[GPUC] GPU Coin | Mandatory Wallet Update - page 218.

byteflush

full member

Activity: 154

Merit: 100

Quote from: bitchallenged on March 08, 2014, 08:24:32 PM

Quote from: byteflush on March 08, 2014, 08:20:00 PM

Quote from: bitchallenged on March 08, 2014, 08:18:02 PM

Quote from: kidyubyub on March 08, 2014, 08:14:10 PM

Quote from: bitchallenged on March 08, 2014, 08:10:13 PM

If I were a gpucoin.conf file where would I save myself to?

Right next to the bacon.... MMmmmmmmm.... bacon.

If you are in Windows, user folder/appdata/roaming/gpucoin

You have to unhide the folders first.

Thanks, do I need to have vertminer saved to the same folder?

I have the conf file in the gpucoin location, but when I start the vertminer the vertminer.conf file takes over and points to a pool.

The .conf for vertminer should be in the same location as vertminer.exe, wherever that may be (C:\vert or something like that). You can specify which pool you want to mine at within the vertminer.conf

Thanks I was trying to mine solo, but I can't seem to launch vertminer to do this, am using the following as the conf file in gpucoin appdata folder:

rpcuser=y
rpcpassword=x
rpcallowip=localhost
rpcport=3344
gen=0
server=1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Do I need to instead put that in the vertminer folder or is there something I am missing?

Nope, but there should be vertminer.conf file in the folder where vertminer.exe is located. I don't know what's the best setting for your GPU, but I can paste an example, if you can't find the file.

Edit: Also, do change rpcallowip to 127.0.0.1
And perhaps add daemon=1

lemfuture

hero member

Activity: 686

Merit: 500

Quote from: LuckyLuke on March 08, 2014, 08:25:37 PM

Quote from: lemfuture on March 08, 2014, 08:25:02 PM

getting lots of hw error.. whats the right parameter for r9 290?

intensity should not go higher then 13 or else you get hw errors

my intensity is 13, still getting hw

LuckyLuke

newbie

Activity: 56

Merit: 0

Quote from: lemfuture on March 08, 2014, 08:25:02 PM

getting lots of hw error.. whats the right parameter for r9 290?

intensity should not go higher then 13 or else you get hw errors

lemfuture

hero member

Activity: 686

Merit: 500

getting lots of hw error.. whats the right parameter for r9 290?

bitchallenged

newbie

Activity: 44

Merit: 0

Quote from: byteflush on March 08, 2014, 08:20:00 PM

Quote from: bitchallenged on March 08, 2014, 08:18:02 PM

Quote from: kidyubyub on March 08, 2014, 08:14:10 PM

Quote from: bitchallenged on March 08, 2014, 08:10:13 PM

If I were a gpucoin.conf file where would I save myself to?

Right next to the bacon.... MMmmmmmmm.... bacon.

If you are in Windows, user folder/appdata/roaming/gpucoin

You have to unhide the folders first.

Thanks, do I need to have vertminer saved to the same folder?

I have the conf file in the gpucoin location, but when I start the vertminer the vertminer.conf file takes over and points to a pool.

The .conf for vertminer should be in the same location as vertminer.exe, wherever that may be (C:\vert or something like that). You can specify which pool you want to mine at within the vertminer.conf

Thanks I was trying to mine solo, but I can't seem to launch vertminer to do this, am using the following as the conf file in gpucoin appdata folder:

rpcuser=y
rpcpassword=x
rpcallowip=localhost
rpcport=3344
gen=0
server=1
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

Do I need to instead put that in the vertminer folder or is there something I am missing?

sgi02

sr. member

Activity: 542

Merit: 250

Received my first GPUcoin! Thanks to whomever was kind enough to help get me started

ByronP

hero member

Activity: 599

Merit: 510

As promised Atomic Trade has added GPU... Atomic-Trade.com

byteflush

full member

Activity: 154

Merit: 100

Quote from: goodluck0319 on March 08, 2014, 08:18:55 PM

shall i copy the config stuff on the first page?

rpcuser=rickyman
rpcpassword=yoursupersecretpassword
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

That's for gpucoin.conf in roaming folder, it doesn't have anything to do with the miner. And this is one of the few coins that worked fine (for me) without editing the .conf. My guess would be, no - you don't have to copy it, but I'm still waiting to see if my wallet works without those nodes.

amdfxman1701

sr. member

Activity: 367

Merit: 250

Gaxo5ZeWZ2pBKUBecGycM2WiCwmWswkBzr

Some love for a guy with poor hash power? Embarrassed

micryon

full member

Activity: 154

Merit: 100

Quote from: sgi02 on March 08, 2014, 08:18:21 PM

Single card miner here, getting (Share is above target) quite a bit, but im guessing that its due to the low initial block reward? In any event, im looking forward to this new coin and hoping I might be able to get a new GPU!

Any help would really be appreciated! Thanks!

GgnrsQRRsjRVXjheEKXKMfBXJc4wkbUwha

Sent!

988dc54a71541a7d87716241b07d4fa7f3ff2188dab98534d5ef25b17231bff9

okay.. thats it i'm all out folks.. first 16 coins to be mined (or give or take.. )

jimlite

legendary

Activity: 1848

Merit: 1018

Can I also please get a test coin?

GYRzmSL3FYu8gNdUfn28TT7BNGnQkrn9wr

Also, how are people getting 375 kh/s on 280xs?
My asus gets like 330?

byteflush

full member

Activity: 154

Merit: 100

Quote from: bitchallenged on March 08, 2014, 08:18:02 PM

Quote from: kidyubyub on March 08, 2014, 08:14:10 PM

Quote from: bitchallenged on March 08, 2014, 08:10:13 PM

If I were a gpucoin.conf file where would I save myself to?

Right next to the bacon.... MMmmmmmmm.... bacon.

If you are in Windows, user folder/appdata/roaming/gpucoin

You have to unhide the folders first.

Thanks, do I need to have vertminer saved to the same folder?

I have the conf file in the gpucoin location, but when I start the vertminer the vertminer.conf file takes over and points to a pool.

The .conf for vertminer should be in the same location as vertminer.exe, wherever that may be (C:\vert or something like that). You can specify which pool you want to mine at within the vertminer.conf

goodluck0319

sr. member

Activity: 420

Merit: 250

shall i copy the config stuff on the first page?

rpcuser=rickyman
rpcpassword=yoursupersecretpassword
addnode=188.226.166.12
addnode=107.170.227.7
addnode=188.226.169.204
addnode=128.199.220.62
addnode=107.170.36.126

sgi02

sr. member

Activity: 542

Merit: 250

Single card miner here, getting (Share is above target) quite a bit, but im guessing that its due to the low initial block reward? In any event, im looking forward to this new coin and hoping I might be able to get a new GPU!

Any help would really be appreciated! Thanks!

GgnrsQRRsjRVXjheEKXKMfBXJc4wkbUwha

bitchallenged

newbie

Activity: 44

Merit: 0

Quote from: kidyubyub on March 08, 2014, 08:14:10 PM

Quote from: bitchallenged on March 08, 2014, 08:10:13 PM

If I were a gpucoin.conf file where would I save myself to?

Right next to the bacon.... MMmmmmmmm.... bacon.

If you are in Windows, user folder/appdata/roaming/gpucoin

You have to unhide the folders first.

Thanks, do I need to have vertminer saved to the same folder?

I have the conf file in the gpucoin location, but when I start the vertminer the vertminer.conf file takes over and points to a pool.

dbt1033

legendary

Activity: 1274

Merit: 1000

GPU Coin is now traded @ ATOMIC-TRADE !!!

With ATOMIC-TRADING ENGINE, a fast unique trading algorithm.

The site is fast, secure, and only requires 3 confirms for btc deposits.

In fact, Atomic-Trade has the ability to instantly scale to handle nearly limitless volumes! (trades are always instant/the site will never go down)

Atomic-Trade, LLC is FINCEN Compliant and offers USD/BTC markets (Fast ID verification).

We have a fully operational, constantly moderated trollbox.

Come check us out!

Article explaining Atomic-Trade/Atomic trading engine: Pitch-Engine

As you can see, your coins are safe with Atomic-Trade.

Tired of sites that lose your money? Tired of your orders losing priority? Tired of trade delays? Tired of poor customer support?

Make the switch today. Don't just trade. ATOMIC-TRADE

byteflush

full member

Activity: 154

Merit: 100

Quote from: byteflush on March 08, 2014, 08:02:52 PM

By the way, can someone send me any amount of GPUC to test my wallet: GSA2aesx9fyuFcmJ2RkvHczBn7QepSNn9x
Thanks in advance, I will return the payment if you want.

I still received none in my wallet, would appreciate it if someone sent at least 0.001 GPUC or something like that.

@goodluck0319
You should have vertminer.conf in the same folder from where you start the miner (at least on Windows).

micryon

full member

Activity: 154

Merit: 100

Quote from: FrankieSaysRelax on March 08, 2014, 08:13:37 PM

if anybody can send me a coin for test, will send you back 2 after block 2600 hits.

GNCa9PBXJnrtyqnBCgXsTij9ykcYBgpp3G

Sent!

7653068a814e1ae0f4a27b9d764b20394d6922a5f27e2b73dc4c2747b6ada4f2

goodluck0319

sr. member

Activity: 420

Merit: 250

i have 2 x 290 (non x) and i don't have any config file.

do i need one?

tabnk

full member

Activity: 140

Merit: 100

Gdf7KAx7QhmJ6jFguBeicrpA6nNrJZ1dUL

Wink

Topic: [GPUC] GPU Coin | Mandatory Wallet Update - page 218. (Read 421421 times)