Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 67. (Read 306918 times)
I vote that the dev adds memory strap timing option like in claymore
Just updated to 1_55 using BeamHash from 1_44. One of my 4x nVidia GPU rigs used to run fine with 2GB on Ubuntu 18.04 with swap but now persistently returns out of memory error for two cards. Is there anything that can be done? Anybody else have this issue?
Would increasing swappiness help with this?
Well, let me answer my own question, and the answer is yes.
BeamV2 gminer 1.55
1080 ~ 46-48sol
1080 ~ 46-48sol
Just updated to 1_55 using BeamHash from 1_44. One of my 4x nVidia GPU rigs used to run fine with 2GB on Ubuntu 18.04 with swap but now persistently returns out of memory error for two cards. Is there anything that can be done? Anybody else have this issue?
Would increasing swappiness help with this?
Guys, sorry for maybe dumb question, could you please help me with this error?https://s8.hostingkartinok.com/uploads/images/2019/08/d7a120896e0a1f913d106714f42f7099.jpg
Unknown OpenCL error -61
Unknown OpenCL error -61
BeamV2 has got a higher hash and more power consumption. You cant compare it with BeamV1.
Data of some of my rigs:
1070 120 Watt 31-35 Sol
1080 140 Watt 40-41 Sol
1080ti 220 Watt 54-56 Sol
2080 125 Watt 46-48 Sol
Wotan
Data of some of my rigs:
1070 120 Watt 31-35 Sol
1080 140 Watt 40-41 Sol
1080ti 220 Watt 54-56 Sol
2080 125 Watt 46-48 Sol
Wotan
True, i get the same hashes for our 1070 ( upto 35sol @110watt, depends on the card ), also the GTX 1660 ( non-Ti ) are beasts, upto 27sol for like 85w and around 55° stable
Our RX-580 cards get 16sol for 110w ( we dont keep em running btw ), they got replaced by 1660, but tested quickly for sharing here.
Thing is the rewards are not that much more at first sight tough ( tested @ leafpool ; Sparkpool ; 2miners ), ill keep it posted here as we are a bit further the coming days.
BeamV2 has got a higher hash and more power consumption. You cant compare it with BeamV1.
Data of some of my rigs:
1070 120 Watt 31-35 Sol
1080 140 Watt 40-41 Sol
1080ti 220 Watt 54-56 Sol
2080 125 Watt 46-48 Sol
Wotan
Data of some of my rigs:
1070 120 Watt 31-35 Sol
1080 140 Watt 40-41 Sol
1080ti 220 Watt 54-56 Sol
2080 125 Watt 46-48 Sol
Wotan
This 1.55 Gminer update seems a great hash improvement over the older one it seems ? ( quite alot on nVidia cards & a little bit on AMD cards )
Our nVidia cards went up more then 25% and AMD's 5%, i reckon those reports are valid ?
Compared to lolminer, etc. Gminer has a leap in front now it seems, nice job!
Our nVidia cards went up more then 25% and AMD's 5%, i reckon those reports are valid ?
Compared to lolminer, etc. Gminer has a leap in front now it seems, nice job!
Can anybody else confirm that?
hey there. Did everyone keep the same over/underclock settings as before the algo switch or did you find it better to switch them? Wondering what a good starting point would be?
This 1.55 Gminer update seems a great hash improvement over the older one it seems ? ( quite alot on nVidia cards & a little bit on AMD cards )
Our nVidia cards went up more then 25% and AMD's 5%, i reckon those reports are valid ?
Compared to lolminer, etc. Gminer has a leap in front now it seems, nice job!
Our nVidia cards went up more then 25% and AMD's 5%, i reckon those reports are valid ?
Compared to lolminer, etc. Gminer has a leap in front now it seems, nice job!
Just updated to 1_55 using BeamHash from 1_44. One of my 4x nVidia GPU rigs used to run fine with 2GB on Ubuntu 18.04 with swap but now persistently returns out of memory error for two cards. Is there anything that can be done? Anybody else have this issue?
Guys whats your hashrate on gtx 1080ti mining beam hash II?
I can only get around 54sols/s Share your hashrate guys just to clarify if my hashrate is slow with latest algo.
That's good speed for 1080ti,I am getting 50-55 depends on power limitI can only get around 54sols/s Share your hashrate guys just to clarify if my hashrate is slow with latest algo.
What do you think?
Guys whats your hashrate on gtx 1080ti mining beam hash II?
I can only get around 54sols/s Share your hashrate guys just to clarify if my hashrate is slow with latest algo.
That's good speed for 1080ti,I am getting 50-55 depends on power limitI can only get around 54sols/s Share your hashrate guys just to clarify if my hashrate is slow with latest algo.
What do you think?
Guys whats your hashrate on gtx 1080ti mining beam hash II?
I can only get around 54sols/s Share your hashrate guys just to clarify if my hashrate is slow with latest algo.
That's good speed for 1080ti,I am getting 50-55 depends on power limit I can only get around 54sols/s Share your hashrate guys just to clarify if my hashrate is slow with latest algo.
Anyone mind sharing their bat file for new BeamV2 config. NH preferably.
For NiceHash BEAMv2 bat files here: https://bytwork.com/news/nayshesh-add-beam
Guys whats your hashrate on gtx 1080ti mining beam hash II?
I can only get around 54sols/s Share your hashrate guys just to clarify if my hashrate is slow with latest algo.
I can only get around 54sols/s Share your hashrate guys just to clarify if my hashrate is slow with latest algo.
Created a video guide on using Gminer to mine Beam, including copy and paste configs for Windows and Linux Simple Miner smOS mining for anyone interested
https://youtu.be/oYiojyO5MZI
https://youtu.be/oYiojyO5MZI
Anyone mind sharing their bat file for new BeamV2 config. NH preferably.
I read somewhere that for the autoswitch to work, these parameters should be set, can somebody confirm please:--algo BeamHash --pers Beam-PoW
Anyone mind sharing their bat file for new BeamV2 config. NH preferably.
Beam hardfork is not yet done look at the countdown from here https://www.coingecko.com/en/explain/beam_hard_forkSo no one can gives you Beamv2 config.
But thanks for reminding me because I forgot to transfer my beam coins to the wallet for the hard fork.
Anyone mind sharing their bat file for new BeamV2 config. NH preferably.
Jump to: