Pages:
Author

Topic: [FS] GS Server PSUs, boards & kits, Stickminers, GPU riser power, made in USA - page 3. (Read 16045 times)

legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
Dual-Purpose DPS800/DPS1200 Interface Board

This board is designed to work with both DPS800 and DPS1200 (HP Common Slot) edge-connector PSUs.

Yes
sr. member
Activity: 469
Merit: 500
Bump for DPS1200/800 boards are in stock.

I'm also working on prototypes for some hardware to assist with building GPU rigs powered from server supplies (no ATX required), which includes custom cabling. I can do 6+2 cables, splitters and adapters, and 4-Molex connections for powering GPU risers.

I also will soon have prototypes for the new Dell 750W board, which are made to take PCIe 6-pin jacks for quick cabling and can be paired to load-balance and operate from a single on/off switch very easily. This provides you with probably the cheapest reliable/reputable option to run an S7 or S9 off 120V power.

does the 1200/800 board work on the dps800gba psu?
legendary
Activity: 4354
Merit: 3614
what is this "brake pedal" you speak of?

I'm also working on prototypes for some hardware to assist with building GPU rigs powered from server supplies (no ATX required), which includes custom cabling. I can do 6+2 cables, splitters and adapters, and 4-Molex connections for powering GPU risers.


this would be interesting. single server psu plus your hardware for a complete atx motherboard based gpu miner rig?
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
Bump for DPS1200/800 boards are in stock.

I'm also working on prototypes for some hardware to assist with building GPU rigs powered from server supplies (no ATX required), which includes custom cabling. I can do 6+2 cables, splitters and adapters, and 4-Molex connections for powering GPU risers.

I also will soon have prototypes for the new Dell 750W board, which are made to take PCIe 6-pin jacks for quick cabling and can be paired to load-balance and operate from a single on/off switch very easily. This provides you with probably the cheapest reliable/reputable option to run an S7 or S9 off 120V power.
legendary
Activity: 1096
Merit: 1021
Is there like a molex cable or something that I can buy so that I can connect an ATX PSU to the remote on for the 750W interface board?  I'd like to setup an eth rig to run off a smaller ATX power supply and then have the video cards run by the 750W and would prefer if they turned on and off together.  From what I read on the 750W interface boards there's a pin and a dip switch for remote on but I'm not very technical at these things.  Or perhaps there's a USB cable that I can connect to the remtoe on pin?
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Still looking for 1 lone 2000 watt board .  anyone?
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
Sure, if you got a PicoPSU. Buying one of those that take in 12V directly and provide all the connections for a motherboard is a heck of a lot easier than me designing a new board to do it all and provide the cabling.
newbie
Activity: 13
Merit: 0
Hey mate,

Any chance to get these to work with atx mobos and cpus?

cheers
legendary
Activity: 4256
Merit: 8551
'The right to privacy matters'
Bump, I've still got DPS812 boards available. I'm looking into redesigning the Dell 750W board to take screw terminals or 6-pin jacks like the new DPS812 board and, if the right thing or two comes together, I'll probably be doing a batch soon. One idea is to offer a two-supply kit with all the cabling required to power an S7 or S9 for about $100, and these would do it off 120VAC.

well if you have a two-supply kit for an s9 at 100 and able to do 120 or 240 ac  it would be nice.

120 volt players are stuck with  the evga 1600 g2 at 300 the evga p2 at 350 and the evga 1600 t2 at 400

I have 120 and 240 available.

 I have 4  s-9's on order and  I would not mind ordering 1 of these prototype kits for 100

i would like to see how practical it is for a 120 volt guy.

I know with proper setup the s-9 should see it as 1 psu.

and it is about 50 usd lower then the antminer psu which needs 220 volt.
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
Bump, I've still got DPS812 boards available. I'm looking into redesigning the Dell 750W board to take screw terminals or 6-pin jacks like the new DPS812 board and, if the right thing or two comes together, I'll probably be doing a batch soon. One idea is to offer a two-supply kit with all the cabling required to power an S7 or S9 for about $100, and these would do it off 120VAC.
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
All my DPS812 boards currently are spoken for, but I'll have a couple hundred more available within a couple weeks.
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
Updating for new product, dual-function DPS800/DPS1200 board. I still get a lot of requests for the D750 and DPS2K boards, so I plan on doing batches of those again as soon as I can - which unfortunately won't be for a couple months. And as always, work continues on other new projects.
newbie
Activity: 33
Merit: 0
Guess I'll just make my own as I only need two, I just ordered some Amphenol FCI 51915-064LF's, most of the time I have to do this when the "big-demand" cools down and people don't want to stock anymore
newbie
Activity: 33
Merit: 0
Anyone have any Dell 750W Interface Board's ?  ++++OUT OF STOCK++++
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
Well, unfortunately I'm out of stock on both 750W and 2KW boards. Here soon I will have some nice boards for edge-connector PSUs, namely a board which works for DPS800 and DPS1200/Common Slot family. I've been busy with other things, and haven't had the resources to put into batches of boards.
newbie
Activity: 33
Merit: 0
Where can ya buy these, no one has them anymore and I need two !! Sad
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
The second batch of Compac stick miners should be appearing within a week or two. I'm a bit behind schedule on manufacturing for them.

We're also sold out on 750W PSU boards right now, but another batch should be ready around the first of December.

I'm working on an 8-chip pod miner that takes a standard CPU cooler, made with recycle parts. There's a trade-in program going to happen, where you can trade old or dead miners for these small miners. They'll run about the same efficiency curve as the Compac stickminer (0.3-0.55W/GH or so) with an expected draw around 15W for 44GH at the bottom and about 120W for 200GH at the top. Voltage will be software-adjustable. More details in this thread:  https://bitcointalksearch.org/topic/bm1384-pod-miner-plus-trade-inrecycling-an-interest-and-feasibility-poll-1203190
If that sounds like something you'd get in on, please cast a vote. I'll use the results of that poll to determine how many I want to make.

We also will soon have prototypes and get started running out a batch of new server supply boards. The board will work with DPS800 and DPS1200 supplies, and any other PSU which uses the same pinout. You'll have the option of either our standard screw terminals (8 positions per rail), or 6-pin PCIe connectors (10 per board). All the favorite features will be included - external on, power good signal, 3.3V standby, and the optional 5VDC aux supply.

We're also in the process of upgrading our hosting infrastructure and adding about 50KW of power, which I should have online by the first of December. We'll be dropping the standard rate to about $65 per KW-month and there is no minimum power draw. As always, VPN remote access is free. We'll probably be offering some nifty packages like discounted PSU purchases or free use of PSUs for new customers on things like the S7 or Avalon6. This is deliberately a teaser update and more details will follow because I don't have them all yet.

GekkoScience is going to be pretty darn busy the rest of the year, but it should be pretty great.
hero member
Activity: 686
Merit: 500
Bump for Compac information added, and a bit of stress put on that we're out of DPS2K boards (though have PSUs available) and folks should get ahold of Scrappy Do to buy his stock.

 Thank you so much for help sidehack again you are top notch. I have 4 unopened 2000w boards 8 2000w psus, as well as 4 Dell 750 psus and boards. If you need them I will sell at 15% off Sides listed, you pay shipping.

 I also have tons of cables from him. simply tell me what ya need.

 Please help a man not get kicked out by his wife!

Scrapp' out
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
Bump for Compac information added, and a bit of stress put on that we're out of DPS2K boards (though have PSUs available) and folks should get ahold of Scrappy Do to buy his stock.
legendary
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
Yeah, I'm pretty much at the bottom of my stash of 2KW gear. Buy this guy's. He's been screwed enough and needs a break.

Scrappy, you ever get anything out of Technobit or are they still MIA?

Oh also, not sure if anyone's following the dev over in the hardware thread but we're about ready to start selling BM1384 stickminers (the same chip on the S5) that come in around 0.3W/GH with adjustable clock and voltage. It's technically a preorder, but if you've been watching the dev and review threads you know there's zero dev cost or time coming from the "preorder" funding. It's already designed and thoroughly tested, with test units delivered to 8 other people for review and such. Sales will go to bulk purchase of parts and I start building 'em and shipping as soon as the parts come in. MacEntyre is going to be manufacturing for Europe sales and valkir will be arranging a Canada group buy.
Pages:
Jump to: