.6 beta 2 after you uninstall previous drivers
and install 14.6 beta 2 after you uninstall previous drivers
Installed 14.6 beta, i set gpu-platform to 0 or 1?
Give me config .bat for 280x.
Thanks
try 0, if that doesnt work, then try 1.
July 07, 2014, 05:09:52 PM
first was coin confirmed than got to unconfirmed!
and why i only get 27 coins with 30mh since hours?
and why i only get 27 coins with 30mh since hours?
Maybe that was because they hadn't updated their coinbase maturity settings on the pool software first - so this was adjusted later. There is nothing scammy about that.
As for your shares.. do you have proof of this?
You cannot just go publically claiming a "scam" without suitable evidence.
July 07, 2014, 05:08:49 PM
Finally i got my sgminer version running smoothly
https://mega.co.nz/#!dEMjjAoa!a8VYBUYztgBXm5q4d8Pq5R4WM4VxwfwfK7mGqi5Hi2I
Update your driver to 14.6 for better hashrate
There's 3 .bin file for 270x, 280x and 7950 in the archive for anyone don't have driver 14.6, and remember set --gpu-platform 0 for 13.12 driver
Currently performance :
7950 : 3.6MH/s (1030/1250)
270x : 2.85MH/s (1100/1400)
280x : 4.5MH/s (1100/1500)
Github source :
https://github.com/aznboy84/freshgpu
Don't expect any further optimization because those algo was optimized already
+30% improvement for my 7950s compared to official miner. You are a genius! https://mega.co.nz/#!dEMjjAoa!a8VYBUYztgBXm5q4d8Pq5R4WM4VxwfwfK7mGqi5Hi2I
Update your driver to 14.6 for better hashrate
There's 3 .bin file for 270x, 280x and 7950 in the archive for anyone don't have driver 14.6, and remember set --gpu-platform 0 for 13.12 driver
Currently performance :
7950 : 3.6MH/s (1030/1250)
270x : 2.85MH/s (1100/1400)
280x : 4.5MH/s (1100/1500)
Github source :
https://github.com/aznboy84/freshgpu
Don't expect any further optimization because those algo was optimized already
can you post the build?
wow thanks
now 2,8 mh on 270x
I have 13.2 drivers and nothing happen.Miner closed it self when I started.
With 14.6 again nothing.
COLOR 0A
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
C:\Users\Administrator.LiteCoin-PC\Desktop\FRESH\sgminer.exe -o stratum+tcp://fresh.suprnova.cc:5000 --algorithm fresh --name FRESH -u ...... -p ....... --gpu-platform 1 -I 19 -g 2 -w 64 --gpu-memclock 1250 --gpu-engine 1070 --gpu-fan 50 --gpu-powertune 20
on R280x
July 07, 2014, 05:07:56 PM
i can't get the miner to start with this .bat
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cmd /k ipconfig sgminer -k fresh -o stratum+tcp://fresh.suprnova.cc:5000 -u **** -p x -w 256 -I 15 -g 2 --thread-concurrency 8192
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cmd /k ipconfig sgminer -k fresh -o stratum+tcp://fresh.suprnova.cc:5000 -u **** -p x -w 256 -I 15 -g 2 --thread-concurrency 8192
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
:BEGIN
sgminer --kernel fresh -o stratum+tcp://fresh.suprnova.cc:5000 -u **** -p x -w 256 -I 15 -g 2 --thread-concurrency 8192
timeout /t 30
GOTO BEGIN
exit
July 07, 2014, 05:05:45 PM
i can't get the miner to start with this .bat
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cmd /k ipconfig sgminer -k fresh -o stratum+tcp://fresh.suprnova.cc:5000 -u **** -p x -w 256 -I 15 -g 2 --thread-concurrency 8192
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
cmd /k ipconfig sgminer -k fresh -o stratum+tcp://fresh.suprnova.cc:5000 -u **** -p x -w 256 -I 15 -g 2 --thread-concurrency 8192
July 07, 2014, 05:03:03 PM
After my writing that http://fresh.pool.mn/ is a SCAM, because they deleted all my shares,
they put all my confirmed freshcoins to unconfirmed!
They are SCAM
they put all my confirmed freshcoins to unconfirmed!
They are SCAM
well, there are no freshcoins confirmed yet ANYWHERE.. so er..hate to call this BS... but you just proved that you are lying
Coinbase Maturity = 360 rounds. Current Height 347 Rounds.
and why i only get 27 coins with 30mh since hours?
July 07, 2014, 05:02:52 PM
Im getting alot of hardware errors . . Anyone have the settings for a r9 280x
thx
thx
July 07, 2014, 05:02:14 PM
fake share hasher detected on hashharder fresh pool, miner should leave before ur shares were stolen
July 07, 2014, 05:00:40 PM
After my writing that http://fresh.pool.mn/ is a SCAM, because they deleted all my shares,
they put all my confirmed freshcoins to unconfirmed!
They are SCAM
they put all my confirmed freshcoins to unconfirmed!
They are SCAM
well, there are no freshcoins confirmed yet ANYWHERE.. so er..hate to call this BS... but you just proved that you are lying
Coinbase Maturity = 360 rounds. Current Height 347 Rounds.
July 07, 2014, 05:00:33 PM
After my writing that http://fresh.pool.mn/ is a SCAM, because they deleted all my shares,
they put all my confirmed freshcoins to unconfirmed!
They are SCAM
they put all my confirmed freshcoins to unconfirmed!
They are SCAM
are you sure about what you are saying ? maybe pool have problems ?
cheers
July 07, 2014, 04:56:58 PM
Finally i got my sgminer version running smoothly
Win32 binary :
https://mega.co.nz/#!dEMjjAoa!a8VYBUYztgBXm5q4d8Pq5R4WM4VxwfwfK7mGqi5Hi2I
Update your driver to 14.6 for better hashrate
There's 3 .bin file for 270x, 280x and 7950 in the archive for anyone don't have driver 14.6, and remember set --gpu-platform 0 for 13.12 driver
Currently performance :
7950 : 3.6MH/s (1030/1250)
270x : 2.85MH/s (1100/1400)
280x : 4.5MH/s (1100/1500)
Github source :
https://github.com/aznboy84/freshgpu
Linux build instructions (some dude confirmed it works so i hope it does
)
Don't expect any further optimization because those algo was optimized already
[/b][/size]
Win32 binary :
https://mega.co.nz/#!dEMjjAoa!a8VYBUYztgBXm5q4d8Pq5R4WM4VxwfwfK7mGqi5Hi2I
Update your driver to 14.6 for better hashrate
There's 3 .bin file for 270x, 280x and 7950 in the archive for anyone don't have driver 14.6, and remember set --gpu-platform 0 for 13.12 driver
Currently performance :
7950 : 3.6MH/s (1030/1250)
270x : 2.85MH/s (1100/1400)
280x : 4.5MH/s (1100/1500)
Github source :
https://github.com/aznboy84/freshgpu
Linux build instructions (some dude confirmed it works so i hope it does
)Quote
cd /opt
git clone https://github.com/aznboy84/freshgpu.git
cd freshgpu
git submodule update --init --recursive
sh autogen.sh
CFLAGS="-O2 -Wall -march=native" ./configure
make
git clone https://github.com/aznboy84/freshgpu.git
cd freshgpu
git submodule update --init --recursive
sh autogen.sh
CFLAGS="-O2 -Wall -march=native" ./configure
make
Don't expect any further optimization because those algo was optimized already
[/b][/size]
Thanks a lot, mining something for you now.
July 07, 2014, 04:56:05 PM
A few hickups though:
temp parameters aren't recognised (eg. --temp-cutoff) and I don't see temps/rpm displayed in the miner window. I'm rebooting the rig now to see if it's temporary...
temp parameters aren't recognised (eg. --temp-cutoff) and I don't see temps/rpm displayed in the miner window. I'm rebooting the rig now to see if it's temporary...
Temp won't show due to the lack of ADL_SDK, go get em and copy to ADK_SDK folder
http://developer.amd.com/tools-and-sdks/graphics-development/display-library-adl-sdk/
Download them, and copy the include/* dir to your ADL_SDK/ directory (which is empty) in the miner directory
July 07, 2014, 04:55:11 PM
What is wrong with this dev... He tells us what he will do and then he goes and does it and delivers??? WTH 
I don't understand what you ment to say here?
this is wrong ...
I use this setting:
COLOR 0A
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
D:\FRESHAMD\sgminer.exe -o 127.0.0.1:22111 --algorithm fresh --name FRESH -u XXX -p XXX --gpu-platform 1 --intensity 19 -g 2 -w 128 --gpu-memclock 1250 --gpu-engine 1030 --gpu-fan 70 --gpu-powertune 20
Are you solo mining? Because your pointed locally.
Can you post your coin .conf file?
try to use:
rpcuser=XXX
rpcpassword=XXX
listen=1
server=1
daemon=1
rpcallowip=127.0.0.1
addnode=144.76.142.47
addnode=144.76.142.49
addnode=fresh.suprnova.cc
addnode=fresh.hardcoreminers.com
But make the rpsuser and password longer, sometimes that wont work with a short password and user
still not working ...
I solo mining
this is my freshCoin.conf:
rpcuser=rononronon
rpcpassword=xxx123xxx
listen=1
server=1
daemon=1
rpcallowip=127.0.0.1
addnode=144.76.142.47
addnode=144.76.142.49
addnode=fresh.suprnova.cc
addnode=fresh.hardcoreminers.com
Jump to: