Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 130. (Read 214431 times)

Just checked the new version, and same issue there: miner shuts down after switching from mining devfee (cryptonite on nicehash). This happen on all my rigs. It only works if I leave a few GPU’s unchecked on main screen. On my tests it only works on up to 5-GPU’s. 6,7,8-GPU configuration doesn’t works.
Tested on 5 rigs with AMD RX480/RX580/RX570 using blockchain beta drivers, and crimson 17.7.2 drivers, but same miner behavior, it just limit you to up to 5-GPUs on Cryptonite algo. Seems that Ethereum on Nicehash pool has no this issue – all GPU’s are usable

Thanks for new version, miner still closes on devfee with 17.11.1
DDU'ed 17.11.1 in safe mode and installed Blockchain Aug 23 and tried with stock settings(1150/1750 RX580 \ 1100/1750 all RX570).
Mines DevFee than close/exit if miner tries to switch to pool(nicehash). 

Thanks! Let's try it now! Hope you will continue to develope GGS...

P.S. I think that problem with 570 and 470 is because they have 4Gb memory. With 32 globalworksize miner use more than 4Gb videomemory. So if 480 or 580 will have 4Gb vmemory GGS will fail to start. You must set globalworksize not only for name of GPU but it's need to determine size of vmemory and if it 8Gb than set to 32 if 4Gb than 28. I don't have 470/570 to test optimal size of globalwork. But 470/570 have 32 CU isn't it. So 28*32 = 896. 4Gb will be enough I think. 16 too low even for 4Gb.

P.P.S. It's a misspelling in main window: "Currenr Algorithm". Must be "Current" I think. And it not shows anything while mining monero. And nicehash info didn't work still. And avarage speeds for last 1min/1hour/all time from start will be much useful.
In log no time stamp and still stay periodical error:

Exception: Bxoднaя cтpoкa имeлa нeвepный фopмaт.   в System.Number.ParseDouble(String value, NumberStyles options, NumberFormatInfo numfmt)
   в GatelessGateSharp.MainForm.UpdateStatsWithLongPolling()

In MainForm.cs you forgot to change version from 0.0.6 to 0.0.7 therefore in main window showed version 0.0.6 alpha.

I just uploaded a new version with a fix for this issue.

https://github.com/zawawawa/GatelessGateSharp/releases/tag/v0.0.7-alpha

It also displays the elapsed time and has check boxes for enabling/disabling devices. Enjoy!

Check, is this file exist in installation folder. It must be there.

Not working
Message shown Unable to load DLL 'SQLite.Interop.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
GGS 0.0.4-0.0.6 the same trouble.
Win 10  x64

Thanks. 

RX570 4GB must be it. I will make adjustments.

It's amazing! I slow down overclocking from 1425/2250 (I use these clocks for Claymore's 10.2) to 1250/2250 but speed stays the same! And it still about 1-2% more than Claymore's 10.2 with overclocking! And about 3% more than Claymore's 10.2 without overclocking.
Furthermore, during GGS mining cryptonight I can comfort play middle range games and play videos. With Claymore's 10.2 video playback is freezing, and games with lags in 3d graphics!
Therefore GGS is more power effective and comfortable!
Great job, zawawa! You're the best!

P.S. It's need to add GPU enabling/disabling for mining. And possibility to run via command line at least different config files. Overclocking options needed too. And dual modes for ethereum.
Sorry for so many wishes. But your GGS miner best of all. I don't like Claymore's miners and waiting to full replacing his miners to your GGS.

P.P.S. I think in log it's time stamp needed. And timer in main window so as average speed.

P.P.P.S. It's strange but my 1st card have shares in 2 times more than 2nd card, but speed of 1st card is slower about 10% (different 580 cards).
And in 0.0.6 bug with rejected shares after receiving job stays:
Received new job: 00000026d39174c8
Device #0: 422,72 h/s
Device #0 submitted a share.
Share rejected: Job not found.

Thanks for update!

Version 0.0.6 on periodically in log shows:

Exception: Bxoднaя cтpoкa имeлa нeвepный фopмaт.   в System.Number.ParseDouble(String value, NumberStyles options, NumberFormatInfo numfmt)
   в GatelessGateSharp.MainForm.UpdateCurrencyStats()

Nicehash profits and balance still didn't work. RigID don't showed in nicehash statistics as worker name.


Version 0.0.5 I found a bug:
If share founded right after receiving new job it's rejected. Here examples of 2 variants of errors showed:

Received new job: 000000294adc7bd9
Device #0 submitted a share.
Share rejected: Job not found.

Received new job: 00000026cbed363a
Device #0 submitted a share.
Share rejected: Invalid nonce; is miner not compatible with NiceHash?

Now testing 0.0.6.

Just installed new Version and miner shuts down after mining devfee?

Currently using Win10+FCU+17.11.1 driver, Asrock H81 with 2xRX580 4GB 2x RX570 4GB 1xRX570 8GB.

Do i need to reset claymore oc settings or use a different driver?

I just uploaded a new version with bug fixes.

can u make it possibe to edit pools?

And add an 580 to globalwork table. This is 480 exists, but 580 isn't.
Nicehash still didn't show profits and balance...

Oops. I’ll fix it later tonight.

Thanks for auto-start!
You changed localworksize to 4 and globalworksize to 16*CU for all cards equal... For compatibility I think? Because it gives less speed than it was before...

P.S. I succeeded to start 0.0.5 with localwork 8 and globalwork 32*36 = 1152 on my RX 580 8Gb and now speed more than Claymore 10.2! About 1-1,5% more!
You must made this parameters tuneable in program!

Gateless Gate Sharp 0.0.5 alpha

https://github.com/zawawawa/GatelessGateSharp/releases/tag/v0.0.5-alpha

* Add Monero mining.
* Various improvements and bug fixes.

User experience has improved significantly with this version. Enjoy!

- Tried RX 580 8Gb with globalworksize 30x36 = 1080 instead 28x36 = 1008. Recieved slightly increased speed about 0.5%. But it can be GPU individaully... With 32x36 GSS dropped with error so as with localworksize 10 and 12 instead standart 8. Although GSS with 1 thread works with more variants of local and global work sizes. I think cause of this is implementation of 2 threads. GG works more stable with 2 GPU threads...
- What about power consumtion? Is it the same as in GG?
- What about overclocking cards? Simle core/memory clocks and vddc may be added?
- I think that its needed possibility to select GPUs for mining.
- And please add command line start possibility.

P.S. Often (1-2 an hour) rejected shares appers with this in log:
Device #0 submitted a share.
Share rejected: Job not found.

What is the reason of this? On Claymore miner all founded shares are normal...

Our API server must be slow. I will add the auto-start feature now.

Tried new 2-threaded version. It works! Only several hashs per second less then Claymore 10.2. I think that you must add an Avarage Speed parameter. Nicehash still don't show profits and balance.
Can you add possibilty to add more GPU threads for cryptonight? On GG i used 3 threads per GPU on RX 580 8Gb.
Can GGS be launched by command line via bat-file? How autostart mining after launching program?