Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 111.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: PrometherioN on December 18, 2017, 04:05:46 AM

Quote from: UnclWish on December 17, 2017, 03:05:57 PM

Quote from: PrometherioN on December 17, 2017, 12:45:18 PM

Hello,

I'm new to Gateless gate - is there any way to mine VIVO (neoscrypt) on gtx 1070? how config file should look like?

Yes, with GGS you can mine any neoscrypt coin. Gatelessgate not supported. You can use GatelessGate Sharp. No config file - all settings in program.

thx for the answer i have problems with settings i would like to mine VIVO on https://www.altminer.net on settings in gatelesgate i have to provide:

Host
Login
Port
Password

my settings on ccminer look like:

ccminer-x64.exe -a neoscrypt -o stratum+tcp://eu1.altminer.net:10001 -u -p c=VIVO

I have tried to config gatelesgate

Host: stratum+tcp://eu1.altminer.net
Login:
Port: 10001
Password:

but that doesn't work

Anyone have an idea on how it should look like?

This should work:

Host: eu1.altminer.net
Login:
Port: 10001
Password: c=VIVO

SirOverdose

newbie

Activity: 13

Merit: 0

Thankyou

I would find the ability to turn off cards separately useful, which would make it easier to determine which card is which when using 3rd party overclocking tools, which order the cards differently. or maybe a device id, ADL id etc display?

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: SirOverdose on December 18, 2017, 04:37:40 AM

I have more than 8 cards (rx480) running on the latest drivers, GGS only shows 8, in the log it shows the full number of cards, will more cards be supported in the future?

will temp monitoring etc for the 17.12.1 drivers be added?

Thankyou Zawawa

I will fix this problem as soon as I get back to the States later this week.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: zawawa on December 17, 2017, 09:24:30 PM

Quote from: UnclWish on December 17, 2017, 12:09:12 PM

Quote from: goodb on December 17, 2017, 11:21:13 AM

Code:

] Gateless Gate Sharp 1.1.5 alpha started.
2017-12-17 17:00:18.1548 [1] Number of Devices: 7
2017-12-17 17:00:18.2423 [1] Successfully initialized AMD Display Library.
2017-12-17 17:00:18.2423 [1] Number of ADL Adapters: 112
2017-12-17 17:00:18.2423 [1] ADL_Adapter_AdapterInfo_Get() returned error code -3

Dear Mr. zawawa , I am getting this error , and I think because of that all overclock/speed/mhz area is disabled by me ..Any idea ?.
I dont have afterburner installed..Just latest(est) AMD driver 17.11.4 with compute..Fresh installed win10x64..

I allways has this error. I don't think it's important...

zawawa, can you add support for cryptonight-lite (AEON)?

I would implement it in a heartbeat if you leave the DEVFEE on. Wink

Why do you think that I'm disable it? ))

SirOverdose

newbie

Activity: 13

Merit: 0

I have more than 8 cards (rx480) running on the latest drivers, GGS only shows 8, in the log it shows the full number of cards, will more cards be supported in the future?

will temp monitoring etc for the 17.12.1 drivers be added?

Thankyou Zawawa

PrometherioN

jr. member

Activity: 48

Merit: 1

Quote from: UnclWish on December 17, 2017, 03:05:57 PM

Quote from: PrometherioN on December 17, 2017, 12:45:18 PM

Hello,

I'm new to Gateless gate - is there any way to mine VIVO (neoscrypt) on gtx 1070? how config file should look like?

Yes, with GGS you can mine any neoscrypt coin. Gatelessgate not supported. You can use GatelessGate Sharp. No config file - all settings in program.

thx for the answer i have problems with settings i would like to mine VIVO on https://www.altminer.net on settings in gatelesgate i have to provide:

Host
Login
Port
Password

my settings on ccminer look like:

ccminer-x64.exe -a neoscrypt -o stratum+tcp://eu1.altminer.net:10001 -u -p c=VIVO

I have tried to config gatelesgate

Host: stratum+tcp://eu1.altminer.net
Login:
Port: 10001
Password:

but that doesn't work

Anyone have an idea on how it should look like?

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: UnclWish on December 17, 2017, 12:09:12 PM

Quote from: goodb on December 17, 2017, 11:21:13 AM

Code:

] Gateless Gate Sharp 1.1.5 alpha started.
2017-12-17 17:00:18.1548 [1] Number of Devices: 7
2017-12-17 17:00:18.2423 [1] Successfully initialized AMD Display Library.
2017-12-17 17:00:18.2423 [1] Number of ADL Adapters: 112
2017-12-17 17:00:18.2423 [1] ADL_Adapter_AdapterInfo_Get() returned error code -3

Dear Mr. zawawa , I am getting this error , and I think because of that all overclock/speed/mhz area is disabled by me ..Any idea ?.
I dont have afterburner installed..Just latest(est) AMD driver 17.11.4 with compute..Fresh installed win10x64..

I allways has this error. I don't think it's important...

zawawa, can you add support for cryptonight-lite (AEON)?

I would implement it in a heartbeat if you leave the DEVFEE on. Wink

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: stash2coin on December 17, 2017, 07:03:43 AM

Quote from: zawawa on December 17, 2017, 05:58:11 AM

Quote from: sir_blacks on December 13, 2017, 01:14:52 PM

Quote from: UnclWish on December 13, 2017, 12:48:20 PM

zawawa, with adding neoscrypt please take a look on cryptonight-lite. Maybe it didn't need much time to add them...

i will say it will be great to see add equihash + neoscrypt & lyra2rev2 in future

thx

lyra2rev2 is coming very soon. Equihash, I'm not so sure.

Equihash will be good if you make it for AMD cards , currently only claymore provide good speed for equihash on AMD cards.

I will tackle Equihash after Lyra2REv2, then.

goodb

newbie

Activity: 126

Merit: 0

Quote from: UnclWish on December 17, 2017, 04:16:24 PM

Hardware controls for GPUs are not implemented yet by developer. Will be added later.
Sensors didn't work because of you probably updated to 17.12.1 driver. On 17.11.4 sensors for 480/580 works.

I dont want to stuff all the page , with my problem but, I am using 17.11.4 drivers definitely.Here is the screen cap of drivers :
https://pasteboard.co/GYHiGFA.jpg.

Maybe OP, can answer and solve my problem..But thank you anyway..

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: goodb on December 17, 2017, 03:21:43 PM

Quote from: UnclWish on December 17, 2017, 12:09:12 PM

Quote from: goodb on December 17, 2017, 11:21:13 AM

Code:

] Gateless Gate Sharp 1.1.5 alpha started.
2017-12-17 17:00:18.1548 [1] Number of Devices: 7
2017-12-17 17:00:18.2423 [1] Successfully initialized AMD Display Library.
2017-12-17 17:00:18.2423 [1] Number of ADL Adapters: 112
2017-12-17 17:00:18.2423 [1] ADL_Adapter_AdapterInfo_Get() returned error code -3

Dear Mr. zawawa , I am getting this error , and I think because of that all overclock/speed/mhz area is disabled by me ..Any idea ?.
I dont have afterburner installed..Just latest(est) AMD driver 17.11.4 with compute..Fresh installed win10x64..

I allways has this error. I don't think it's important...

zawawa, can you add support for cryptonight-lite (AEON)?

This is my problem , I am thinking it is about ADL to do .Somehow it can not take the control (of wattman) from AMD software...Any help is appreciated..

Hardware controls for GPUs are not implemented yet by developer. Will be added later.
Sensors didn't work because of you probably updated to 17.12.1 driver. On 17.11.4 sensors for 480/580 works.

zawawa, bug with AMD SDK installed and GGS finds more adapters than exists is still here? I'm installed AMD SDK again and GGS finds 6 GPUs insteed of my 3.
Is there is some hook to not uninstall AMD SDK and GGS show GPUs right?

goodb

newbie

Activity: 126

Merit: 0

Quote from: UnclWish on December 17, 2017, 12:09:12 PM

Quote from: goodb on December 17, 2017, 11:21:13 AM

Code:

] Gateless Gate Sharp 1.1.5 alpha started.
2017-12-17 17:00:18.1548 [1] Number of Devices: 7
2017-12-17 17:00:18.2423 [1] Successfully initialized AMD Display Library.
2017-12-17 17:00:18.2423 [1] Number of ADL Adapters: 112
2017-12-17 17:00:18.2423 [1] ADL_Adapter_AdapterInfo_Get() returned error code -3

Dear Mr. zawawa , I am getting this error , and I think because of that all overclock/speed/mhz area is disabled by me ..Any idea ?.
I dont have afterburner installed..Just latest(est) AMD driver 17.11.4 with compute..Fresh installed win10x64..

I allways has this error. I don't think it's important...

zawawa, can you add support for cryptonight-lite (AEON)?

https://pasteboard.co/GYFQ96i.jpg

This is my problem , I am thinking it is about ADL to do .Somehow it can not take the control (of wattman) from AMD software...Any help is appreciated..

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: PrometherioN on December 17, 2017, 12:45:18 PM

Hello,

I'm new to Gateless gate - is there any way to mine VIVO (neoscrypt) on gtx 1070? how config file should look like?

