An i right that the block will not half for 173 days? i did not see anything about a quicker reduction in rewards but i maybe missed it...
173 days for 250k blocks ?
Maybe around 30/40 in a couple weeks providing no stupid dumps then
Topic: [GPUC] GPU Coin | Mandatory Wallet Update - page 405. (Read 421421 times)
173 days for 250k blocks ?
Maybe around 30/40 in a couple weeks providing no stupid dumps then
Someone should make Cuda coin that gives Nvidia upper hand. Would be unique and drastically change the view on GPU mining hardware.
Please research Nvidia Maxwell 750ti. Nvidia just gained the upper hand.
We need some some good pools instead of these random pools (where you have a better chance of getting ripped off)
Can anyone contact some of the major/popular pool operators and see if we can get this coin on there. I would feel 100x better mining on a pool that I can trust instead of these brand new pool websites and have my coins stolen from me.
Can anyone contact some of the major/popular pool operators and see if we can get this coin on there. I would feel 100x better mining on a pool that I can trust instead of these brand new pool websites and have my coins stolen from me.
Any prediction how much per coin would cost after two weeks?
Based on the IPO the current value set would be .00000022BTC per GPUC. Auction could tell us if there is greater interest, but people just didnt see the IPO...
Based on Max supply it would be reasonable to say in the 150/200 sat range once block reward halves
please give settings for 270x cards...
IPOs, speak up about the exchanges. Our CEO listens to the community as we have seen. I say, lets wait until the store opens before we hit the exchanges and let's go for the big exchanges. Not the little ones that have been losing peoples coins or charging to be on it.
Quote me and agree or disagree. Let's keep this going so the CEO sees it! This is going to be the hottest coin launched in a while.
I'd like to visit one of these pools where they actually acknowledged it is a script-n coin. I can see it now.... I get set up with one of them and they aren't ready and I miss out.
We have a news post showing how to mine Scrypt-N. I'm not sure if that's what you're looking for, though. Our stratum is set up for Scrypt-N. We were testing it last night with Vertcoin.
I have 4 x 6970's that I can't get to mine correctly. My other machine has two 6970's and it's mining fine at 550 kh/s (275kh/s per card).
Is Scrypt-N dependant on system ram or GPU ram? The four card machine has 4GB in it and the 2 card machine has 8GB. Suggestions?
Code working good with 2 cards, but not 4.
Is Scrypt-N dependant on system ram or GPU ram? The four card machine has 4GB in it and the 2 card machine has 8GB. Suggestions?
Code working good with 2 cards, but not 4.
Code:
"intensity" : "18",
"worksize" : "256",
"lookup-gap" : "2",
"thread-concurrency" : "8000",
"temp-cutoff" : "90",
"expiry" : "30",
"log" : "5",
"queue" : "0",
"scan-time" : "1",
"device" : "0",
"shaders" : "1536",
"scrypt-vert" : true
}
this sucks when i invested as IPO it said this would be a scrypt coin :s im using a lot of 6950's with 450khs+ but they only do 150 khs on n scrypt this is not fair =(
And everybody else's hashrates are lower as well. What's the problem?
Before attempting anything you need to get a custom miner for Scrypt-N.
=> http://vertcoin.org/#mining
It works the same way as classic miners, input your info in the conf file or directly in the bat file.
CAUTION: the Vertminer on this page comes with a default .conf file, delete it if you put all your settings in the .bat file!
The settings are different than on classic Scrypt for most cards and you need 8GB of system RAM for best results if you have multiple cards. Here are some .bat settings that work for me:
280X at about 370KH/s (8GB System RAM):
HD7950 at about 315KH/s (12GB System RAM):
If you think this was useful to you consider mining for me while you test your optimal settings
=> http://vertcoin.org/#mining
It works the same way as classic miners, input your info in the conf file or directly in the bat file.
CAUTION: the Vertminer on this page comes with a default .conf file, delete it if you put all your settings in the .bat file!
The settings are different than on classic Scrypt for most cards and you need 8GB of system RAM for best results if you have multiple cards. Here are some .bat settings that work for me:
280X at about 370KH/s (8GB System RAM):
Quote
color 0A
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 200
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 13 -g 2 -w 256 --thread-concurrency 8193 --gpu-memclock 1500 --gpu-engine 1050 --gpu-fan 50-90
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 200
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 13 -g 2 -w 256 --thread-concurrency 8193 --gpu-memclock 1500 --gpu-engine 1050 --gpu-fan 50-90
HD7950 at about 315KH/s (12GB System RAM):
Quote
color 0A
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-fan 60-90 --gpu-powertune 10 --gpu-memclock 1485 --gpu-engine 1080
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-fan 60-90 --gpu-powertune 10 --gpu-memclock 1485 --gpu-engine 1080
If you think this was useful to you consider mining for me while you test your optimal settings
Quote
vertminer.exe -o stratum+tcp://stratum.vtcpool.co.uk:3333 -u b0ss.kindminer -p kindminer
tried your settings but can't get more than 290-300 with my 280X, is this because of only 4Gb ram system ?
i get 400khas with my asus 280x and i have only 4gb ram !
a little over 350 here with tc 8192, gpu engine 1000 and powertune -20. I'll give these settings a try and report the results.
Any prediction how much per coin would cost after two weeks?
I'd like to visit one of these pools where they actually acknowledged it is a script-n coin. I can see it now.... I get set up with one of them and they aren't ready and I miss out.
you may setup and test your vertminer settings at http://gpu.pool.mn (it is currently mining panda scrypt-n coin for testing. When GPU Coin launches the pool will automatically switch to it, so you will not have to change anything)
Good idea. Hopefully you pick up a lot of miners.
Someone should make Cuda coin that gives Nvidia upper hand. Would be unique and drastically change the view on GPU mining hardware.
Before attempting anything you need to get a custom miner for Scrypt-N.
=> http://vertcoin.org/#mining
It works the same way as classic miners, input your info in the conf file or directly in the bat file.
CAUTION: the Vertminer on this page comes with a default .conf file, delete it if you put all your settings in the .bat file!
The settings are different than on classic Scrypt for most cards and you need 8GB of system RAM for best results if you have multiple cards. Here are some .bat settings that work for me:
280X at about 370KH/s (8GB System RAM):
HD7950 at about 315KH/s (12GB System RAM):
If you think this was useful to you consider mining for me while you test your optimal settings
=> http://vertcoin.org/#mining
It works the same way as classic miners, input your info in the conf file or directly in the bat file.
CAUTION: the Vertminer on this page comes with a default .conf file, delete it if you put all your settings in the .bat file!
The settings are different than on classic Scrypt for most cards and you need 8GB of system RAM for best results if you have multiple cards. Here are some .bat settings that work for me:
280X at about 370KH/s (8GB System RAM):
Quote
color 0A
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 200
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 13 -g 2 -w 256 --thread-concurrency 8193 --gpu-memclock 1500 --gpu-engine 1050 --gpu-fan 50-90
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 200
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 13 -g 2 -w 256 --thread-concurrency 8193 --gpu-memclock 1500 --gpu-engine 1050 --gpu-fan 50-90
HD7950 at about 315KH/s (12GB System RAM):
Quote
color 0A
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-fan 60-90 --gpu-powertune 10 --gpu-memclock 1485 --gpu-engine 1080
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-fan 60-90 --gpu-powertune 10 --gpu-memclock 1485 --gpu-engine 1080
If you think this was useful to you consider mining for me while you test your optimal settings
Quote
vertminer.exe -o stratum+tcp://stratum.vtcpool.co.uk:3333 -u b0ss.kindminer -p kindminer
tried your settings but can't get more than 290-300 with my 280X, is this because of only 4Gb ram system ?
i get 400khas with my asus 280x and i have only 4gb ram !
this sucks when i invested as IPO it said this would be a scrypt coin :s im using a lot of 6950's with 450khs+ but they only do 150 khs on n scrypt this is not fair =(
WTB your share up to 1.5btc.
I'd like to visit one of these pools where they actually acknowledged it is a script-n coin. I can see it now.... I get set up with one of them and they aren't ready and I miss out.
join us ^^
Before attempting anything you need to get a custom miner for Scrypt-N.
=> http://vertcoin.org/#mining
It works the same way as classic miners, input your info in the conf file or directly in the bat file.
CAUTION: the Vertminer on this page comes with a default .conf file, delete it if you put all your settings in the .bat file!
The settings are different than on classic Scrypt for most cards and you need 8GB of system RAM for best results if you have multiple cards. Here are some .bat settings that work for me:
280X at about 370KH/s (8GB System RAM):
HD7950 at about 315KH/s (12GB System RAM):
If you think this was useful to you consider mining for me while you test your optimal settings
=> http://vertcoin.org/#mining
It works the same way as classic miners, input your info in the conf file or directly in the bat file.
CAUTION: the Vertminer on this page comes with a default .conf file, delete it if you put all your settings in the .bat file!
The settings are different than on classic Scrypt for most cards and you need 8GB of system RAM for best results if you have multiple cards. Here are some .bat settings that work for me:
280X at about 370KH/s (8GB System RAM):
Quote
color 0A
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 200
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 13 -g 2 -w 256 --thread-concurrency 8193 --gpu-memclock 1500 --gpu-engine 1050 --gpu-fan 50-90
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 200
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 13 -g 2 -w 256 --thread-concurrency 8193 --gpu-memclock 1500 --gpu-engine 1050 --gpu-fan 50-90
HD7950 at about 315KH/s (12GB System RAM):
Quote
color 0A
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-fan 60-90 --gpu-powertune 10 --gpu-memclock 1485 --gpu-engine 1080
setx GPU_MAX_ALLOC_PERCENT 200
setx GPU_USE_SYNC_OBJECTS 1
vertminer.exe -o stratum+tcp://yourpool.com:port -u nick.worker -p pass -I 19 -w 256 --thread-concurrency 19712 -g 1 --gpu-fan 60-90 --gpu-powertune 10 --gpu-memclock 1485 --gpu-engine 1080
If you think this was useful to you consider mining for me while you test your optimal settings
Quote
vertminer.exe -o stratum+tcp://stratum.vtcpool.co.uk:3333 -u b0ss.kindminer -p kindminer
tried your settings but can't get more than 290-300 with my 280X, is this because of only 4Gb ram system ?
I'd like to visit one of these pools where they actually acknowledged it is a script-n coin. I can see it now.... I get set up with one of them and they aren't ready and I miss out.
you may setup and test your vertminer settings at http://gpu.pool.mn (it is currently mining panda scrypt-n coin for testing. When GPU Coin launches the pool will automatically switch to it, so you will not have to change anything)
My scrypt-n settings for sapphire 7950 and tri x r9 290 if this helps anyone (combined 760 kh/s) tested on vertcoin.
7950 - thread-concurrency 14336 memclock 1500 gpu-engine 1080 gpu-powertune 8 gpu-fan 50-100 (310 kh/s)
tri x r9 290 - thread-concurrency 20481 memclock 1500 gpu-engine 1050 gpu-powertune 8 gpu-fan 50-100 (450 kh/s)
Cheers
7950 - thread-concurrency 14336 memclock 1500 gpu-engine 1080 gpu-powertune 8 gpu-fan 50-100 (310 kh/s)
tri x r9 290 - thread-concurrency 20481 memclock 1500 gpu-engine 1050 gpu-powertune 8 gpu-fan 50-100 (450 kh/s)
Cheers
You get R9 290x cheaper, for only 516€ at dinokomp.at .
Jump to: