GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 53.

Zminer777

member

Activity: 488

Merit: 37

Quote from: tastycakess on November 27, 2019, 01:12:17 AM

I think it's just his math is bad. I'm doing about 8.5g/s on gminer, I think it's just reporting hashes a minute not second. If you divide 8.5 by 60 you get .141 and my accepted speed is hovering around 0.145h/sec on the pool.

Miner display graph per second, pool display hashes per second. To compute one hash miner should find solution, to find solution miner need compute on average 42 graphs.
Thus H/s ~ G/s / 42

tastycakess

newbie

Activity: 4

Merit: 0

Quote from: arielbit on November 26, 2019, 06:36:35 PM

Quote from: tastycakess on November 26, 2019, 05:34:26 PM

Does anyone know why my Cortex hashrate differs so much? Tried out a few diff pools.

Gminer reports 6.5G/s but pool reports 0.125H/s. Does G stand for something I've never noticed before?

same here, cortex in gminer is broken.

maybe dev misplaced the 5% to the miner and 95% to the dev fee LOL Cheesy

I think it's just his math is bad. I'm doing about 8.5g/s on gminer, I think it's just reporting hashes a minute not second. If you divide 8.5 by 60 you get .141 and my accepted speed is hovering around 0.145h/sec on the pool.

arielbit

legendary

Activity: 3416

Merit: 1059

Quote from: tastycakess on November 26, 2019, 05:34:26 PM

Does anyone know why my Cortex hashrate differs so much? Tried out a few diff pools.

Gminer reports 6.5G/s but pool reports 0.125H/s. Does G stand for something I've never noticed before?

same here, cortex in gminer is broken.

maybe dev misplaced the 5% to the miner and 95% to the dev fee LOL Cheesy

tastycakess

newbie

Activity: 4

Merit: 0

Does anyone know why my Cortex hashrate differs so much? Tried out a few diff pools.

Gminer reports 6.5G/s but pool reports 0.125H/s. Does G stand for something I've never noticed before?

tromp

legendary

Activity: 990

Merit: 1108

Cuckarood29 will no longer be active on Grin's 2nd Hard Fork around Jan 15, 2020,
to be replaced by Cuckaroom29:

https://www.grin-forum.org/t/next-pow-cuckaroom-unveiled-at-grincon1

Cuckaroom miners can first be tested on floonet which hard forks around Dec 19.

SergVM

newbie

Activity: 4

Merit: 0

Gminer 1.81 (and 1.80) Cortex algo - periodically cycles with message "Connection Error: Write timed out". This message appears after the message "Connected to ....". Rebooting not changes anything. miner with 2 mining pools have the same issue. Another cortex miner have no those problem on these pools. Another grin 29 and 31 algos works without these issues. Where is the problem ?

Owletek

newbie

Activity: 3

Merit: 0

Thanks for new algo.

Pls whats performance for Cortex on 1070GTX?

Thanks

Zminer777

member

Activity: 488

Merit: 37

GMiner v1.81 available for download

v1.81
+ fixed bug with invalid worker name for cortex

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases/tag/1.81

Nairolf911

newbie

Activity: 25

Merit: 0

Hello,
Happy to mine cortex with gminer, but got "devfee mining pool are unavailable"...
That error stop the GPU, and restart the miner every minutes...
Could you solve fastly the problem ?

Saverenergy

full member

Activity: 728

Merit: 100

Quote from: 2h4u on November 26, 2019, 02:01:21 AM

Quote from: BradT on November 25, 2019, 06:19:51 PM

Quote from: Zminer777 on November 22, 2019, 07:45:04 AM

GMiner v1.79 available for download

Do -t for all cards in the rig please! Just "-t 75" for all cards.

Tired of making many almost identical bat-files with the same space separated numbers for each rig
-t 75 75 75 75 75 75 75 75 75 75 75 75 75 for 13-card rig
-t 75 75 75 75 75 75 for 6-card rig
-t 75 75 75 75 75 75 75 75 for 8-card rig
-t 75 75 75 75 75 75 75 75 75 75 75 for 11-card rig
(tired of reading?

) Imagine how we are tired of writing)

instead of just one universal bat-file with "-t 75" which sets temperature limits for all cards in the rig.

I wonder how you haven't done it for more than a year your miner exists

) Unbelievable. This is the oldest flaw GMiner has unresolved yet.

Second that. And there's a nifty workaround: you could use '-t 75 75 75 75 75 75 75 75 75 75 75 75 75' for any rig. Gminer always uses the right amount.

You all say correctly, but it’s much more convenient and logical to use one parameter "-t 75" for all video cards in rigs.

Zminer777

member

Activity: 488

Merit: 37

GMiner v1.80 available for download

v1.80
+ added Cortex algorithm for Nvidia GPUs
+ support more Ethash coins: Pirl, Callisto, Metaverse, Expanse

DevFee on Cortex algorithm is 5%

Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta

Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases/tag/1.80

AhmedMohamed875

newbie

Activity: 8

Merit: 0

Hello......................

Does your miner support beam hash II & equihash 192.7 for rx 5700 & rx 5700 xt ?, if so, what are the expected hash rates for both cards ?.
Thanks.

2h4u

newbie

Activity: 55

Merit: 0

Quote from: BradT on November 25, 2019, 06:19:51 PM

Quote from: Zminer777 on November 22, 2019, 07:45:04 AM

GMiner v1.79 available for download

Do -t for all cards in the rig please! Just "-t 75" for all cards.

Tired of making many almost identical bat-files with the same space separated numbers for each rig
-t 75 75 75 75 75 75 75 75 75 75 75 75 75 for 13-card rig
-t 75 75 75 75 75 75 for 6-card rig
-t 75 75 75 75 75 75 75 75 for 8-card rig
-t 75 75 75 75 75 75 75 75 75 75 75 for 11-card rig
(tired of reading?

) Imagine how we are tired of writing)

instead of just one universal bat-file with "-t 75" which sets temperature limits for all cards in the rig.

I wonder how you haven't done it for more than a year your miner exists

) Unbelievable. This is the oldest flaw GMiner has unresolved yet.

Second that. And there's a nifty workaround: you could use '-t 75 75 75 75 75 75 75 75 75 75 75 75 75' for any rig. Gminer always uses the right amount.

KartingProfi

newbie

Activity: 22

Merit: 0

Quote from: BradT on November 25, 2019, 06:19:51 PM

Do -t for all cards in the rig please! Just "-t 75" for all cards.

+1

BradT

newbie

Activity: 4

Merit: 0

Quote from: Zminer777 on November 22, 2019, 07:45:04 AM

GMiner v1.79 available for download

Do -t for all cards in the rig please! Just "-t 75" for all cards.

Tired of making many almost identical bat-files with the same space separated numbers for each rig
-t 75 75 75 75 75 75 75 75 75 75 75 75 75 for 13-card rig
-t 75 75 75 75 75 75 for 6-card rig
-t 75 75 75 75 75 75 75 75 for 8-card rig
-t 75 75 75 75 75 75 75 75 75 75 75 for 11-card rig
(tired of reading?

) Imagine how we are tired of writing)

instead of just one universal bat-file with "-t 75" which sets temperature limits for all cards in the rig.

I wonder how you haven't done it for more than a year your miner exists

) Unbelievable. This is the oldest flaw GMiner has unresolved yet.

io8621

member

Activity: 149

Merit: 11

Dual eth+ckb working on amd 4gb rx card?

Only ckb works good, but if try dual get card not supported or similar error.

With nbminer working good.

Try with 18.6.1 and 19.4.x driver without success.

somaton

jr. member

Activity: 211

Merit: 6

i think he means auto-update feature, something like in t-rex miner.

Saverenergy

full member

Activity: 728

Merit: 100

Quote from: ?? on ??

is any autoupdate command ?

What kind of updates are you talking about? The miner's development team regularly releases updates.

KartingProfi

newbie

Activity: 22

Merit: 0

We want to show strap command (as -strap 1 in ClayMore). No pill for GTX1070 Sad

UselessGuru

jr. member

Activity: 200

Merit: 3

When mining ethash or ethash+eaglehash on miningpool the miner aborts because of no available dev fee mining pools:

Code:

miner.exe --algo ethash+eaglesong --watchdog 0 --nvml 0 --cuda 1 --opencl 0 --api 4002 --server europe.ethash-hub.miningpoolhub.com:20565 --user ***********************.*********** --pass x --dserver ckb.2miners.com:6464 --duser ckb1qyq9v9yc2pmauycldz4e4ejuxdmvph0xpazq4nh3ph --dpass x --dual_intensity 5 --devices 0 --proto stratum
+----------------------------------------------------------------+
| GMiner v1.79 |
+----------------------------------------------------------------+
Algorithm: Ethash + Eaglesong
Stratum server:
  host: europe.ethash-hub.miningpoolhub.com:20565
  user: ***********************.***********
  password: x
Power calculator: on
Color output: on
Watchdog: off
API: http://127.0.0.1:4002
Log to file: off
Selected devices: GPU0
Intensity: 100
Temperature limits: 90C
------------------------------------------------------------------
02:32:47 [Ethash] Connected to europe.ethash-hub.miningpoolhub.com:20565
02:32:47 [Eaglesong] Connected to ckb.2miners.com:6464
02:32:47 [Ethash] Subscribed to Stratum Server
02:32:47 [Ethash] Set Nonce: 0d94
02:32:47 [Eaglesong] Subscribed to Stratum Server
02:32:47 [Eaglesong] Set Nonce: 000051e5
02:32:47 [Eaglesong] Authorized on Stratum Server
02:32:47 [Eaglesong] Set Target: 00000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52b
02:32:47 [Eaglesong] New Job: 737f
02:32:47 [Ethash] Authorized on Stratum Server
02:32:47 [Ethash] New Job: 88d Difficulty: 8.59G
02:32:47 Started Mining on GPU0: ASUS GeForce GTX 1080 Ti 11GB
02:32:47 [Ethash] GPU0: generating DAG for epoch #88
02:32:51 [Eaglesong] New Job: 7380
02:32:52 [Ethash] GPU0: DAG generated in 3.62s
02:32:56 [Ethash] New Job: 88e Difficulty: 8.59G
02:32:57 [Ethash] New Job: 88f Difficulty: 8.59G
02:33:01 [Eaglesong] New Job: 7381
02:33:07 All devfee mining pools are unavailable
02:33:07 Stopped Mining on GPU0

Mining on nicehash is fine:

Code:

miner.exe --algo ethash+eaglesong --watchdog 0 --nvml 0 --cuda 1 --opencl 0 --api 4002 --server daggerhashimoto.eu.nicehash.com:3353 --user *************************************.*********** --devices 0 --proto stratum --dpass x --dserver ckb.2miners.com:6464 --duser ckb1qyq9v9yc2pmauycldz4e4ejuxdmvph0xpazq4nh3ph
+----------------------------------------------------------------+
| GMiner v1.79 |
+----------------------------------------------------------------+
Algorithm: Ethash + Eaglesong
Stratum server:
  host: daggerhashimoto.eu.nicehash.com:3353
  user: *************************************.***********
  password: x
Power calculator: on
Color output: on
Watchdog: off
API: http://127.0.0.1:4002
Log to file: off
Selected devices: GPU0
Intensity: 100
Temperature limits: 90C
------------------------------------------------------------------
02:25:25 [Ethash] Connected to daggerhashimoto.eu.nicehash.com:3353
02:25:25 [Eaglesong] Connected to ckb.2miners.com:6464
02:25:25 [Ethash] Subscribed to Stratum Server
02:25:25 [Ethash] Set Nonce: 0bf755
02:25:25 [Eaglesong] Subscribed to Stratum Server
02:25:25 [Eaglesong] Set Nonce: 000051d6
02:25:25 [Eaglesong] Authorized on Stratum Server
02:25:25 [Eaglesong] Set Target: 00000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52b
02:25:25 [Eaglesong] New Job: 7354
02:25:25 [Ethash] Authorized on Stratum Server
02:25:25 [Ethash] New Job: 00000000f4f6a448 Difficulty: 8.59G
02:25:25 Started Mining on GPU0: ASUS GeForce GTX 1080 Ti 11GB
02:25:25 [Ethash] GPU0: generating DAG for epoch #299
02:25:27 [Ethash] New Job: 00000000f4f6aa1c Difficulty: 8.59G
02:25:27 [Eaglesong] New Job: 7355
02:25:27 [Ethash] New Job: 00000000f4f71eda Difficulty: 8.59G
02:25:32 [Eaglesong] New Job: 7356
02:25:35 [Ethash] GPU0: DAG generated in 7.40s
02:25:44 [Eaglesong] New Job: 7357
02:25:49 [Ethash] New Job: 00000000f4f895c5 Difficulty: 8.59G
02:25:49 [Ethash] New Job: 00000000f4f895cd Difficulty: 8.59G
+------+----+-------------------------+----------+-----+-----------+
| GPU Temp Speed Shares Power Efficiency |
+------+----+-------------------------+----------+-----+-----------+
| GPU0 N/A 30.59 MH/s + 606.61 MH/s 0/0 + 0/0 N/A N/A |
+------+----+-------------------------+----------+-----+-----------+

Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 53. (Read 306894 times)