Pages:
Author

Topic: Funakoshi Cuda miner is fast and clean from viruses (windows, ubuntu, fedora) - page 5. (Read 2421 times)

newbie
Activity: 99
Merit: 0
Hi,

I can see a substantial drop in CPU consumption (around 25% CPU load, was 80-85%) and some speed bump.
My 1070ti test card shows 560-570 Sol/s (which is much more than DSTM's 495 Sol/s...), but let's wait what pool will report.
As previous version: rock stable on Ubuntu 16.04!

Keep going, Funakoshi!

Cheers,
Andy

Thanks for the encoragement Andy
newbie
Activity: 48
Merit: 0
Hi,

I can see a substantial drop in CPU consumption (around 25% CPU load, was 80-85%) and some speed bump.
My 1070ti test card shows 560-570 Sol/s (which is much more than DSTM's 495 Sol/s...), but let's wait what pool will report.
As previous version: rock stable on Ubuntu 16.04!

Keep going, Funakoshi!

Cheers,
Andy
jr. member
Activity: 176
Merit: 1
Miner has crashed to desktop with no errors, window just shut down..  Reverting back to EWBF until further development has occurred.  I see potential.  Appeared to be 30 to 40 hash slower than EWBF from mining app reporting.
jr. member
Activity: 176
Merit: 1
Back from a system failure less than 5 minutes after running the program.  PC became unresponsive, mouse cursor stopped working and then the screen went black.  Music still playing but had to reboot.  System has been solid on the other miners with my current OC's.  I also run xmr-stak on my CPU along w/ the 3 1080s that are in this box.

I am loading the box in the same manner and trying again.
jr. member
Activity: 176
Merit: 1
I changed the port to 3443 in the bat file and I have now connected.  My current hash rate on this rig on flypool is 1.6 kH/ w/ EWBF's miner.  I will update tomorrow with what this value has changed to running your software.
jr. member
Activity: 176
Merit: 1

You should write    us1-zcash.flypool.org:3443    (you need to specify the ssl port of pool server).
Otherwise the miner can't connect with pool server.


I'm executing the exe via a batch file and I had the port in there.  However I copied my EWBF config and it was using port 3333.

funakoshiMiner -cd 0 1 2 -l us1-zcash.flypool.org:3333 -u 123.rig
newbie
Activity: 11
Merit: 0
What hash rate should I expect from titan x pascal (2016 version).  I have not found any miner better than excavator with same settings.  I get around 760 h/s.
newbie
Activity: 99
Merit: 0
[2018-Feb-20 12:31:43] CUDA error 'CUDA driver version is insufficient for CUDA runtime version' at line 61

Version of CUDA?

Version 9
newbie
Activity: 2
Merit: 0
[2018-Feb-20 12:31:43] CUDA error 'CUDA driver version is insufficient for CUDA runtime version' at line 61

Version of CUDA?
newbie
Activity: 99
Merit: 0
[2018-Feb-19 20:08:31] [MINER] Using pool: us1-zcash.flypool.org
[2018-Feb-19 20:08:31] [MINER] Starting miner
[2018-Feb-19 20:08:31] [GPU-0] FUNAKOSHI-solver starts mining (device-info: GeForce GTX 1080, version: 6.1, device: 0)
[2018-Feb-19 20:08:32] [GPU-1] FUNAKOSHI-solver starts mining (device-info: GeForce GTX 1080, version: 6.1, device: 1)
[2018-Feb-19 20:08:33] [MINER] Connecting to stratum server us1-zcash.flypool.org:3333
[2018-Feb-19 20:08:33] [GPU-2] FUNAKOSHI-solver starts mining (device-info: GeForce GTX 1080, version: 6.1, device: 2)
[2018-Feb-19 20:08:33] [GPU-0] Temperature: 50, temp-max: 0, temp-min: 0
Power Draw: 41607 milliwatts
[2018-Feb-19 20:08:35] [GPU-1] Temperature: 45, temp-max: 0, temp-min: 0
Power Draw: 43377 milliwatts
[2018-Feb-19 20:08:37] [GPU-2] Temperature: 43, temp-max: 0, temp-min: 0
Power Draw: 45896 milliwatts
[2018-Feb-19 20:08:38] [MINER] wrong version number
[2018-Feb-19 20:08:38] [MINER] Reconnecting in 3 seconds...
[2018-Feb-19 20:08:59] [GPU-0 (15 sec)] 0 I/s, 0 Sols/s
[2018-Feb-19 20:08:59] [GPU-1 (15 sec)] 0 I/s, 0 Sols/s
[2018-Feb-19 20:08:59] [GPU-2 (15 sec)] 0 I/s, 0 Sols/s
[2018-Feb-19 20:08:59] [TOTAL (15 sec)] 0 I/s, 0 Sols/s, 0 Accepted, 0 Rejected


You should write    us1-zcash.flypool.org:3443    (you need to specify the ssl port of pool server).
Otherwise the miner can't connect with pool server.
jr. member
Activity: 176
Merit: 1
[2018-Feb-19 20:08:31] [MINER] Using pool: us1-zcash.flypool.org
[2018-Feb-19 20:08:31] [MINER] Starting miner
[2018-Feb-19 20:08:31] [GPU-0] FUNAKOSHI-solver starts mining (device-info: GeForce GTX 1080, version: 6.1, device: 0)
[2018-Feb-19 20:08:32] [GPU-1] FUNAKOSHI-solver starts mining (device-info: GeForce GTX 1080, version: 6.1, device: 1)
[2018-Feb-19 20:08:33] [MINER] Connecting to stratum server us1-zcash.flypool.org:3333
[2018-Feb-19 20:08:33] [GPU-2] FUNAKOSHI-solver starts mining (device-info: GeForce GTX 1080, version: 6.1, device: 2)
[2018-Feb-19 20:08:33] [GPU-0] Temperature: 50, temp-max: 0, temp-min: 0
Power Draw: 41607 milliwatts
[2018-Feb-19 20:08:35] [GPU-1] Temperature: 45, temp-max: 0, temp-min: 0
Power Draw: 43377 milliwatts
[2018-Feb-19 20:08:37] [GPU-2] Temperature: 43, temp-max: 0, temp-min: 0
Power Draw: 45896 milliwatts
[2018-Feb-19 20:08:38] [MINER] wrong version number
[2018-Feb-19 20:08:38] [MINER] Reconnecting in 3 seconds...
[2018-Feb-19 20:08:59] [GPU-0 (15 sec)] 0 I/s, 0 Sols/s
[2018-Feb-19 20:08:59] [GPU-1 (15 sec)] 0 I/s, 0 Sols/s
[2018-Feb-19 20:08:59] [GPU-2 (15 sec)] 0 I/s, 0 Sols/s
[2018-Feb-19 20:08:59] [TOTAL (15 sec)] 0 I/s, 0 Sols/s, 0 Accepted, 0 Rejected
full member
Activity: 226
Merit: 100
Full support for more nVidia miner development!
newbie
Activity: 99
Merit: 0
I will add write to logfile and api in the near future.

When I connect to zcl.surpnova.cc the handshake is immediate and authorize line
is also immediate. I have no idea why it takes so long on your pc.

Connection between Funakoshi-miner and Suprnova has been tested from a few
different computers (some windows, some ubuntu). It works fine.
Handshake with the pool is immediate and smooth.

If handshake and authorize are slow on your pc, then I belive that everything else will also be slow.
newbie
Activity: 25
Merit: 0
now started at first and  took 4 mins till line " Authorised worker..."  internet is fine, another rig works normally, and teamviewer is connected
slowly reads GPU-s and temperatures , as i said will let it go for 24h and then will post results, that should be representative
is there anyway to make logs ?
newbie
Activity: 99
Merit: 0
my ini
funakoshiMiner -cd 0 1 2 -l zcl.suprnova.cc:4142 -u xxxxxxxxxxxx.Rig
I tried to start it almost 20 times,always " not suppoted pool...etc" till at last ....
at a pool side my hashrate is less for about 20% and it  takes 25% CPU more than DSTM or Bminer
handshake with the pool took almost 5min.
I tested it on win10 and 3pc  1070GTX.
is it supported -logfile command ? if is not could be implemented ....

results for 3 hours, and will let it go 24h


I have just connected to zcl.suprnova.cc:4142
It took 1 sec to connect.

Is it possible that your pc has communications problems with the internet?
newbie
Activity: 25
Merit: 0
my ini
funakoshiMiner -cd 0 1 2 -l zcl.suprnova.cc:4142 -u xxxxxxxxxxxx.Rig
I tried to start it almost 20 times,always " not suppoted pool...etc" till at last ....
at a pool side my hashrate is less for about 20% and it  takes 25% CPU more than DSTM or Bminer
handshake with the pool took almost 5min.
I tested it on win10 and 3pc  1070GTX.
is it supported -logfile command ? if is not could be implemented ....

results for 3 hours, and will let it go 24h
newbie
Activity: 62
Merit: 0
I am not saying that dstm has a virus, but:

    https://www.virustotal.com/#/file/39209c0077e1fc42a5f511ac9e81817073a8d4623ebfc57fbec3308f96457316/detection

You should consult Mcafee, Kaspersky, ... (well known and respectable anti-virus providers)
and not unknown anti-virus providers.



sorry this is my fault. I will try the miner.
newbie
Activity: 70
Merit: 0
I have improved the performance of Funakosh-Miner  Cheesy

Now the solver doesn't use much CPU.

As a side-effect there is a jump in solves-rate  Smiley
both on Windows and on Linux.

You are welcome to download the new release and try it.



can you explain, why virustotal find a virus?

https://www.virustotal.com/de/file/4191b32025330aacb7f5bc58c740adbc7012251ce7f5db113d3997eaa3ba4c0d/analysis/1519038341/

A lot of miners get marked due to their excessive consumption of system resources and people using them illegally by putting it on other peoples computers without permission.

...and this has what to do with Funakosh Miner?

Cheers,
Andy


That seriously get lost on you?
newbie
Activity: 99
Merit: 0
I am not saying that dstm has a virus, but:

    https://www.virustotal.com/#/file/39209c0077e1fc42a5f511ac9e81817073a8d4623ebfc57fbec3308f96457316/detection

You should consult Mcafee, Kaspersky, ... (well known and respectable anti-virus providers)
and not unknown anti-virus providers.

newbie
Activity: 99
Merit: 0
There is absolutely no virus.

Mcafee, Avg, Norton, Kaspersky, E-set, F-prot, F-secure, and all other well known anti-viruses don't see a virus.


I don't know what is CrowdStrike Falcon (ML) that says malicious_confidence_70% (D)


Pages:
Jump to: