Would it be possible to reduce ram requirements for AE
https://forum.aeternity.com/t/cuckoo-cycle-gpu-memory-requirements/1608/21
Topic: GMiner v3.24 Ergo+KASPA+ZIL/KAWPOW/Equihash/Cortex - page 90. (Read 306918 times)
still much slower than bminer. It also keep CPU at 100% for rigs with many GPUs (12x or 13x gtx1070 in my case, G3930 cpu) which seems to limit hashrate a lot. bminer doesn't have this problem
Real question is, is it finally faster than bminer or not for grin?
compare on pool side 
Real question is, is it finally faster than bminer or not for grin?
Power consumption has become very spiky in 1.35 mining g29 eg: GTX1070s draw from 70 to 140Wt with fixed clock speed. Pretty sure its unhealthy.. Same goes for 1080\ti, just numbers are higher.
Interesting release that makes me lose 50% hashrate (2080 ti from 10 gps to 5)... Not convinced 
may be you have to adjust power limit?
Interesting release that makes me lose 50% hashrate (2080 ti from 10 gps to 5)... Not convinced
Cool, now there is 0.5Mhs on GTX1080 like on GTX1070\1080ti))
GMiner v1.35 available for download
v1.35
+ improved performance for Grin29 and Swap on Nvidia cards
+ support AMD cards for Grin29, Swap and Aeternity
+ improved pool side hashrate for Swap
+ various bug fixes
Performance on stock GPU settings:
Cuckaroo29/Cuckaroo29s:
Palit GTX 1060 JetStream 6GB ~3 G/s
Palit GTX 1070 Ti JetStream 8GB ~5.05 G/s
MSI GTX 1080 SEA HAWK EK X 8GB ~5.3 G/s
Gigabyte GTX 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~7.7 G/s
MSI RTX 2070 Armor 8GB ~7.1 G/s
MSI RTX 2080 DUKE 8GB ~8.6 G/s
PowerColor RX580 Red Devil 8GB ~1.75 G/s (2 G/s on ROCm)
Sapphire VEGA 56 8GB ~3.2 G/s
MSI VEGA 64 8GB ~3.85 G/s (4.05 on ROCm)
Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta
Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases
v1.35
+ improved performance for Grin29 and Swap on Nvidia cards
+ support AMD cards for Grin29, Swap and Aeternity
+ improved pool side hashrate for Swap
+ various bug fixes
Performance on stock GPU settings:
Cuckaroo29/Cuckaroo29s:
Palit GTX 1060 JetStream 6GB ~3 G/s
Palit GTX 1070 Ti JetStream 8GB ~5.05 G/s
MSI GTX 1080 SEA HAWK EK X 8GB ~5.3 G/s
Gigabyte GTX 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~7.7 G/s
MSI RTX 2070 Armor 8GB ~7.1 G/s
MSI RTX 2080 DUKE 8GB ~8.6 G/s
PowerColor RX580 Red Devil 8GB ~1.75 G/s (2 G/s on ROCm)
Sapphire VEGA 56 8GB ~3.2 G/s
MSI VEGA 64 8GB ~3.85 G/s (4.05 on ROCm)
Telegram group: https://t.me/gminer_equihash
Telegram beta test group: https://t.me/gminer_beta
Download links:
GitHub: https://github.com/develsoftware/GMinerRelease/releases
well here's my results afrer around 24hours (i was doing 1-1.5 hour diagnostics and windows cleaning yesterday, so i added extra 1-1.5 hours) of mining:
https://i.imgur.com/dHnyy2F.png
https://i.imgur.com/wgi20o6.png
average hasrate was around 25g/sec (miner showed around 28g/sec), even with 25g/sec it made around 41 SWP after 24 hours of mining, if there's some bug that needs to be fixed i think pool hashrate should increase in later builds, does SwapReferenceMiner v1.2.0 have 25g/sec or makes more swapcoins daily?, i think even with 25g/sec gminer is faster, if there's some newer gminer beta build with better C29S hashrate i can gladly test it on my rig, as i understand there's only two available working miners at the moment for C29S and swapcoin mining, Gminer 1.34 and SwapReferenceMiner v1.2.0
https://i.imgur.com/dHnyy2F.png
https://i.imgur.com/wgi20o6.png
average hasrate was around 25g/sec (miner showed around 28g/sec), even with 25g/sec it made around 41 SWP after 24 hours of mining, if there's some bug that needs to be fixed i think pool hashrate should increase in later builds, does SwapReferenceMiner v1.2.0 have 25g/sec or makes more swapcoins daily?, i think even with 25g/sec gminer is faster, if there's some newer gminer beta build with better C29S hashrate i can gladly test it on my rig, as i understand there's only two available working miners at the moment for C29S and swapcoin mining, Gminer 1.34 and SwapReferenceMiner v1.2.0
gminer please fix hashrate report, it reports 10-15% more than on pool side on at least 5 different machines and with no rejects and good connection.
don't forget there's dev fees, but it shouldnt be 10%
Could you raise the intensity of Grin29 for GTX 1060 6GB? It seems now pretty low as I may judge by the GPU temperature...
i think even pool is showing wrong average hashrate since i already made 2 swp in 1 hours time
https://i.imgur.com/ffzQgXL.png
lets see if i reach 50 swp in 24 hours, or at least 45
you can not say from 2 hrs, pool may be just lucky during this time. Wait for >24 hrs and report i have 10-15% less rate on pool on every machine and discussed this with pool owners. No such problem with reverenceswap miner
gminer please fix hashrate report, it reports 10-15% more than on pool side on at least 5 different machines and with no rejects and good connection.
Are there expected hash rate upgrades/improvements for 144_5 coming soon? Thanks.
well i started mining swap on swap.ingest.cryptoknight.cc and first impressions is quite good, it has same 27.8-28g/sec in miner, while in pool it needs some time to reach maximum amount, but i already made 1 coin in 30 minutes, i use hotdex.eu swp wallet and already received first payment, swp volume is good as well to exchange it for bitcoin
https://i.imgur.com/gGggO2W.png
i will post pool hashrates later after 1-2 hour mining, i'm using exact same oc settings with TDP 70% and pill and it uses same amount of pagefile as mtp, C29 and Cuckoo29 algos, for my 5 GPU rig it is around 32gb and i have around 10gb free space left on 55gb windows 10 1709 partition (it is crap free enterprise build)
mining temps are also same:
https://i.imgur.com/NWr3syK.png
i think even pool is showing wrong average hashrate since i already made 2 swp in 1 hours time
https://i.imgur.com/ffzQgXL.png
lets see if i reach 50 swp in 24 hours, or at least 45
https://i.imgur.com/gGggO2W.png
i will post pool hashrates later after 1-2 hour mining, i'm using exact same oc settings with TDP 70% and pill and it uses same amount of pagefile as mtp, C29 and Cuckoo29 algos, for my 5 GPU rig it is around 32gb and i have around 10gb free space left on 55gb windows 10 1709 partition (it is crap free enterprise build)
mining temps are also same:
https://i.imgur.com/NWr3syK.png
i think even pool is showing wrong average hashrate since i already made 2 swp in 1 hours time
https://i.imgur.com/ffzQgXL.png
lets see if i reach 50 swp in 24 hours, or at least 45
i will wait for fix then, meanwile i will use 1.34 gminer build for mining swap, since SwapReferenceMiner-1.2.0 has much lower hashrate than gminer, i will report pool average hashrate after few hours of mining
check nvidia-smi output
Sorry, it was an old GPU-Z version issue... Rly?
check nvidia-smi output When I mine Grin29 on 1060 6GB under Win7 only 1,5 of video RAM are taken. And it seems that the intensity is pretty low... Is it normal?
seems you mine not with GMiner, because GMiner minimum requires 5.5GB VRAM for Grin29 Jump to: