¤¤¤¤ gekkorun.de - Gekkoscience Fun-Run - compare your share ¤¤¤¤ - page 14.

ammi84

sr. member

Activity: 462

Merit: 251

Quote from: kipper01 on June 09, 2016, 09:10:45 PM

Quote from: andymanone on June 09, 2016, 03:12:34 AM

Quote from: kipper01 on June 08, 2016, 08:39:25 PM

Ok maybe I am slow but how do I add more. such as kipper01 g2 & kipper01 g3, etc

Hi kipper01,
you´re not able to add more workers.

Only what you have to do is, to post here your additional ones, e.g. in this way:

kipper01
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g1

kipper01 2
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g2

kipper01 3
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g3

and we add you finally to gekkorun.

andY

Please add

kipper01 2
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g2
360MHz

kipper01 3
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g3
360MHZ

added you

thanks for joining

kipper01

full member

Activity: 214

Merit: 100

1KippERXwH1PdBxKNt1ksgqh89WBv6CtWQ

Quote from: andymanone on June 09, 2016, 03:12:34 AM

Quote from: kipper01 on June 08, 2016, 08:39:25 PM

Ok maybe I am slow but how do I add more. such as kipper01 g2 & kipper01 g3, etc

Hi kipper01,
you´re not able to add more workers.

Only what you have to do is, to post here your additional ones, e.g. in this way:

kipper01
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g1

kipper01 2
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g2

kipper01 3
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g3

and we add you finally to gekkorun.

andY

Please add

kipper01 2
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g2
360MHz

kipper01 3
USA
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g3
360MHZ

andymanone

sr. member

Activity: 432

Merit: 250

Save the past & use the future ©

Quote from: edonkey on June 08, 2016, 05:10:45 PM

Thanks andY. I just tried changing my clock rate again, using exactly the same inputs, and it worked fine this time.

Maybe there's a problem with setting the clock rate the first time, but once initialized it works for that point on?

Great

!
Yes there was an little issue, but ammi fixed it.

andY

andymanone

sr. member

Activity: 432

Merit: 250

Save the past & use the future ©

Quote from: kipper01 on June 08, 2016, 08:39:25 PM

Ok maybe I am slow but how do I add more. such as kipper01 g2 & kipper01 g3, etc

Hi kipper01,
you´re not able to add more workers.

Only what you have to do is, to post here your additional ones, e.g. in this way:

kipper01
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g1

kipper01 2
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g2

kipper01 3
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g3

and we add you finally to gekkorun.

andY

kipper01

full member

Activity: 214

Merit: 100

1KippERXwH1PdBxKNt1ksgqh89WBv6CtWQ

Ok maybe I am slow but how do I add more. such as kipper01 g2 & kipper01 g3, etc

edonkey

legendary

Activity: 1150

Merit: 1004

Quote from: andymanone on June 08, 2016, 08:13:42 AM

Quote from: edonkey on June 08, 2016, 07:41:02 AM

Quote from: andymanone on June 08, 2016, 03:31:10 AM

Quote from: kipper01 on June 07, 2016, 08:01:49 PM

Is it possible to add more than 1 miner? I have several running at different MHz?

Btw, little hint

:
you can choose yourself the right clockspeed at the antrun site for your R1

antrun.de -> scroll down -> Change your frequency: -> insert "BTC_Worker",
choose frequency and hit Update

I've tried this a couple of times and keep getting an error indicating that I have to provide valid input. I've tried the usual formats for the BTC address and worker, like so:

18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko1
18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt_gekko1

When I specify either of the above valid inputs plus the frequency of 325 MHz, I get the error.

Not sure what happens,
but I´ve just tried to change your clockrate, and it works perfect:

I´ve just changed (for testing) your clockrate:

18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko1 to 437.50 MHz
18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko2 to 437.50 MHz

You can have a look at gekkorun, it´s updated now

Cheers,
andY

Thanks andY. I just tried changing my clock rate again, using exactly the same inputs, and it worked fine this time.

Maybe there's a problem with setting the clock rate the first time, but once initialized it works for that point on?

andymanone

sr. member

Activity: 432

Merit: 250

Save the past & use the future ©

Quote from: Mikestang on June 08, 2016, 11:21:18 AM

My gekko stick is back in the fun run! Figured out my usb issue and it's ticking away again.

Great Mike, welcome back

!

andY

Mikestang

legendary

Activity: 1274

Merit: 1000

My gekko stick is back in the fun run! Figured out my usb issue and it's ticking away again.

andymanone

sr. member

Activity: 432

Merit: 250

Save the past & use the future ©

Quote from: edonkey on June 08, 2016, 07:41:02 AM

Quote from: andymanone on June 08, 2016, 03:31:10 AM

Quote from: kipper01 on June 07, 2016, 08:01:49 PM

Is it possible to add more than 1 miner? I have several running at different MHz?

Btw, little hint

:
you can choose yourself the right clockspeed at the antrun site for your R1

antrun.de -> scroll down -> Change your frequency: -> insert "BTC_Worker",
choose frequency and hit Update

I've tried this a couple of times and keep getting an error indicating that I have to provide valid input. I've tried the usual formats for the BTC address and worker, like so:

18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko1
18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt_gekko1

When I specify either of the above valid inputs plus the frequency of 325 MHz, I get the error.

Not sure what happens,
but I´ve just tried to change your clockrate, and it works perfect:

I´ve just changed (for testing) your clockrate:

18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko1 to 437.50 MHz
18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko2 to 437.50 MHz

You can have a look at gekkorun, it´s updated now

Cheers,
andY

edonkey

legendary

Activity: 1150

Merit: 1004

Quote from: andymanone on June 08, 2016, 03:31:10 AM

Quote from: kipper01 on June 07, 2016, 08:01:49 PM

Is it possible to add more than 1 miner? I have several running at different MHz?

Btw, little hint

:
you can choose yourself the right clockspeed at the antrun site for your R1

antrun.de -> scroll down -> Change your frequency: -> insert "BTC_Worker",
choose frequency and hit Update

I've tried this a couple of times and keep getting an error indicating that I have to provide valid input. I've tried the usual formats for the BTC address and worker, like so:

18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt.gekko1
18mztP2vq8u79oBPjFvTrMpy53mKHiFQNt_gekko1

When I specify either of the above valid inputs plus the frequency of 325 MHz, I get the error.

andymanone

sr. member

Activity: 432

Merit: 250

Save the past & use the future ©

Quote from: kipper01 on June 07, 2016, 08:01:49 PM

Is it possible to add more than 1 miner? I have several running at different MHz?

Btw, little hint

:
you can choose yourself the right clockspeed at the antrun site for your R1

antrun.de -> scroll down -> Change your frequency: -> insert "BTC_Worker",
choose frequency and hit Update

Cheers,
andY

ammi84

sr. member

Activity: 462

Merit: 251

Quote from: kipper01 on June 07, 2016, 08:01:49 PM

Quote from: andymanone on June 07, 2016, 05:18:54 PM

Quote from: kipper01 on June 07, 2016, 04:23:39 PM

kipper01
US
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g1
230 MHz

Welcome kipper01!
You´re just added.

Have fun.

Cheers,
andY

Is it possible to add more than 1 miner? I have several running at different MHz?

hi,

yes - just use another worker id

thank you for joining and have fun!!

kipper01

full member

Activity: 214

Merit: 100

1KippERXwH1PdBxKNt1ksgqh89WBv6CtWQ

Quote from: andymanone on June 07, 2016, 05:18:54 PM

Quote from: kipper01 on June 07, 2016, 04:23:39 PM

kipper01
US
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g1
230 MHz

Welcome kipper01!
You´re just added.

Have fun.

Cheers,
andY

Is it possible to add more than 1 miner? I have several running at different MHz?

andymanone

sr. member

Activity: 432

Merit: 250

Save the past & use the future ©

Quote from: kipper01 on June 07, 2016, 04:23:39 PM

kipper01
US
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g1
230 MHz

Welcome kipper01!
You´re just added.

Have fun.

Cheers,
andY

kipper01

full member

Activity: 214

Merit: 100

1KippERXwH1PdBxKNt1ksgqh89WBv6CtWQ

kipper01
US
12k7G6BcaoNBKVEUKSaEviWqDmksSRHQLt.g1
230 MHz

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

and I'm out of the top3 !!!

andymanone

sr. member

Activity: 432

Merit: 250

Finally back at home

Aaaaaand: here we go again Grin

!

-> The king is alive

Cheers,
andY

andymanone

sr. member

Activity: 432

Merit: 250

Quote from: zOU on June 02, 2016, 11:47:37 PM

http://prntscr.com/bbq8ax

The King is Dead, Hail the King !

Grin

Hehe

Don't start celebrating just yet Grin

!!!

Unfortunately fu****g Windows 10 made automatically an update over night,
and kills my Zadig drivers and replaced it with a new silabs Angry

!!!

I´m not at home at the moment, but will fix it the eve Wink

Long live the King !

Cheers,
andY

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

http://prntscr.com/bbq8ax

The King is Dead, Hail the King !

Grin

andymanone

sr. member

Activity: 432

Merit: 250

Quote from: vapourminer on May 31, 2016, 04:14:32 PM

hopefully have something in the next few days, gotta fit it in between household and yard projects. actually been meaning to do it for months heh.

Hehe, different countries, same problems Cheesy

andY

Topic: ¤¤¤¤ gekkorun.de - Gekkoscience Fun-Run - compare your share ¤¤¤¤ - page 14. (Read 63663 times)