Funakoshi Cuda miner is fast and clean from viruses (windows, ubuntu, fedora) - page 6.

hopfi2k

newbie

Activity: 48

Merit: 0

Quote from: giveen1 on February 19, 2018, 09:14:10 AM

Quote from: TheMrJ on February 19, 2018, 05:52:12 AM

Quote from: funakoshi on February 19, 2018, 04:21:35 AM

I have improved the performance of Funakosh-Miner Cheesy

Now the solver doesn't use much CPU.

As a side-effect there is a jump in solves-rate

both on Windows and on Linux.

You are welcome to download the new release and try it.

can you explain, why virustotal find a virus?

https://www.virustotal.com/de/file/4191b32025330aacb7f5bc58c740adbc7012251ce7f5db113d3997eaa3ba4c0d/analysis/1519038341/

A lot of miners get marked due to their excessive consumption of system resources and people using them illegally by putting it on other peoples computers without permission.

...and this has what to do with Funakosh Miner?

Cheers,
Andy

giveen1

newbie

Activity: 70

Merit: 0

Quote from: TheMrJ on February 19, 2018, 05:52:12 AM

Quote from: funakoshi on February 19, 2018, 04:21:35 AM

I have improved the performance of Funakosh-Miner Cheesy

Now the solver doesn't use much CPU.

As a side-effect there is a jump in solves-rate

both on Windows and on Linux.

You are welcome to download the new release and try it.

can you explain, why virustotal find a virus?

https://www.virustotal.com/de/file/4191b32025330aacb7f5bc58c740adbc7012251ce7f5db113d3997eaa3ba4c0d/analysis/1519038341/

A lot of miners get marked due to their excessive consumption of system resources and people using them illegally by putting it on other peoples computers without permission.

TheMrJ

newbie

Activity: 62

Merit: 0

Quote from: funakoshi on February 19, 2018, 04:21:35 AM

I have improved the performance of Funakosh-Miner Cheesy

Now the solver doesn't use much CPU.

As a side-effect there is a jump in solves-rate

both on Windows and on Linux.

You are welcome to download the new release and try it.

can you explain, why virustotal find a virus?

https://www.virustotal.com/de/file/4191b32025330aacb7f5bc58c740adbc7012251ce7f5db113d3997eaa3ba4c0d/analysis/1519038341/

funakoshi

newbie

Activity: 99

Merit: 0

I have improved the performance of Funakosh-Miner Cheesy

Now the solver doesn't use much CPU.

As a side-effect there is a jump in solves-rate

both on Windows and on Linux.

You are welcome to download the new release and try it.

boo50

sr. member

Activity: 472

Merit: 250

lux8.net

added support to Nibirupool (ssl ports) and .bat examples for easy miners setup.

hopfi2k

newbie

Activity: 48

Merit: 0

Quote from: funakoshi on February 15, 2018, 11:23:14 PM

Thanks Andy

You are very kind.

I will improve the performance of my solver.

Funakoshi (if this is your name?),

If you find ways to improve it - please go for it!
I really think competition between different miners is a good thing. Furthermore I believe that dev fee is something totally acceptable - if the dev fee is worth the performance and stability. The market is big enough and great and reliable miners will always find plenty of rigs to mine on.
Finally I wouldn't focus too much on Windows. No serious miner (with more than really small number of rigs) will use Windows, because its hell to maintain and never stable as a Linux system...

Cheers,
Andy

funakoshi

newbie

Activity: 99

Merit: 0

Thanks Andy

You are very kind.

I will improve the performance of my solver.

giveen1

newbie

Activity: 70

Merit: 0

Quote from: hopfi2k on February 15, 2018, 05:19:55 PM

Hi,

some early reports from my testing concerning mining speed:
(linux, 1 x 1070ti):

Funakoshi:
Miner: 350-410 Sol/s
Flypool: 437 H/s (6+ hours)
0 stale shares, 0 invalid shares
CPU use: 90%

DSTM 0.5.7:
Miner: 490-495 Sol/s
Flypool: 485 H/s
0 stale shares, 0 invalid shares
CPU use: 6,5%

Good thing: Funakoshi is running rock solid (as DSTM is)
So, even at the pool side I don't see any benefit from use Funakoshi.
While I appreciate other miners and competition, I looks (at least from
these early results), that it still needs some work ;-)
Anyhow, first results are promising, and you may find some ways of
squeezing some more Sol/s out of your miner!
Maybe you want to consider a 0% dev fee until you reach a performance
level that is more closer to the competitors?

Cheers,
Andy

Thank you.

hopfi2k

newbie

Activity: 48

Merit: 0

Hi,

some early reports from my testing concerning mining speed:
(linux, 1 x 1070ti):

Funakoshi:
Miner: 350-410 Sol/s
Flypool: 437 H/s (6+ hours)
0 stale shares, 0 invalid shares
CPU use: 90%

DSTM 0.5.7:
Miner: 490-495 Sol/s
Flypool: 485 H/s
0 stale shares, 0 invalid shares
CPU use: 6,5%

Good thing: Funakoshi is running rock solid (as DSTM is)
So, even at the pool side I don't see any benefit from use Funakoshi.
While I appreciate other miners and competition, I looks (at least from
these early results), that it still needs some work ;-)
Anyhow, first results are promising, and you may find some ways of
squeezing some more Sol/s out of your miner!
Maybe you want to consider a 0% dev fee until you reach a performance
level that is more closer to the competitors?

Cheers,
Andy

hopfi2k

newbie

Activity: 48

Merit: 0

Quote from: funakoshi on February 14, 2018, 09:52:05 AM

Hi Andy

I have tested flypool from Ubuntu.

However I used:
./funakoshiMiner -cd 0 -l eu1-zcash.flypool.org:3443 -u xxxxxxxx.rig0

Please use ssl port 3443

In the log you can see that connecting to wrong port 3334 has failed.

No need to sudo.

Thanks Andy

Hi,

I'm such a fool - a little typo in the port number and I'm blame your miner not working.
Please apologize, that was totally my fault.
Miner is running and reporting around 380-412 Sol/s, while DSTM was reporting like 490-495 Sol/s.
Let's wait and see in a few hours what Flypool is reporting ;-)

Thanks a lot!

Cheers,
Andy

funakoshi

newbie

Activity: 99

Merit: 0

Quote from: restless on February 14, 2018, 01:03:57 PM

Tested on lowend machine - E2180 4gb ram, 2*1070Ti, Win7, driver 390
makes ~ 700 h/s, vs 960h/s from dstm 0.5.8
Could be due to higher cpu usage, 40-50% vs 20-35% of dstm

The sol/s change all the time.

Each 15 secs different counters are logged.
Some of them higher and some lower.

This is due to the statistical nature of the equihash algo.

How did you choose 700 sol/s. Is it the lowest/highest/avarage?

Funakoshi miner reports each 15 secs the exact avarage in these 15 secs.
The sol/s normaly change each 15 secs (in range of tens per sec per device).

Miners should check what the pool says after a few hours of mining.
Let the pool decide which miner is faster. Miners get their fee from the pool.

restless

legendary

Activity: 1151

Merit: 1001

Tested on lowend machine - E2180 4gb ram, 2*1070Ti, Win7, driver 390
makes ~ 700 h/s, vs 960h/s from dstm 0.5.8
Could be due to higher cpu usage, 40-50% vs 20-35% of dstm

funakoshi

newbie

Activity: 99

Merit: 0

Hi Andy

I have tested flypool from Ubuntu.

However I used:
./funakoshiMiner -cd 0 -l eu1-zcash.flypool.org:3443 -u xxxxxxxx.rig0

Please use ssl port 3443

In the log you can see that connecting to wrong port 3334 has failed.

No need to sudo.

Thanks Andy

hopfi2k

newbie

Activity: 48

Merit: 0

Quote from: funakoshi on February 13, 2018, 11:33:49 PM

Quote from: hopfi2k on February 13, 2018, 04:12:34 PM

Hi,

trying with 1070ti on Zcash (flypool), but only getting:

Code:

[TOTAL (15 sec)] 0 I/s, 0 Sol/s, 0 Accepted, 0 Rejected

Some machine is working flawless with DTMS, EWBF etc.
Running on Ubuntu...

Any ideas?

Cheers,
Andy

Btw. How to exit from the miner? (currently need to kill -9 ...)

The command-line argument -cd 0 requests to mine using first nvidia card.
See the usage example in the github.

To mine using 2 cards you should pass the arg -cd 0 1

If you don't pass -cd (cuda device) arg, you will get 0 sols.

Soon I will add api support.

Have been running it with the following command:

Code:

sudo ./funakoshiMiner -cd 0 -l eu1-zcash.flypool.org:3334 -u xxxxxxx.rig

That still produces 0 Sol...

Anything else I can do?

Cheers,
Andy

funakoshi

newbie

Activity: 99

Merit: 0

Quote from: funakoshi on February 14, 2018, 12:44:20 AM

Quote from: ylpkm2 on February 13, 2018, 11:56:11 PM

needs more work 4 1080ti's getting 2580 h/s. ebwf gets about 3000 at same settings. This miner also uses quite a bit of cpu resources.

Let the pool decide which solver is faster.
Check what the pool says after a few hours of running.
funakoshi should be faster.

Also ignore the first report of counters.
It is lower due to handshake with the pool.

funakoshi

newbie

Activity: 99

Merit: 0

Quote from: ylpkm2 on February 13, 2018, 11:56:11 PM

needs more work 4 1080ti's getting 2580 h/s. ebwf gets about 3000 at same settings. This miner also uses quite a bit of cpu resources.

Let the pool decide which solver is faster.
Check what the pool says after a few hours of running.
funakoshi should be faster.

ylpkm2

newbie

Activity: 39

Merit: 0

needs more work 4 1080ti's getting 2580 h/s. ebwf gets about 3000 at same settings. This miner also uses quite a bit of cpu resources.

funakoshi

newbie

Activity: 99

Merit: 0

Quote from: giveen1 on February 13, 2018, 03:06:19 PM

Why yours compared to any others around here?

funakoshiMiner is virus-free. No trojan. This is very important.
It uses SSL (secured).
It is fast.

funakoshi

newbie

Activity: 99

Merit: 0

Quote from: hopfi2k on February 13, 2018, 04:12:34 PM

Hi,

trying with 1070ti on Zcash (flypool), but only getting:

Code:

[TOTAL (15 sec)] 0 I/s, 0 Sol/s, 0 Accepted, 0 Rejected

Some machine is working flawless with DTMS, EWBF etc.
Running on Ubuntu...

Any ideas?

Cheers,
Andy

Btw. How to exit from the miner? (currently need to kill -9 ...)

The command-line argument -cd 0 requests to mine using first nvidia card.
See the usage example in the github.

To mine using 2 cards you should pass the arg -cd 0 1

If you don't pass -cd (cuda device) arg, you will get 0 sols.

Soon I will add api support.

Bimmber

newbie

Activity: 210

Merit: 0

Anybody knows how to install this miner on eth os ?

Topic: Funakoshi Cuda miner is fast and clean from viruses (windows, ubuntu, fedora) - page 6. (Read 2421 times)