GPUMAX | The Bitcoin Mining Marketplace - page 45.

Shadow383

sr. member

Activity: 336

Merit: 250

Quote from: Tittiez on May 02, 2012, 02:37:26 PM

Quote from: ElectricBrain on May 02, 2012, 08:04:10 AM

Is this for established miners? or can someone who's only putting out 300Mh/s join up?

I'm here to learn and will be ever expanding.

Well I only have about 250MH/s and my invite was accepted after about a month.

Oh well, I have a few gigahash available, applied months ago and never heard anything back, not sure on the logic Wink

drakahn

hero member

Activity: 504

Merit: 500

Quote from: miscreanity on May 03, 2012, 09:53:44 PM

Quote from: Tittiez on May 03, 2012, 09:50:40 PM

Quote from: rjk on May 02, 2012, 01:50:00 PM

Purchasing is still disabled for me. This may change in the future.

Purchasing seems enabled now!

Yep, even had some queued work finally go through. Mighty fine.

This

miscreanity

legendary

Activity: 1316

Merit: 1005

Quote from: Tittiez on May 03, 2012, 09:50:40 PM

Quote from: rjk on May 02, 2012, 01:50:00 PM

Purchasing is still disabled for me. This may change in the future.

Purchasing seems enabled now!

Yep, even had some queued work finally go through. Mighty fine.

Tittiez

hero member

Activity: 686

Merit: 500

Quote from: rjk on May 02, 2012, 01:50:00 PM

Purchasing is still disabled for me. This may change in the future.

Purchasing seems enabled now!

pirateat40

sr. member

Activity: 378

Merit: 250

"Yes I am a pirate, 200 years too late."

Quote from: -ck on May 03, 2012, 02:51:20 AM

I've spent a busload of time making cgminer be nice to pools and, more so, services like gpumax, so hopefully cgminer users and gpumax alike will find a much better experience upgrading to 2.4.0:

https://bitcointalksearch.org/topic/m.880112

Thanks for all your hard work. Grin

imsaguy

vip

Activity: 574

Merit: 500

Don't send me a pm unless you gpg encrypt it.

Quote from: -ck on May 03, 2012, 02:51:20 AM

Tip me before I cap yo ass!

148KkS2vgVi4VzUi4JcKzM2PMaMVPi3nnq

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

I've spent a busload of time making cgminer be nice to pools and, more so, services like gpumax, so hopefully cgminer users and gpumax alike will find a much better experience upgrading to 2.4.0:

https://bitcointalksearch.org/topic/m.880112

Fred26

newbie

Activity: 43

Merit: 0

Quote from: pirateat40 on May 02, 2012, 08:03:05 PM

Quote from: drakahn on May 02, 2012, 08:01:00 PM

Quote from: pirateat40 on May 02, 2012, 07:45:24 PM

Quote from: Tittiez on May 02, 2012, 07:41:46 PM

Quote from: drakahn on May 02, 2012, 07:30:57 PM

I get the same thing 4.6GH/s when going straight to mmpool, 4-4.1GH/s through gpumax

Its fine when purchases are running

With my single 6850 I get 250MH/s going straight to mmpool and 225MH/s going through gpumax.

You guys are seeing the MH changes in your miner or just on the pool?

Just on the pool, my miners report the same speeds to both mmpool and gpumax, but mmpool reports different

mmpool's stats don't update the fastest though, so it is hard to tell where the problem is

Yea, then its not that big of a deal. We'll work on getting it perfect down the road.

For what it's worth, those stats sound about right to me, (i.e. about 10% drop when using gpumax with no public work)
I have noticed that my gpu usage drops every now and again, and it seems to correlate to new blocks, but not always.
It does this on all 3 of my mining pc's. Dunno what it means, but it might help =D

pirateat40

sr. member

Activity: 378

Merit: 250

"Yes I am a pirate, 200 years too late."

Quote from: drakahn on May 02, 2012, 08:01:00 PM

Quote from: pirateat40 on May 02, 2012, 07:45:24 PM

Quote from: Tittiez on May 02, 2012, 07:41:46 PM

Quote from: drakahn on May 02, 2012, 07:30:57 PM

I get the same thing 4.6GH/s when going straight to mmpool, 4-4.1GH/s through gpumax

Its fine when purchases are running

With my single 6850 I get 250MH/s going straight to mmpool and 225MH/s going through gpumax.

You guys are seeing the MH changes in your miner or just on the pool?

Just on the pool, my miners report the same speeds to both mmpool and gpumax, but mmpool reports different

mmpool's stats don't update the fastest though, so it is hard to tell where the problem is

Yea, then its not that big of a deal. We'll work on getting it perfect down the road.

drakahn

hero member

Activity: 504

Merit: 500

Quote from: pirateat40 on May 02, 2012, 07:45:24 PM

Quote from: Tittiez on May 02, 2012, 07:41:46 PM

Quote from: drakahn on May 02, 2012, 07:30:57 PM

I get the same thing 4.6GH/s when going straight to mmpool, 4-4.1GH/s through gpumax

Its fine when purchases are running

With my single 6850 I get 250MH/s going straight to mmpool and 225MH/s going through gpumax.

You guys are seeing the MH changes in your miner or just on the pool?

Just on the pool, my miners report the same speeds to both mmpool and gpumax, but mmpool reports different

mmpool's stats don't update the fastest though, so it is hard to tell where the problem is

pirateat40

sr. member

Activity: 378

Merit: 250

"Yes I am a pirate, 200 years too late."

Quote from: Tittiez on May 02, 2012, 07:41:46 PM

Quote from: drakahn on May 02, 2012, 07:30:57 PM

I get the same thing 4.6GH/s when going straight to mmpool, 4-4.1GH/s through gpumax

Its fine when purchases are running

With my single 6850 I get 250MH/s going straight to mmpool and 225MH/s going through gpumax.

You guys are seeing the MH changes in your miner or just on the pool?

Tittiez

hero member

Activity: 686

Merit: 500

Quote from: drakahn on May 02, 2012, 07:30:57 PM

I get the same thing 4.6GH/s when going straight to mmpool, 4-4.1GH/s through gpumax

Its fine when purchases are running

With my single 6850 I get 250MH/s going straight to mmpool and 225MH/s going through gpumax.

drakahn

hero member

Activity: 504

Merit: 500

Quote from: bitlane on May 02, 2012, 03:39:38 PM

Just out of curiosity....

Why is it that when I use GPUMAX to connect to my main pool, as a proxy service, I am penalized by up to 10% of my total hashing power as reported by my pool ?
Yet, when I connect directly to that same pool and remove GPUMAX from the equation, all stats report as they should ?
I understand that I 'Never make less than mining on my own' (when public work is available to perhaps offset my hash rate loss).but what is happening to those additional hashes ?

This is based on a study of the 6 GH/s that I am currently pointing towards GPUMAX as well as BTCGuild.

BTCGuild--->via--->GPUMAX = 5500 MH/s average reported by BTCGuild.
BTCGuild------------>Direct = 6000 MH/s average reported by BTCGuild.

Is this simply a route problem between the services ? Is this 'overhead' ?

I get the same thing 4.6GH/s when going straight to mmpool, 4-4.1GH/s through gpumax

Its fine when purchases are running

pirateat40

sr. member

Activity: 378

Merit: 250

"Yes I am a pirate, 200 years too late."

Quote from: phorensic on May 02, 2012, 05:13:51 PM

Woohoo! I'm finally connecting to GPUMAX with cgminer! However, the website stopped working right now, lol. Just in case you weren't aware I am getting:

Quote

504 Gateway Time-out

The server didn't respond in time.

Yea we did a quick port change that took the system down for a sec. We should be good to go now.

pirateat40

sr. member

Activity: 378

Merit: 250

"Yes I am a pirate, 200 years too late."

Quote from: bitlane on May 02, 2012, 03:39:38 PM

Just out of curiosity....

Why is it that when I use GPUMAX to connect to my main pool, as a proxy service, I am penalized by up to 10% of my total hashing power as reported by my pool ?
Yet, when I connect directly to that same pool and remove GPUMAX from the equation, all stats report as they should ?
I understand that I 'Never make less than mining on my own' (when public work is available to perhaps offset my hash rate loss).but what is happening to those additional hashes ?

This is based on a study of the 6 GH/s that I am currently pointing towards GPUMAX as well as BTCGuild.

BTCGuild--->via--->GPUMAX = 5500 MH/s average reported by BTCGuild.
BTCGuild------------>Direct = 6000 MH/s average reported by BTCGuild.

Is this simply a route problem between the services ? Is this 'overhead' ?

Don't know, I do know that BTCGuild always shows a little higher speeds, have you checked it with your miner?

phorensic

hero member

Activity: 630

Merit: 500

Woohoo! I'm finally connecting to GPUMAX with cgminer! However, the website stopped working right now, lol. Just in case you weren't aware I am getting:

Quote

504 Gateway Time-out

The server didn't respond in time.

bitlane

sr. member

Activity: 462

Merit: 250

I heart thebaron

Just out of curiosity....

Why is it that when I use GPUMAX to connect to my main pool, as a proxy service, I am penalized by up to 10% of my total hashing power as reported by my pool ?
Yet, when I connect directly to that same pool and remove GPUMAX from the equation, all stats report as they should ?
I understand that I 'Never make less than mining on my own' (when public work is available to perhaps offset my hash rate loss).but what is happening to those additional hashes ?

This is based on a study of the 6 GH/s that I am currently pointing towards GPUMAX as well as BTCGuild.

BTCGuild--->via--->GPUMAX = 5500 MH/s average reported by BTCGuild.
BTCGuild------------>Direct = 6000 MH/s average reported by BTCGuild.

Is this simply a route problem between the services ? Is this 'overhead' ?

Tittiez

hero member

Activity: 686

Merit: 500

Quote from: ElectricBrain on May 02, 2012, 08:04:10 AM

Is this for established miners? or can someone who's only putting out 300Mh/s join up?

I'm here to learn and will be ever expanding.

Well I only have about 250MH/s and my invite was accepted after about a month.

rjk

sr. member

Activity: 448

Merit: 250

1ngldh

Quote from: amazingrando on May 02, 2012, 01:48:37 PM

Not sure why people have so much difficulty with setting the price. It's very simple

1) Go to purchase shares and you will see the purchase price

2) Subtract 10% (or multiply by .9) and you get the PPS price

3) Set your price at or below the price you calculated (setting lower will give you more headroom if purchase price fluctuate downward)

4) Profit!

Purchasing is still disabled for me. This may change in the future.

amazingrando

hero member

Activity: 546

Merit: 500

Not sure why people have so much difficulty with setting the price. It's very simple

1) Go to purchase shares and you will see the purchase price

2) Subtract 10% (or multiply by .9) and you get the PPS price

3) Set your price at or below the price you calculated (setting lower will give you more headroom if purchase price fluctuate downward)

4) Profit!

Topic: GPUMAX | The Bitcoin Mining Marketplace - page 45. (Read 215578 times)