Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 182.

jstefanop

legendary

Activity: 2174

Merit: 1401

Quote from: zawawa on January 16, 2017, 08:09:27 PM

Quote from: nerdralph on January 16, 2017, 07:57:17 PM

Quote from: zawawa on January 16, 2017, 05:16:37 PM

So Sir. Claymore seems to have given up at 260 sol/s on RX 480.
My experiments are going well, so this target is totally doable, methinks.

And if Optiminer is still taking a 10% dev fee then 265/.9 = 294 sols/s gross speed.

That seems like a real challenge for me.
I must admit that there is a little sadistic guilty pleasure in cutting down somebody else's big money tree, but I'm only a human...

Well he's so damn greedy and his dev fee so ridiculous you only need to reach 266 before everyone dumps his miner Wink

I just can't wait until both him and claymore learn their lessons the hard way. You don't get to to rip off and screw over the people in this OPEN SOURCE community, and bite the hand that feeds you and not get bitten in the ass eventually.

zawawa here is .1 btc for about the only noble open source miner dev efforts I have seen on here in a while...good to see there are still people on here that get what this whole movement is about Grin

https://btc.blockr.io/tx/info/e8a2a8f60c50b285e18ebb381bf1be57f629924449ffce10a12f5c9005937c74

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: nerdralph on January 16, 2017, 07:57:17 PM

Quote from: zawawa on January 16, 2017, 05:16:37 PM

So Sir. Claymore seems to have given up at 260 sol/s on RX 480.
My experiments are going well, so this target is totally doable, methinks.

And if Optiminer is still taking a 10% dev fee then 265/.9 = 294 sols/s gross speed.

That seems like a real challenge for me.
I must admit that there is a little sadistic guilty pleasure in cutting down somebody else's big money tree, but I'm only a human...

nerdralph

sr. member

Activity: 588

Merit: 251

Quote from: zawawa on January 16, 2017, 05:16:37 PM

So Sir. Claymore seems to have given up at 260 sol/s on RX 480.
My experiments are going well, so this target is totally doable, methinks.

And if Optiminer is still taking a 10% dev fee then 265/.9 = 294 sols/s gross speed.

nerdralph

sr. member

Activity: 588

Merit: 251

Quote from: jstefanop on January 16, 2017, 07:51:33 PM

Quote from: nerdralph on January 16, 2017, 07:38:03 PM

Quote from: zawawa on January 16, 2017, 05:16:37 PM

So Sir. Claymore seems to have given up at 260 sol/s on RX 480.
My experiments are going well, so this target is totally doable, methinks.

9 rounds takes ~1.2GB of external memory bandwidth when you use GDS for the row counters. The Rx 480 has 256GB/s of theoretical bandwidth, but even with copied straps, you won't get much more than 200GB/s. 200/1.2 = 166.7 itterations per section, * 1.87 sols/i =~ 312 sols/s. You'll probably have to experiment with SLC and/or GLC memory IO in order to get over 275 sols.

Keep up the good work guys...seems like Claymore has once again screwed over linux users, so I will keep donating here and hopefully we can all switch over to this open source miner soon.

Yeah, he got his panties all in a bunch after I posted how easy it was to dump his kernel code, and Wolf explained how he extracted the miner ELF binaries. The silly thing is I only did it for fun as I already knew v10 was too slow to be using any asm tricks, so there was no big performance secrets to learn.

jstefanop

legendary

Activity: 2174

Merit: 1401

Quote from: nerdralph on January 16, 2017, 07:38:03 PM

Quote from: zawawa on January 16, 2017, 05:16:37 PM

So Sir. Claymore seems to have given up at 260 sol/s on RX 480.
My experiments are going well, so this target is totally doable, methinks.

9 rounds takes ~1.2GB of external memory bandwidth when you use GDS for the row counters. The Rx 480 has 256GB/s of theoretical bandwidth, but even with copied straps, you won't get much more than 200GB/s. 200/1.2 = 166.7 itterations per section, * 1.87 sols/i =~ 312 sols/s. You'll probably have to experiment with SLC and/or GLC memory IO in order to get over 275 sols.

Keep up the good work guys...seems like Claymore has once again screwed over linux users, so I will keep donating here and hopefully we can all switch over to this open source miner soon.

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: zawawa on January 16, 2017, 04:39:14 PM

Quote from: joaocha on January 16, 2017, 04:32:55 PM

Quote from: zawawa on January 16, 2017, 04:26:28 PM

Ethereum mining for AMD cards is working now, too.
The fixes will be included in the next version.