Yes, with GGS you can mine any neoscrypt coin. Gatelessgate not supported. You can use GatelessGate Sharp. No config file - all settings in program.

joaocha

full member

Activity: 254

Merit: 100

Linux version and command line would be nice to start thinking about (most of users use simplemining os, or something like it)

PrometherioN

jr. member

Activity: 48

Merit: 1

Hello,

I'm new to Gateless gate - is there any way to mine VIVO (neoscrypt) on gtx 1070? how config file should look like?

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: goodb on December 17, 2017, 11:21:13 AM

Code:

] Gateless Gate Sharp 1.1.5 alpha started.
2017-12-17 17:00:18.1548 [1] Number of Devices: 7
2017-12-17 17:00:18.2423 [1] Successfully initialized AMD Display Library.
2017-12-17 17:00:18.2423 [1] Number of ADL Adapters: 112
2017-12-17 17:00:18.2423 [1] ADL_Adapter_AdapterInfo_Get() returned error code -3

Dear Mr. zawawa , I am getting this error , and I think because of that all overclock/speed/mhz area is disabled by me ..Any idea ?.
I dont have afterburner installed..Just latest(est) AMD driver 17.11.4 with compute..Fresh installed win10x64..

I allways has this error. I don't think it's important...

zawawa, can you add support for cryptonight-lite (AEON)?

goodb

newbie

Activity: 126

Merit: 0

Code:

] Gateless Gate Sharp 1.1.5 alpha started.
2017-12-17 17:00:18.1548 [1] Number of Devices: 7
2017-12-17 17:00:18.2423 [1] Successfully initialized AMD Display Library.
2017-12-17 17:00:18.2423 [1] Number of ADL Adapters: 112
2017-12-17 17:00:18.2423 [1] ADL_Adapter_AdapterInfo_Get() returned error code -3

Dear Mr. zawawa , I am getting this error , and I think because of that all overclock/speed/mhz area is disabled by me ..Any idea ?.
I dont have afterburner installed..Just latest(est) AMD driver 17.11.4 with compute..Fresh installed win10x64..

totallyG

newbie

Activity: 34

Merit: 0

Quote from: zawawa on December 16, 2017, 09:19:09 PM

I should probably emphasize here that I absolutely need the DEVFEE to continue the project.
This is NOT a hobby project, and I just cannot afford to lose thousands of dollars every month.

I will gladly pay the devfee as long as its reasonable.

Wishlist: Support for OpenCl 1.2 devices such as older AMD cards and Intel GPUs.
Intel GPUs reminds of AMD GCN but only 8 ALUs instead of 64 per CU.
So for intel HD4000 the config is 2:16:128
Probably the system DDR3 will limit the performance. The intel GPUs only have 256kB fast cache per block, but can also use the CPUs L3 or eRAM if intel Iris.

goodb

newbie

Activity: 126

Merit: 0

Quote from: zawawa on December 16, 2017, 07:49:25 PM

Gateless Gate Sharp 1.1.5 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.1.5-alpha

* Add support for NeoScrypt.
* Various bug fixes and improvements.

I am still out of town and was able to do only a fairly limited amount of testing.
Please let me know if anything,

Mr. zawawa, it is a great work.. I am so sad that I didnt see such a good project earlier...I am now mining with your program (2x580 +5x480 8gb)..it is still some lower (195 mhs at ethermine with modded bioses) than Claymore, but, I dont care ATM..

Could you please tell us, some fine tuning possibilites , especially for RX 4/5 series (i think it would be interest many miners too), Coreclock and memory clock on the fly (and all clock speeds on dashboard view) are disabled (passive)? ..It would be wonderfull to be able to change coreclok +memclock + vddc settings inside the program /on the fly, for best optimization..(Now I am starting claymore bat to set all frequencies+voltages ---then close it-->finally run gateless Gate Sharp Sad

)...

Thank you again for this great work..!

stash2coin

jr. member

Activity: 108

Merit: 1

Quote from: zawawa on December 17, 2017, 05:58:11 AM

Quote from: sir_blacks on December 13, 2017, 01:14:52 PM

Quote from: UnclWish on December 13, 2017, 12:48:20 PM

zawawa, with adding neoscrypt please take a look on cryptonight-lite. Maybe it didn't need much time to add them...

i will say it will be great to see add equihash + neoscrypt & lyra2rev2 in future

thx

lyra2rev2 is coming very soon. Equihash, I'm not so sure.

Equihash will be good if you make it for AMD cards , currently only claymore provide good speed for equihash on AMD cards.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: sir_blacks on December 13, 2017, 01:14:52 PM

Quote from: UnclWish on December 13, 2017, 12:48:20 PM

zawawa, with adding neoscrypt please take a look on cryptonight-lite. Maybe it didn't need much time to add them...

i will say it will be great to see add equihash + neoscrypt & lyra2rev2 in future

thx

lyra2rev2 is coming very soon. Equihash, I'm not so sure.

Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 111. (Read 214431 times)