Topic: 🚀🚀🚀🚀 | GorillaBucks | Custom Multipool LIVE | Social Media Network | 💵🐵💵 - page 47. (Read 133306 times)
June 29, 2015, 07:26:07 PM
Not trying to make band setup hard - used 1 click button and get an error msg.
June 29, 2015, 07:17:11 PM
Now that my coins went from stake to balance will the automatically go back into stake? Now do I send them to myself in smaller chuckes? What is the strategy that you would like to share to current and future cloud staking clients?
I am playing with the coin control feature to split my coins up in smaller chucks. It's kind of tedious though, so haven't split them up into 1 coin inputs, yet. But I'm slowly working on it. ( I have over 2000 coins.) Your coins will be eligible to stake again in four hours after they return.
June 29, 2015, 07:14:47 PM
Trying to set up local band and get the error msg: The local ip is not yet detected.
Is there an easy work around?
I know my local ip - I can try the local button but what would I
put in for the port?
It's a "one click setup." Why you making this so hard? Is there an easy work around?
I know my local ip - I can try the local button but what would I
put in for the port?
June 29, 2015, 07:12:04 PM
Now that my coins went from stake to balance will the automatically go back into stake? Now do I send them to myself in smaller chuckes? What is the strategy that you would like to share to current and future cloud staking clients?
June 29, 2015, 07:09:54 PM
How do we transfer our gorilla buck stake address to the new Bucks
June 29, 2015, 07:00:10 PM
June 29, 2015, 06:57:57 PM
All requested coins have been sent out. If you have tried to swap your coins and requested it properly, you have all your coins
NOTE: I am not using private messages. You must use [email protected]
NOTE: I am not using private messages. You must use [email protected]
June 29, 2015, 06:48:09 PM
Thanks AngelLox.. I should have thought of that. Too early in the morning... Now I got this error during the make process:
/usr/bin/ld: cannot find -lsecp256k1
collect2: error: ld returned 1 exit status
Makefile:573: recipe for target 'GorillaBucks-qt' failed
make: *** [GorillaBucks-qt] Error 1
You're missing a dependency/usr/bin/ld: cannot find -lsecp256k1
collect2: error: ld returned 1 exit status
Makefile:573: recipe for target 'GorillaBucks-qt' failed
make: *** [GorillaBucks-qt] Error 1
Code:
secp256k1 Instructions
git clone https://github.com/bitcoin/secp256k1
cd secp256k1
./autogen.sh
./configure
make
sudo make install
June 29, 2015, 06:47:27 PM
I see we are already approaching 50 GorillaBand Masternodes. That's nearly 25% of the entire coin supply not even trying to sell 
Only 12k bucks on the exchange as well, that's only enough for 2 more masternodes
June 29, 2015, 06:45:24 PM
TY
June 29, 2015, 06:45:02 PM
Where should conf go - in GorillaBucks raoming?
Yep, as GorillaBucks.conf
June 29, 2015, 06:43:51 PM
Where should conf go - in GorillaBucks raoming?
June 29, 2015, 06:38:00 PM
Trying to set up local band and get the error msg: The local ip is not yet detected.
Is there an easy work around?
I know my local ip - I can try the local button but what would I
put in for the port?
Is there an easy work around?
I know my local ip - I can try the local button but what would I
put in for the port?
This is from IGotSpots earlier
Make a conf and use
externalip=yourip
https://bitcointalksearch.org/topic/m.11747778
port might be 36480?
June 29, 2015, 06:10:55 PM
Trying to set up local band and get the error msg: The local ip is not yet detected.
Is there an easy work around?
I know my local ip - I can try the local button but what would I
put in for the port?
Is there an easy work around?
I know my local ip - I can try the local button but what would I
put in for the port?
June 29, 2015, 06:00:45 PM
cd /home/pi/GorillaBucks/src/leveldb && CC=gcc CXX=g++ make OPT="-pipe -fstack-protector-all --param ssp-buffer-size=1 -DUSE_SECP256K1 -O2" libleveldb.a libmemenv.a
make[1]: Entering directory '/home/pi/GorillaBucks/src/leveldb'
/bin/sh: 1: ./build_detect_platform: Permission denied
Makefile:18: build_config.mk: No such file or directory
make[1]: *** No rule to make target 'build_config.mk'. Stop.
make[1]: Leaving directory '/home/pi/GorillaBucks/src/leveldb'
Makefile:732: recipe for target '/home/pi/GorillaBucks/src/leveldb/libleveldb.a' failed
make: *** [/home/pi/GorillaBucks/src/leveldb/libleveldb.a] Error 2
Using a Pi2... Thanks for any help!
Find the directory of /Gorillabucks/src/leveldb/build_detect_platform andmake[1]: Entering directory '/home/pi/GorillaBucks/src/leveldb'
/bin/sh: 1: ./build_detect_platform: Permission denied
Makefile:18: build_config.mk: No such file or directory
make[1]: *** No rule to make target 'build_config.mk'. Stop.
make[1]: Leaving directory '/home/pi/GorillaBucks/src/leveldb'
Makefile:732: recipe for target '/home/pi/GorillaBucks/src/leveldb/libleveldb.a' failed
make: *** [/home/pi/GorillaBucks/src/leveldb/libleveldb.a] Error 2
Using a Pi2... Thanks for any help!
sudo chmod 777 /build_detect_platform
If you wait a sec i'll check out my pi and tell you the exact directory.
Edit: just do sudo chmod 777 /home/pi/Gorillabucks/src/leveldb/build_detect_platform
Thanks AngelLox.. I should have thought of that. Too early in the morning... Now I got this error during the make process:
/usr/bin/ld: cannot find -lsecp256k1
collect2: error: ld returned 1 exit status
Makefile:573: recipe for target 'GorillaBucks-qt' failed
make: *** [GorillaBucks-qt] Error 1
June 29, 2015, 05:52:36 PM
I'm at work right now n didn't read the last two pages to see if ne one else asked. Anyway, I have three clients, two bands n regular node. The regular node I use to check the band list n I'm not seein my two bands. Is it bec the wallets aren't locked which is allowing open staking ?
Hope that made sense... ty.
Hope that made sense... ty.
June 29, 2015, 05:38:01 PM
how do synchro teeth wallet? Any nodes? I have to get teeth of bittrex exchange
Go back to page 97 and start reading
June 29, 2015, 05:35:36 PM
I see we are already approaching 50 GorillaBand Masternodes. That's nearly 25% of the entire coin supply not even trying to sell
June 29, 2015, 05:33:48 PM
how do synchro teeth wallet? Any nodes? I have to get teeth of bittrex exchange
June 29, 2015, 05:23:17 PM
Just so you guys know, GorillaBucks6480 is now active on GorillaEx, c-cex, and CoinPayments
Speaking of CoinPayments, GorillaStake.com payment options are now BTC, BUCKS, and PayPal for Cloud Staking
read this post https://bitcointalksearch.org/topic/m.11739778
Jump to: