Topic: [GPUC] GPU Coin | Mandatory Wallet Update - page 214. (Read 421421 times)
why so few 1 GPUcoin per block
I tried another pool. is it samething.
I still cannot login.
I got this msg:
You are mining GPUCOIN now ! Look in Getting Started for help
Did you create a worker on the pool?I still cannot login.
I got this msg:
You are mining GPUCOIN now ! Look in Getting Started for help
Or maybe you have to check your mail for verification....
vertminer.exe -o stratum+tcp://gpu.suprnova.cc:4444 -u Weblogin.Worker -p Worker password
I always got an error " error -4"
I always got an error " error -4"
try vertminer.exe --scrypt-vert -o stratum+tcp://gpu.suprnova.cc:4444 -u Weblogin.Worker -p Worker password
WHy is nobody mining in these pools? is this the actual coin?
Dont want to waste my hash
Dont want to waste my hash
So this is my first time using vertminer and I can not get it to work. In ubuntu 13.10 with the 14.2 cata drivers. Cgminer 3.7.1 and 3.7.3 (keccak build) run fine.
I setup the vertminer the same way i setup 3.7.3 and the configure comes back looking good. I can't get it to mine though...
Here's how I'm starting it up...
That gives me a supposed 680Mh/s and no accepted shares (although it doesn't say reject either). I couldn't find a specfic flag for the scrypt n algo so I tried to add in the standard scrypt flag (--scrypt). When I do that it does the completle opposite, bumping down my supposed hash to 11Kh/s and droping the load on the GPU quite a bit as well. I also start getting straight rejects as well.
No matter what I do my miners in the pool website never show as being connected either.
Any suggestions?
Highlighted area tells me you're using the wrong miner. Should be kh/s for this coinI setup the vertminer the same way i setup 3.7.3 and the configure comes back looking good. I can't get it to mine though...
Here's how I'm starting it up...
Code:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
./vertminer -o stratum+tcp://east1.us.stratum.dedicatedpool.com:3367 -u username.1 -p x -d 1
That gives me a supposed 680Mh/s and no accepted shares (although it doesn't say reject either). I couldn't find a specfic flag for the scrypt n algo so I tried to add in the standard scrypt flag (--scrypt). When I do that it does the completle opposite, bumping down my supposed hash to 11Kh/s and droping the load on the GPU quite a bit as well. I also start getting straight rejects as well.
No matter what I do my miners in the pool website never show as being connected either.
Any suggestions?
I don't think so. I'm using this...
https://github.com/Bufius/vertminer-gpu
I believe the switch you are looking for is --scrypt-vert, as so: vertminer.exe --scrypt-vert -o 127.0.0.1:6857 -u user -p x
this worked well for my 280x's: http://cryptojournal.blogspot.sg/2014/03/latest-sgminer-compiled-from-veox.html
I tried another pool. is it samething.
I still cannot login.
I got this msg:
You are mining GPUCOIN now ! Look in Getting Started for help
I still cannot login.
I got this msg:
You are mining GPUCOIN now ! Look in Getting Started for help
If you are on windows you dont. Linux is all good on 2GB, Great on 4GB,[10%improv] Perfect on 8GB[extra 5% improv]
{
"pools" : [
{
"url" : "url",
"user" : "",
"pass" : ""
}
]
,
"intensity" : "13",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"temp-cutoff" : "80",
"expiry" : "30",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"device" : "0",
"shaders" : "1200",
"scrypt-vert" : true
}
Still getting error and GPU DISABLED right after launch..
How much system ram do you have? Also, why do you have your shaders command set for 1200 on a 280X card?
Who me?
I got 2gb and I set 2048 originally.
Anyway the exact error is "Error-4: Enqueueing kernel onto command queue"
You don't have enough system ram to run Scrypt-N!
I can't seem to get VertMiner (official version) to work...
I get error and GPU disabled as soon as I launch it.
What am I doing wrong guys?
Thanks.
Try thisI get error and GPU disabled as soon as I launch it.
What am I doing wrong guys?
Thanks.
{
"pools" : [
{
"url" : "url",
"user" : "",
"pass" : ""
}
]
,
"intensity" : "13",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"temp-cutoff" : "80",
"expiry" : "30",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"device" : "0",
"shaders" : "1200",
"scrypt-vert" : true
}
Still getting error and GPU DISABLED right after launch..
How much system ram do you have? Also, why do you have your shaders command set for 1200 on a 280X card?
Who me?
I got 2gb and I set 2048 originally.
Anyway the exact error is "Error-4: Enqueueing kernel onto command queue"
You don't have enough system ram to run Scrypt-N!
what do I suppose to do when I cannot get in?
Try another pool.
http://gpuc.allpoolz.com
- Always 0% mining fees!
- Miner Notifications
- Port 8080 mining
- VARDIFF
- Stratum
- DDoS Protection
- Database off-loading (faster more reliable)
- Ticket support
- US Server
- SSL
Pool is crunching away.
what do I suppose to do when I cannot get in?
can you guys go inside the https://gpu.suprnova.cc/index.php?
cause no matter I do. I cannot get inside it.
Yes cause no matter I do. I cannot get inside it.
lol ETA changed from 3AM to 2PM Sunday... That's almost a 12 hour difference.
They originally said it would be 24 hours after the soft launch, + or - 8 hours. As network hash rate increases coin trys to keep balance, but the actual ETA is block 2601. We are at 993 right now.
No, I understasnd. I'm just
at the big swing in blocks per minute. I thought the it adjusting quickly would result in a consistent 60 seconds per block.
can you guys go inside the https://gpu.suprnova.cc/index.php?
cause no matter I do. I cannot get inside it.
cause no matter I do. I cannot get inside it.
lol ETA changed from 3AM to 2PM Sunday... That's almost a 12 hour difference.
They originally said it would be 24 hours after the soft launch, + or - 8 hours. As network hash rate increases coin trys to keep balance, but the actual ETA is block 2601. We are at 993 right now.
if we follow the block finding pattern it will be around 4 oclock pacific
I tried a lot of ways.
reboot and the mining rig. same error
resign with other email. same error.
how do I suppose to go inside the site?
reboot and the mining rig. same error
resign with other email. same error.
how do I suppose to go inside the site?
I'm only getting like 22khash with my AMD Radeon 6850 cant figure out the right setting for the life of me, finally stopped crashing, though!
lol ETA changed from 3AM to 2PM Sunday... That's almost a 12 hour difference.
Ive solomined 8 GPU, and on xhash I have another 23 coins... xhash is the way to go obviously!
What, you wanted to buy some? There are some for sale at Atomic-Trade already!
What, you wanted to buy some? There are some for sale at Atomic-Trade already!
How much they pay you to promote them ?
Jump to: