GekkoScience Compac BM1384 Stickminer Official Support Thread - page 28.

sidehack

legendary

Activity: 3374

Merit: 1859

Curmudgeonly hardware guy

The pool's diff has nothing to do with shares detected within cgminer. Pretty sure that's been gone over two or three times in this thread already. Your advice is fallacious.

CjMapope

legendary

Activity: 1820

Merit: 1092

~Full-Time Minter since 2016~

Quote from: zOU on July 31, 2016, 05:52:18 AM

Quote from: cozyfurf on July 30, 2016, 08:40:58 PM

I've recently bought the Compac, but when I try to mine Emercoin it gives me the following messages:

Code:

[2016-07-30 21:25:44.484] Started cgminer 4.9.2
[2016-07-30 21:25:46.553] Probing for an alive pool
[2016-07-30 21:25:46.850] Pool 0 difficulty changed to 8192
[2016-07-30 21:25:47.554] Network diff set to 485M
[2016-07-30 21:25:58.132] COMPAC 0: No valid hashes for over 10 secs, attempting to reset
[2016-07-30 21:25:58.133] COMPAC 0 attempted reset got err:(0) LIBUSB_SUCCESS
COMPAC 0: Device failed to respond to restart
[2016-07-30 21:34:24.101] COMPAC 0 failure, disabling!

And it does this with seemingly no end, what am I doing wrong?

just unplug replug the miner while cgminer is running

but if the difficulty is still 8192, won't cgminer just do the same thing in a few mins without shares submitted even IF he just "replugs the miner"?
cause isn't it doing that because of the high dif?
just saying, telling someone to "reboot it" dosen't really give a solution is all haha

zOU

hero member

Activity: 728

Merit: 500

★ these are stars ★

Quote from: cozyfurf on July 30, 2016, 08:40:58 PM

I've recently bought the Compac, but when I try to mine Emercoin it gives me the following messages:

Code:

[2016-07-30 21:25:44.484] Started cgminer 4.9.2
[2016-07-30 21:25:46.553] Probing for an alive pool
[2016-07-30 21:25:46.850] Pool 0 difficulty changed to 8192
[2016-07-30 21:25:47.554] Network diff set to 485M
[2016-07-30 21:25:58.132] COMPAC 0: No valid hashes for over 10 secs, attempting to reset
[2016-07-30 21:25:58.133] COMPAC 0 attempted reset got err:(0) LIBUSB_SUCCESS
COMPAC 0: Device failed to respond to restart
[2016-07-30 21:34:24.101] COMPAC 0 failure, disabling!

And it does this with seemingly no end, what am I doing wrong?

just unplug replug the miner while cgminer is running

CjMapope

legendary

Activity: 1820

Merit: 1092

~Full-Time Minter since 2016~

Quote from: cozyfurf on July 30, 2016, 08:40:58 PM

I've recently bought the Compac, but when I try to mine Emercoin it gives me the following messages:

Code:

[2016-07-30 21:25:44.484] Started cgminer 4.9.2
[2016-07-30 21:25:46.553] Probing for an alive pool
[2016-07-30 21:25:46.850] Pool 0 difficulty changed to 8192
[2016-07-30 21:25:47.554] Network diff set to 485M
[2016-07-30 21:25:58.132] COMPAC 0: No valid hashes for over 10 secs, attempting to reset
[2016-07-30 21:25:58.133] COMPAC 0 attempted reset got err:(0) LIBUSB_SUCCESS
COMPAC 0: Device failed to respond to restart
[2016-07-30 21:34:24.101] COMPAC 0 failure, disabling!

And it does this with seemingly no end, what am I doing wrong?

the problem there is cgminer is thinking the stick is dead because the pool difficulty is too high so your not getting a share within a min or 2 (so its resetting it)
the solution is to find a lower difficulty port for that coin, and if u can't get lower dif port you will need to find an "easier" pool to mine at ;/

hope that helps Wink

your technically not "doing anything wrong" the difficulty of that pool is just too high for your little stick ;/ ( its at 8192, you need like 8 )

cozyfurf

newbie

Activity: 1

Merit: 0

I've recently bought the Compac, but when I try to mine Emercoin it gives me the following messages:

Code:

[2016-07-30 21:25:44.484] Started cgminer 4.9.2
[2016-07-30 21:25:46.553] Probing for an alive pool
[2016-07-30 21:25:46.850] Pool 0 difficulty changed to 8192
[2016-07-30 21:25:47.554] Network diff set to 485M
[2016-07-30 21:25:58.132] COMPAC 0: No valid hashes for over 10 secs, attempting to reset
[2016-07-30 21:25:58.133] COMPAC 0 attempted reset got err:(0) LIBUSB_SUCCESS
COMPAC 0: Device failed to respond to restart
[2016-07-30 21:34:24.101] COMPAC 0 failure, disabling!

And it does this with seemingly no end, what am I doing wrong?

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: boymoku on July 28, 2016, 06:51:11 PM

Thank you Mr.Unacceptable

And Can i ask you something..

i use program call MinerGate v6.3 by this pic

IF i need use my GekkoScience Compac BM1384 Stickminer for digging ETH bitcoin by that pic

How can i set program cgminer_run

thank you

You can't mine Eth with that device it is for SHA 256 coins only Sad

You need a good video card like AMD 7800 series (some Nvidia cards work too) & up to mine Eth Wink

boymoku

newbie

Activity: 8

Merit: 0

Thank you Mr.Unacceptable

And Can i ask you something..

i use program call MinerGate v6.3 by this pic

https://i.imgur.com/4wfSNzF.jpg

IF i need use my GekkoScience Compac BM1384 Stickminer for digging ETH bitcoin by that pic

How can i set program cgminer_run

thank you

Unacceptable

legendary

Activity: 2212

Merit: 1001

Quote from: boymoku on July 28, 2016, 05:59:21 PM

Quote from: irritant on July 28, 2016, 05:35:42 PM

are you sure you double clicked cgminer_run?
now it looks like cgminer.exe is running without the settings given in that file? maybe because you double clicked cgminer.exe instead of cgminer_run.bat

Hello Mr.irritant .. sorry i mistake that . now i reclick and it run

Can i ask you , What line what point in this pic show when i got bitcoin

..umm How i know that i get Bitcoin when i run this program
How can i check ??

Thank you sir.

Here are your earnings on the Eligius pool page Wink

Add it to your favorites in your browser & you can check anytime you want Cool

http://eligius.st/~wizkid057/newstats/userstats.php/1LLckY4u9h1b3CXXRDdj7NQ5Maj8MiKxJS

boymoku

newbie

Activity: 8

Merit: 0

Quote from: irritant on July 28, 2016, 05:35:42 PM

are you sure you double clicked cgminer_run?
now it looks like cgminer.exe is running without the settings given in that file? maybe because you double clicked cgminer.exe instead of cgminer_run.bat

Hello Mr.irritant .. sorry i mistake that . now i reclick and it run

https://i.imgur.com/uogXBfq.jpg

Can i ask you , What line what point in this pic show when i got bitcoin

..umm How i know that i get Bitcoin when i run this program
How can i check ??

Thank you sir.

irritant

sr. member

Activity: 473

Merit: 250

Sodium hypochlorite, acetone, ethanol

are you sure you double clicked cgminer_run?
now it looks like cgminer.exe is running without the settings given in that file? maybe because you double clicked cgminer.exe instead of cgminer_run.bat

boymoku

newbie

Activity: 8

Merit: 0

Quote from: ZedZedNova on July 27, 2016, 11:57:53 PM

Quote from: boymoku on July 27, 2016, 06:52:41 PM

Quote from: Mikestang on July 27, 2016, 06:46:02 PM

In your command line or batch file that you use to launch cgminer you need to put your own btc address (or user name) in for the user, and your password if the pool requires one. If you post up your batch file we can show you exactly what needs to change.

Thank u Mr.Mikestang and this is my run file cgminer_run

in notepad that write..

cgminer.exe -o stratum+tcp://stratum.mining.eligius.st:3334 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr --compac-freq 150

=====

sorry i new and i read #1 post but i dont understand

Change what is in bold to your bitcoin address or username depending on what the pool you are using requires.

Cheers,

- zed

Hello Mr.ZedZedNova

   i download and register in web https://electrum.org/#download

   and i got my bitcoin address == 1LLckY4u9h1b3CXXRDdj7NQ5Maj8MiKxJS

   when i replace in that

cgminer.exe -o stratum+tcp://stratum.mining.eligius.st:3334 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr --compac-freq 150

i change my

cgminer.exe -o stratum+tcp://stratum.mining.eligius.st:3334 -u 1LLckY4u9h1b3CXXRDdj7NQ5Maj8MiKxJS --compac-freq 150

and run it but it show this

https://i.imgur.com/bHX9mdu.jpg

what wrong Huh

How i can fix

thank u very much

ZedZedNova

sr. member

Activity: 475

Merit: 265

Ooh La La, C'est Zoom!

Quote from: boymoku on July 27, 2016, 06:52:41 PM

Quote from: Mikestang on July 27, 2016, 06:46:02 PM

In your command line or batch file that you use to launch cgminer you need to put your own btc address (or user name) in for the user, and your password if the pool requires one. If you post up your batch file we can show you exactly what needs to change.

Thank u Mr.Mikestang and this is my run file cgminer_run

in notepad that write..

cgminer.exe -o stratum+tcp://stratum.mining.eligius.st:3334 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr --compac-freq 150

=====

sorry i new and i read #1 post but i dont understand

Change what is in bold to your bitcoin address or username depending on what the pool you are using requires.

Cheers,

- zed

boymoku

newbie

Activity: 8

Merit: 0

Quote from: Mikestang on July 27, 2016, 06:46:02 PM

In your command line or batch file that you use to launch cgminer you need to put your own btc address (or user name) in for the user, and your password if the pool requires one. If you post up your batch file we can show you exactly what needs to change.

Thank u Mr.Mikestang and this is my run file cgminer_run

in notepad that write..

cgminer.exe -o stratum+tcp://stratum.mining.eligius.st:3334 -u 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr --compac-freq 150

=====

sorry i new and i read #1 post but i dont understand

Mikestang

legendary

Activity: 1274

Merit: 1000

In your command line or batch file that you use to launch cgminer you need to put your own btc address (or user name) in for the user, and your password if the pool requires one. If you post up your batch file we can show you exactly what needs to change.

boymoku

newbie

Activity: 8

Merit: 0

Quote from: MrBogy on July 27, 2016, 12:23:36 PM

Greetings Boymoku.

Simply go to page 104 of this thread and you'll find a clue to your solution.

Cheers.

Thank u Mr.MrBogy . your suggestion makes me run that perfect Grin

https://i.imgur.com/Hk6Ebro.jpg

And i ask somthing ... How can i change

user 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr

belong to my account =>> boymoku

thank u again.. and sorry for poor english

MrBogy

newbie

Activity: 3

Merit: 0

Greetings Boymoku.

Simply go to page 104 of this thread and you'll find a clue to your solution.

Cheers.

boymoku

newbie

Activity: 8

Merit: 0

Sorry Mr.ZedZedNova

i Read the first post and do that but i has a problem ...

when i install the winusb driver for the compac(s) and i double click cgminer for run program

it show me that pic ...

http://image.free.in.th/v/2013/ia/160727114525.jpg

and close program

=========

Could u tell me please ..what i mistake

thank u Grin

ZedZedNova

sr. member

Activity: 475

Merit: 265

Ooh La La, C'est Zoom!

Quote from: boymoku on July 26, 2016, 06:13:35 PM

Helo Everyone , I am new

Can I ask something , i have GekkoScience Compac BM1384

and How i use this with Window 7 64 Bit
and How can i run it ?

Thank u Grin

1. Read the first post of this thread.
2. keep reading following posts that answer questions
3. try what is suggested
4. If that still hasn't worked, keep reading more of the thread posts
5. After reading first few pages of posts in this thread Go back to #1

Pretty much everything you need to know is covered in the first few pages of this thread.

Cheers,

- zed

boymoku

newbie

Activity: 8

Merit: 0

Helo Everyone , I am new

Can I ask something , i have GekkoScience Compac BM1384

and How i use this with Window 7 64 Bit
and How can i run it ?

Thank u Grin

http://www.uppic.org/image-A28E_5797EF2C.jpg

MrBogy

newbie

Activity: 3

Merit: 0

Quote from: sidehack on July 25, 2016, 09:49:21 AM

I'm assuming you've looked into the thread enough to know there's a DLL missing from the Windows build that needs to be copied across from a stock cgminer archive?

Gadzooks! Foiled by my own poor eyesight!

A quick search solved my dilemma, and all is now well. As thanks for your quick reply, I'll donate the first few days of mining to the listed sandwich address, unless there's another one you prefer.

Topic: GekkoScience Compac BM1384 Stickminer Official Support Thread - page 28. (Read 268015 times)