Please add some kind of monitor support s2

Awesome Miner should work with Gateless Gate. If not, please let me know.

AWESOME Miner does i got it working .

nerdralph

sr. member

Activity: 588

Merit: 251

Quote from: zawawa on January 16, 2017, 05:16:37 PM

So Sir. Claymore seems to have given up at 260 sol/s on RX 480.
My experiments are going well, so this target is totally doable, methinks.

9 rounds takes ~1.2GB of external memory bandwidth when you use GDS for the row counters. The Rx 480 has 256GB/s of theoretical bandwidth, but even with copied straps, you won't get much more than 200GB/s. 200/1.2 = 166.7 itterations per section, * 1.87 sols/i =~ 312 sols/s. You'll probably have to experiment with SLC and/or GLC memory IO in order to get over 275 sols.

p.s. Claymore and Optiminer are doing it the messy way with dozens of different pre-built kernels. One kernel per ISA is the most you should need. With ROCm/OpenCL it looks like the same conventions are used for argument passing for GCN1.1 and 1.2, so a single combined kernel for both may be possible.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: FFI2013 on January 16, 2017, 07:12:41 PM

Quote from: zawawa on January 16, 2017, 04:06:39 PM

I was able to fix Monero. Still trying to get ETH working...

awesome I like having the ability to switch coins without having to have 5 different miners to switch also a little while back there was multiminer which was a multi os app with the ability to monitor multi devices and coins with coinwars and whattomine api built in the dev stopped updating it but it works perfect with sgminer and can switch coins on the fly if you have time check it out multiminerapp.com and https://github.com/nwoolls/MultiMiner/releases

Looks very sleek. Thanks for the info.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: laik2 on January 16, 2017, 06:05:09 PM

You should stick with CUDA for NVIDIA cards, this is the proper way to go.

I was to switch to CUDA, but it turned out that OpenCL was not a limiting factor as far as performance is concerned, which is all I care about.

FFI2013

hero member

Activity: 906

Merit: 507

Quote from: zawawa on January 16, 2017, 04:06:39 PM

I was able to fix Monero. Still trying to get ETH working...

awesome I like having the ability to switch coins without having to have 5 different miners to switch also a little while back there was multiminer which was a multi os app with the ability to monitor multi devices and coins with coinwars and whattomine api built in the dev stopped updating it but it works perfect with sgminer and can switch coins on the fly if you have time check it out multiminerapp.com and https://github.com/nwoolls/MultiMiner/releases

laik2

sr. member

Activity: 652

Merit: 266

You should stick with CUDA for NVIDIA cards, this is the proper way to go.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

So Sir. Claymore seems to have given up at 260 sol/s on RX 480.
My experiments are going well, so this target is totally doable, methinks.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: joaocha on January 16, 2017, 04:32:55 PM

Quote from: zawawa on January 16, 2017, 04:26:28 PM

Ethereum mining for AMD cards is working now, too.
The fixes will be included in the next version.

Please add some kind of monitor support s2

Awesome Miner should work with Gateless Gate. If not, please let me know.

joaocha

full member

Activity: 254

Merit: 100

Quote from: zawawa on January 16, 2017, 04:26:28 PM

Ethereum mining for AMD cards is working now, too.
The fixes will be included in the next version.

Please add some kind of monitor support s2

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Ethereum mining for AMD cards is working now, too.
The fixes will be included in the next version.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

I was able to fix Monero. Still trying to get ETH working...

toptek

legendary

Activity: 1274

Merit: 1000

got my 480 doing 215 a tad over clocked default bios, cm11 does 250 at stock setting not over clock fee on. fee off 236

so it's close..

Za1n

legendary

Activity: 1078

Merit: 1011

Just tested this out on a fresh out of the box (non-optimized) RX470 4GB and I am getting 285 sols without changing anything. I also ran the same test with Claymore's V11 for comparison purposes and there I can get ~218 sols, so you are really closing in on the gap, good job!

Considering that the Claymore miner has a fee and your does not, the performance gap is even smaller than it first appears. I also like that you decided to utilize the sgminer interface on this latest release.

UberMakedonische

member

Activity: 120

Merit: 10

Just a quick THANKS!!!
Keep up with the awesome work...
As my addition here is my youtube video about this miner...
https://www.youtube.com/watch?v=K3CT5MIhn4s
Thanks Again

antantti

legendary

Activity: 1176

Merit: 1015

Quick tests with 3x390 stock:

GG 860 sol/s
CM 960 sol/s
Optiminer 1050 sol/s

Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 182. (Read 214431 times)