I think I remember a message here form Josh or Rami about new support emails, I can't seem to find the post in question.. would anyone know what they are?
Thanks
Topic: GAW Community is located at: community.gawminers.com - page 37. (Read 506589 times)
Just recieved credit for the free fury contest, as was just greeted with the delicious Zeus pi. Now just gotta wait for that Fury 
Anyone having issues with units underperforming? I have a Widow that jumps all over the place, and gives me a 24hr average of 8.5 MH/s. I emailed hosting support and waiting to hear back from them. All my other units work great though, so it's not a pool issue. Curious if anyone is having these kinds of issues. 
hey anyone having problems with the zenminer website? Wont let me register... it does nothing when i click register just adds a # sound next to the url.
Everyone; it's not active yet.
hey anyone having problems with the zenminer website? Wont let me register... it does nothing when i click register just adds a # sound next to the url.
Hey Guys -
Just a small update... I've been using GAW now for hosted miners since they started the service (as a founder) and despite the bumps in the road, I've been very pleased with the responsiveness of Jeff and Luke and the rest of the support staff there. They seem to be working very hard on updating the UI for the hosted customers regularly, and they communicate as well if not better than any hosted service I've every dealt with. Gotta hand it to Josh and the boys - they have won my business and if you are on the fence, jump over and join already. Just remember that the service is still in it's infancy and be patient and they'll keep their end of the bargain and more.
Peace,
r00tdude
Just a small update... I've been using GAW now for hosted miners since they started the service (as a founder) and despite the bumps in the road, I've been very pleased with the responsiveness of Jeff and Luke and the rest of the support staff there. They seem to be working very hard on updating the UI for the hosted customers regularly, and they communicate as well if not better than any hosted service I've every dealt with. Gotta hand it to Josh and the boys - they have won my business and if you are on the fence, jump over and join already. Just remember that the service is still in it's infancy and be patient and they'll keep their end of the bargain and more.
Peace,
r00tdude
Got my Zenminer Pi kit today.
On the Black Widow... It's up and down quite a bit and still only maxes out at 13MHs. Here's a pic for you (it's stalled right now.)
http://i210.photobucket.com/albums/bb81/alienstout/blackwidow1_zps7064fd48.jpg
On the Black Widow... It's up and down quite a bit and still only maxes out at 13MHs. Here's a pic for you (it's stalled right now.)
http://i210.photobucket.com/albums/bb81/alienstout/blackwidow1_zps7064fd48.jpg
Hopefully there will be a firmware update soon that will fix most of these problems.
Volder how about an update on the War Machine. Looking to purchase a Week 3 so I am interested to see how it is performing. Thanks
Got my Zenminer Pi kit today.
On the Black Widow... It's up and down quite a bit and still only maxes out at 13MHs. Here's a pic for you (it's stalled right now.)
On the Black Widow... It's up and down quite a bit and still only maxes out at 13MHs. Here's a pic for you (it's stalled right now.)
So ordering two furys in one order yeilds one controller? I ordered two and only received one.
I would contact support. I bet they would send you another controller pretty quick.Thanks.
will do
So ordering two furys in one order yeilds one controller? I ordered two and only received one.
I would contact support. I bet they would send you another controller pretty quick. Also, I have yet to see an answer about whether you will get a second zencontroller on an additional order. My brother wants me to purchase a fury for him but I just want to make sure I will get another controller.
Yes, you will get another controller. Here it is, straight from GAWminers.com.http://www.gawminers.com/the-fury-1-mh-s-asic-scrypt-miner-week-three/
Quote
WHAT IS INCLUDED:
1 x GAW Miners Fury
1 x USB DATA cable
1 x Power Supply Unit
1 x ZenController by ZenMiner
1 x SD CARD ready for ZenController with GAW Miners firmware.
1 x USB DATA cables to use with the ZenController
1 x ZenController power cable for standard power supply unit (4 PIN Connection)
1 x GAW Miners Fury
1 x USB DATA cable
1 x Power Supply Unit
1 x ZenController by ZenMiner
1 x SD CARD ready for ZenController with GAW Miners firmware.
1 x USB DATA cables to use with the ZenController
1 x ZenController power cable for standard power supply unit (4 PIN Connection)
So ordering two furys in one order yeilds one controller? I ordered two and only received one.
I've been running gridseeds off a PI for several weeks now. Found cpminer 3.7.2 built for the gridseeds the most stable version. Personally using a Gentoo Linux build, but I doubt that matters.
Minera is by far the best (to date) for Gridseeds. Also, I have yet to see an answer about whether you will get a second zencontroller on an additional order. My brother wants me to purchase a fury for him but I just want to make sure I will get another controller.
Yes, you will get another controller. Here it is, straight from GAWminers.com.http://www.gawminers.com/the-fury-1-mh-s-asic-scrypt-miner-week-three/
Quote
WHAT IS INCLUDED:
1 x GAW Miners Fury
1 x USB DATA cable
1 x Power Supply Unit
1 x ZenController by ZenMiner
1 x SD CARD ready for ZenController with GAW Miners firmware.
1 x USB DATA cables to use with the ZenController
1 x ZenController power cable for standard power supply unit (4 PIN Connection)
1 x GAW Miners Fury
1 x USB DATA cable
1 x Power Supply Unit
1 x ZenController by ZenMiner
1 x SD CARD ready for ZenController with GAW Miners firmware.
1 x USB DATA cables to use with the ZenController
1 x ZenController power cable for standard power supply unit (4 PIN Connection)
I've been running gridseeds off a PI for several weeks now. Found cpminer 3.7.2 built for the gridseeds the most stable version. Personally using a Gentoo Linux build, but I doubt that matters.
Also received my Zenminer this afternoon. Has anyone tried to run gridseeds on it yet?
Also, I have yet to see an answer about whether you will get a second zencontroller on an additional order. My brother wants me to purchase a fury for him but I just want to make sure I will get another controller.
Thanks guys, and keep up the great work. My DHL shipment just updated from Honk Kong to Cincinatti! Should be here tomorrow.
Also, I have yet to see an answer about whether you will get a second zencontroller on an additional order. My brother wants me to purchase a fury for him but I just want to make sure I will get another controller.
Thanks guys, and keep up the great work. My DHL shipment just updated from Honk Kong to Cincinatti! Should be here tomorrow.
Another happy GAW customer here. I've ordered (and received) 2 Gridseeds from them in the past and just completed an order for a Fury.
Very happy with the service (Amanda was great!) and looking forward to getting the Fury and included Zen Controller!
Very happy with the service (Amanda was great!) and looking forward to getting the Fury and included Zen Controller!
I have not asked Jeff about the high discard rate yet. We will get there, but there are bigger fish to fry right now. I don't know anything about the war machines being clocked up/down, they may have done that. I have never seen high rejects on mine, only high discards. I'm certain that after some tuning/tweaking, we will get these minor issues resolved. I say they are minor because it's still hashing over advertised/purchased speed with this problems.
True, but if the hardware is running at a freq over what the chips can handle that's a recipe for killing the life of the device. I'll have very few options with the Fury for optimization due to limited capacity of the device but still want to get each KH out of it I can. That's why I'm curious to hear more reports from the folks with hosted hardware in regards to stats, pools, coins, etc. (since y'all actually have numbers we can talk against).
But if, say, the hardware can only safely handle ~45M on a WM and 54M really is pushing the hardware that much leading to super high HW errors, kinda like the vold modders, some folks may want to run hardware hotter for more net hashrate and not be concerned with the life of the device vs. those of us who prefer to stay within the bounds of being the device happy and living to be a happy old, er, device.
For me personally, life of the device is a moot point. I won't have these miners long enough to matter. Once they ROI I will sell them off and move to the next ASIC. Same thing I did with GPUs, Gridseed pods and then blades. Got to stay ahead of the curve.
almost 24+ hours of Gen A Fury hosted miner and tweaking problem resolution solving and I am very happy...hope this feeling lasts 4ever
Can you give us info on stats (A/R/HW, hashrate), pool stability, etc.? I think since we know the performance can vary based on pool/coin we'll want a list of what pools and configs work best.
Here is a screenshot from my hosted dashboard. There is a bug in the UI that is causing A/R/HW not to show on the main dashboard. My War Machine rebooted a few minutes ago, so I'll give it a little bit of time to run and then post a better A/R/HW screenshot for you. Pool stability has been great. There is still a bug with pool configs that Jeff is working on sorting out. Rejects are extremely low (0.02%) but discards are high (about 25%). Even with high discard errors, it hashes higher than the advertised 54MH/s.
Screenshot running on Clevermining (short term sample).
Here is a screenshot from Nicehash. The part I circled in red was over night, War Machine only. The average was about 60Mh/s.
^^ cut images, made reply crazy long
Awesome! You said you're working with Jeff @ GAW, does he have any idea about the high discard rate? Someone mentioned their war machine being toned down to 54M before and the 'reject' rate went down, not sure if that included just reject or is a combined r/hw, so do we know if it is overclocking that is leading to that? That's the case on the other scrypt chips out there, run them slightly too high on frequency and things go haywire (every G-blade I have but one runs at 838 like a charm, but one produces ~15% error rate at 838 and < 1% HW rate at 825), and makes sense based on the type of hashing these are doing, but seeing if y'all have any other observations from running hardware.
I see your miner uptime was only 8 minutes - did the Miner constant restart issue get fixed ?
I have not had any constant restart issues with the War Machine. I used to have that issue with my blades, but that has been fixed now (and I only have 1 blade now anyways).
I see your miner uptime was only 8 minutes - did the Miner constant restart issue get fixed ?
Jump to: