Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 99.

coke15

member

Activity: 176

Merit: 10

Quote from: icedevil on January 05, 2018, 11:52:43 AM

for my 6x rx570 4g pulse sapphire this is the best stable hashrate

hi i have the same rig than you you homemade bios mod.
how many have you?

i have a strange problem: hasrate drop after couple hours i start at 4200 and drop to 3400 :/

core drop, 0/50/100% no way to force 100% core always?

icedevil

member

Activity: 242

Merit: 10

for my 6x rx570 4g pulse sapphire this is the best stable hashrate

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: QuirkSilver on January 05, 2018, 12:00:35 AM

Probably the garbage hynix MJR crap right? short answer is : 1536*8*2 and you have to get that custom GDDR5 strap from the thread here.... Not the Good hynix strap from polaris 1.6.3 editor.
memory won't give you errors in HW info, clock it to 2000 default and know that 2100mhz is near the blue screen threshold :-) but yes, it gives slightly higher hashes around 905 h/s with old GG (and new afaik)

Can you describe what means 1536*8*2 ? I don't understand them. I edited straps via SPB Polaris editor. But I don't remember numbers like yours.

P.S. Yes, cryptonight algo in GGS 1.1.14 is stable as rock! No one issue happend during couple of hours allready!

minerbaba

newbie

Activity: 91

Merit: 0

Quote from: zawawa on January 05, 2018, 03:54:37 AM

Quote from: minerbaba on January 05, 2018, 02:34:33 AM

neoscrypt miner stopped working after sometime

Exception in Stratum.StreamReaderThread(): System.IO.IOException: Unable to read data from the transport connection: An established connection was aborted by the software in your host machine. ---> System.Net.Sockets.SocketException: An established connection was aborted by the software in your host machine
   at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   --- End of inner exception stack trace ---
   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   at System.IO.StreamReader.ReadBuffer()
   at System.IO.StreamReader.ReadLine()
   at GatelessGateSharp.Stratum.StreamReaderThread()

This is a pool issue:

https://stackoverflow.com/questions/31931438/c-sharp-an-established-connection-was-aborted-by-the-software-in-your-host-mac

Which pool are you using?

https://altminer.net/
and
http://bsod.pw/

Log
https://drive.google.com/file/d/1cgVGf26uVIUiQF5SMfqo4s_98GBortDv/view

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: zawawa on January 04, 2018, 09:21:05 PM

Quote from: UnclWish on January 04, 2018, 09:06:16 PM

Quote from: zawawa on January 04, 2018, 09:03:40 PM

Quote from: UnclWish on January 04, 2018, 08:29:09 PM

Find a bug in 1.1.14 allready: after changing intensity of cryptonight and pressing Start, GGS drops with program error.
But good news is that you take full control on adrenalin 17.12.x drivers and now GGS releases my 1st GPU after stopping mining! And low diff rejects gone!
You're great developer you know?!

Oh, that "bug" is by design. Like you said, the miner has to be restarted everytime a new value is set for intensity for CryptoNight. I had to use all sorts of dirty tricks to make the miner stable. I don't know about my greatness, but I am definitely more persistent than most developers.

Hmmm, I think that you must make button "Apply" that will be restart GGS or something like this.
Cryptonight became more stable - it's the fact!
And in next version please fix default intensity for cryptonight on 270X it 60 the best not 40.

P.S. GGS Monitor didn't restart GGS after error with changing intensity. It must do that?

It does on my PC's. In fact, there shouldn't be an error message. Can I see a screenshot of of the error message?

From event viewer:

- System

  - Provider

   [ Name] Application Error

  - EventID 1000

   [ Qualifiers] 0

   Level 2

   Task 100

   Keywords 0x80000000000000

  - TimeCreated

   [ SystemTime] 2018-01-05T01:21:14.044199200Z

   EventRecordID 33130

   Channel Application

   Computer WishMaster

   Security

- EventData

   GatelessGateSharp.exe
   1.1.14.0
   5a4ed03d
   amdocl64.dll
   23.20.15007.1005
   5a36cb81
   c0000409
   0000000002079595
   3370
   01d385c3225aa268
   E:\MinerControlAMD\GGS\GatelessGateSharp.exe
   C:\WINDOWS\System32\DriverStore\FileRepository\c0322096.inf_amd64_7ff7d53c3793b9e4\amdocl64.dll
   16b81c47-320a-4b96-884f-200012ac63c9

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: ?? on ??

Quote from: UnclWish on January 04, 2018, 08:55:31 PM

Quote from: ?? on ??

Quote from: UnclWish on January 04, 2018, 08:41:36 PM

Quote from: ?? on ??

Quote from: zawawa on January 04, 2018, 05:02:53 PM

Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock!
No rejected shares so far. I will upload a new version very soon...

Wow, also a big improvement with the hashrate.
From 1007 h/s with v1.1.13 to 1070 h/s with v1.1.14
THAT'S SURPASSING CLAYMORE!!!

Also, "Copy to Similar Devices" great idea.

What cards? Please more specific. On my 580 and 270 speed the same as in previous versions...

P.S. zawawa, for 270X best intensity is 60 not 40. Please fix it.

MSI Radeon RX580 8GB Gaming X - bios modded, driver version 17.12.2

I have this card too. But i have only 860 h/s on it. What clocks you're use and what bios mod? Mamory hynix or samsung?

Here are my memory straps:
UberMix 2.3
1:1500 and up 777000000000000022CC1C00AD615B41C0570E152DCB7409006007000B031420FA8900A00300000 010123A46DB354019

Good HYNIX_2
2:1500 and up 777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17

no OC, never got any stable settings and with the latest driver it is a pain to test.
Waiting for Zawawa with a great solution Grin

Your card with samsung memory, thats why it gives above 1k h/s. It's ubermix straps do. Hynix memory with strap you wrote can't do that.

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: minerbaba on January 05, 2018, 02:34:33 AM

neoscrypt miner stopped working after sometime

Exception in Stratum.StreamReaderThread(): System.IO.IOException: Unable to read data from the transport connection: An established connection was aborted by the software in your host machine. ---> System.Net.Sockets.SocketException: An established connection was aborted by the software in your host machine
at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer()
at System.IO.StreamReader.ReadLine()
at GatelessGateSharp.Stratum.StreamReaderThread()

This is a pool issue:

https://stackoverflow.com/questions/31931438/c-sharp-an-established-connection-was-aborted-by-the-software-in-your-host-mac

Which pool are you using?

minerbaba

newbie

Activity: 91

Merit: 0

neoscrypt miner stopped working after sometime

Exception in Stratum.StreamReaderThread(): System.IO.IOException: Unable to read data from the transport connection: An established connection was aborted by the software in your host machine. ---> System.Net.Sockets.SocketException: An established connection was aborted by the software in your host machine
at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer()
at System.IO.StreamReader.ReadLine()
at GatelessGateSharp.Stratum.StreamReaderThread()

QuirkSilver

member

Activity: 80

Merit: 13

Quote from: UnclWish on January 04, 2018, 08:55:31 PM

Quote from: ?? on ??

Quote from: UnclWish on January 04, 2018, 08:41:36 PM

Quote from: ?? on ??

Quote from: zawawa on January 04, 2018, 05:02:53 PM

Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock!
No rejected shares so far. I will upload a new version very soon...

Wow, also a big improvement with the hashrate.
From 1007 h/s with v1.1.13 to 1070 h/s with v1.1.14
THAT'S SURPASSING CLAYMORE!!!

Also, "Copy to Similar Devices" great idea.

What cards? Please more specific. On my 580 and 270 speed the same as in previous versions...

P.S. zawawa, for 270X best intensity is 60 not 40. Please fix it.

MSI Radeon RX580 8GB Gaming X - bios modded, driver version 17.12.2

I have this card too. But i have only 860 h/s on it. What clocks you're use and what bios mod? Mamory hynix or samsung?

Probably the garbage hynix MJR crap right? short answer is : 1536*8*2 and you have to get that custom GDDR5 strap from the thread here.... Not the Good hynix strap from polaris 1.6.3 editor.
memory won't give you errors in HW info, clock it to 2000 default and know that 2100mhz is near the blue screen threshold :-) but yes, it gives slightly higher hashes around 905 h/s with old GG (and new afaik)

proft

newbie

Activity: 26

Merit: 0

Quote from: goodb on January 04, 2018, 07:08:30 PM

Quote from: goodb on January 04, 2018, 04:20:15 PM

try 1750 first, 1750 is safer , 1500 is more tight timings you are copying to higher frequency.. If 1750 brings some good improvement then you dont need 1500.

And last time I forget to mention : install amd 17.12.2 drivers , and from radeon--->gaming--global settings--change gpu workload to: compute ...and be sure it stays like that, even after restart.. This is very important..

Quote from: icedevil on January 04, 2018, 08:30:16 AM

https://anorak.tech/t/sapphire-rx-570-pulse/5337

memshift 1500 or 1750?

Thanks.
Memshift 1625 1700 2000. I have pulse ITX (one cooler).

Stop ! If it is not exactly your card, dont flash your card ! I would say more and more but here is Gateless Gate discussion topic.. You have to search and learn about bios modding little bit more..
Look this topic , you have everything to mod your bios : https://bitcointalksearch.org/topic/guidetutorialxmrethhow-to-mod-bios-rx470570480580-vega-mining-1954245

and your card is ITX (mini version) , I think it is normal to expect little bit less hash rate than big brothers..

Maybe...
But. I see video youtube how guy mode this VC and have 860-900 h/s.
I try...
Use him timing...drivers 11.17.1.
Use blockchain drivers....
Max 750-760....

I save bios CPU-Z, and change timing with SRBPolarisV3-2-Int...Maybe i must change programm for change timing?

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: UnclWish on January 04, 2018, 09:06:16 PM

Quote from: zawawa on January 04, 2018, 09:03:40 PM

Quote from: UnclWish on January 04, 2018, 08:29:09 PM

Find a bug in 1.1.14 allready: after changing intensity of cryptonight and pressing Start, GGS drops with program error.
But good news is that you take full control on adrenalin 17.12.x drivers and now GGS releases my 1st GPU after stopping mining! And low diff rejects gone!
You're great developer you know?!

Oh, that "bug" is by design. Like you said, the miner has to be restarted everytime a new value is set for intensity for CryptoNight. I had to use all sorts of dirty tricks to make the miner stable. I don't know about my greatness, but I am definitely more persistent than most developers.

Hmmm, I think that you must make button "Apply" that will be restart GGS or something like this.
Cryptonight became more stable - it's the fact!
And in next version please fix default intensity for cryptonight on 270X it 60 the best not 40.

P.S. GGS Monitor didn't restart GGS after error with changing intensity. It must do that?

It does on my PC's. In fact, there shouldn't be an error message. Can I see a screenshot of of the error message?

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: zawawa on January 04, 2018, 09:03:40 PM

Quote from: UnclWish on January 04, 2018, 08:29:09 PM

Find a bug in 1.1.14 allready: after changing intensity of cryptonight and pressing Start, GGS drops with program error.
But good news is that you take full control on adrenalin 17.12.x drivers and now GGS releases my 1st GPU after stopping mining! And low diff rejects gone!
You're great developer you know?!

Oh, that "bug" is by design. Like you said, the miner has to be restarted everytime a new value is set for intensity for CryptoNight. I had to use all sorts of dirty tricks to make the miner stable. I don't know about my greatness, but I am definitely more persistent than most developers.

Hmmm, I think that you must make button "Apply" that will be restart GGS or something like this.
Cryptonight became more stable - it's the fact!
And in next version please fix default intensity for cryptonight on 270X it 60 the best not 40.

P.S. GGS Monitor didn't restart GGS after error with changing intensity. It must do that?

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Quote from: UnclWish on January 04, 2018, 08:29:09 PM

Find a bug in 1.1.14 allready: after changing intensity of cryptonight and pressing Start, GGS drops with program error.
But good news is that you take full control on adrenalin 17.12.x drivers and now GGS releases my 1st GPU after stopping mining! And low diff rejects gone!
You're great developer you know?!

Oh, that "bug" is by design. Like you said, the miner has to be restarted everytime a new value is set for intensity for CryptoNight. I had to use all sorts of dirty tricks to make the miner stable. I don't know about my greatness, but I am definitely more persistent than most developers.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: zawawa on January 04, 2018, 08:45:19 PM

Gateless Gate Sharp 1.1.14 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.1.14-alpha

* Fixed critical bugs with CryptoNight.
* Made numeric schemes for intensity more consistent.
* Added features to make device settings easier.
* Made user interface more responsive.
* Improved the watchdog feature.
* Various bug fixes and improvements.

This is supposed to be the most stable release to date.
I will let you guys decide...

Find a bug in 1.1.14 allready: after changing intensity of cryptonight and pressing Start, GGS drops with program error.
But good news is that you take full control on adrenalin 17.12.x drivers and now GGS releases my 1st GPU after stopping mining! And low diff rejects gone!
You're great developer you know?!

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: ?? on ??

Quote from: UnclWish on January 04, 2018, 08:41:36 PM

Quote from: ?? on ??

Quote from: zawawa on January 04, 2018, 05:02:53 PM

Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock!
No rejected shares so far. I will upload a new version very soon...

Wow, also a big improvement with the hashrate.
From 1007 h/s with v1.1.13 to 1070 h/s with v1.1.14
THAT'S SURPASSING CLAYMORE!!!

Also, "Copy to Similar Devices" great idea.

What cards? Please more specific. On my 580 and 270 speed the same as in previous versions...

P.S. zawawa, for 270X best intensity is 60 not 40. Please fix it.

MSI Radeon RX580 8GB Gaming X - bios modded, driver version 17.12.2

I have this card too. But i have only 860 h/s on it. What clocks you're use and what bios mod? Mamory hynix or samsung?

zawawa

sr. member

Activity: 728

Merit: 304

Miner Developer

Gateless Gate Sharp 1.1.14 alpha
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v1.1.14-alpha

* Fixed critical bugs with CryptoNight.
* Made numeric schemes for intensity more consistent.
* Added features to make device settings easier.
* Made user interface more responsive.
* Improved the watchdog feature.
* Various bug fixes and improvements.

This is supposed to be the most stable release to date.
I will let you guys decide...

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: ?? on ??

Quote from: zawawa on January 04, 2018, 05:02:53 PM

Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock!
No rejected shares so far. I will upload a new version very soon...

Wow, also a big improvement with the hashrate.
From 1007 h/s with v1.1.13 to 1070 h/s with v1.1.14
THAT'S SURPASSING CLAYMORE!!!

Also, "Copy to Similar Devices" great idea.

What cards? Please more specific. On my 580 and 270 speed the same as in previous versions...

P.S. zawawa, for 270X best intensity is 60 not 40. Please fix it.

UnclWish

sr. member

Activity: 1484

Merit: 253

Find a bug in 1.1.14 allready: after changing intensity of cryptonight and pressing Start, GGS drops with program error.
But good news is that you take full control on adrenalin 17.12.x drivers and now GGS releases my 1st GPU after stopping mining! And low diff rejects gone!
You're great developer you know?!

fr4nkthetank

legendary

Activity: 2294

Merit: 1182

Now the money is free, and so the people will be

Quote from: UnclWish on January 04, 2018, 08:02:07 PM

Quote from: zawawa on January 04, 2018, 05:02:53 PM

Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock!
No rejected shares so far. I will upload a new version very soon...

Great! Thanks! We're wating.
Meanwhile... can you say what can cause rejected low difficulty shares on Pitcairn GPU?

Nice ! I'll try it out as soon as it comes out. thanks for the hard work and the update.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: zawawa on January 04, 2018, 05:02:53 PM

Good news, guys and gals! I fixed a few critical bugs with CryptoNight and the miner is now as stable as a rock!
No rejected shares so far. I will upload a new version very soon...

Great! Thanks! We're wating.
Meanwhile... can you say what can cause rejected low difficulty shares on Pitcairn GPU?

Topic: Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480! - page 99. (Read 214431 times)