GTX 1060 discussion thread - page 11.

shater

newbie

Activity: 87

Merit: 0

Quote from: ltcsprite on February 28, 2018, 02:19:29 AM

Quote from: timikulit on February 28, 2018, 01:47:09 AM

Quote from: lotfiuser on February 28, 2018, 01:28:48 AM

ithink right now is useless and not good anymore for mining (as i think ) im just waiting for ethreum to go pos then i will enter mining or stay away from it

If ETH is already POS. What coin are you going to mine? is the profit somehow similar when mining ETH?

I can sense that Its too late to enter mining altcoin specially when ETH goes POS. Theres nothing more profitable rather than ETH

And the majority of the miners are on ETH. hmmm

Uhhhhhhhhhhhhhhhh.

All kinda stupid here.

Do you fuckers even read? Huh

Nope, fuckers don't read.

ltcsprite

full member

Activity: 269

Merit: 101

Quote from: timikulit on February 28, 2018, 01:47:09 AM

Quote from: lotfiuser on February 28, 2018, 01:28:48 AM

ithink right now is useless and not good anymore for mining (as i think ) im just waiting for ethreum to go pos then i will enter mining or stay away from it

If ETH is already POS. What coin are you going to mine? is the profit somehow similar when mining ETH?

I can sense that Its too late to enter mining altcoin specially when ETH goes POS. Theres nothing more profitable rather than ETH

And the majority of the miners are on ETH. hmmm

Uhhhhhhhhhhhhhhhh.

All kinda stupid here.

Do you fuckers even read? Huh

timikulit

full member

Activity: 196

Merit: 103

Quote from: lotfiuser on February 28, 2018, 01:28:48 AM

ithink right now is useless and not good anymore for mining (as i think ) im just waiting for ethreum to go pos then i will enter mining or stay away from it

If ETH is already POS. What coin are you going to mine? is the profit somehow similar when mining ETH?

I can sense that Its too late to enter mining altcoin specially when ETH goes POS. Theres nothing more profitable rather than ETH

And the majority of the miners are on ETH. hmmm

Quake4

member

Activity: 825

Merit: 18

MindMiner developer

Quote from: osem on February 23, 2018, 12:14:21 AM

what is differences between them, how can i fix it?

4 card have samsung memory with small latency and 2 new have hynix memory with large latency.
Only change cards.

lotfiuser

sr. member

Activity: 1249

Merit: 295

Palestine

ithink right now is useless and not good anymore for mining (as i think ) im just waiting for ethreum to go pos then i will enter mining or stay away from it

Quake4

member

Activity: 825

Merit: 18

MindMiner developer

Quote from: vladutz1186 on February 21, 2018, 04:17:25 PM

When one or more cards hit 53-54 degrees, system is instable and I get "gpu clock are too low"
Memory Clock : +775 (Micron memory)

IMHO, memory clock for micron very high. Try range 500 - 700. If its stable adjust core clock by +50 up to 250.

Quake4

member

Activity: 825

Merit: 18

MindMiner developer

Quote from: gsanjin on February 26, 2018, 11:48:47 AM

Quote from: KDM724 on February 26, 2018, 05:09:08 AM

Quote from: ivakar on February 20, 2018, 11:16:51 AM

Quote from: KDM724 on February 20, 2018, 09:23:06 AM

thinking to get one more card so any suggestions ? PNY 1060 6GB OC GAMING Edition or Gigabyte Windforce OC or MSI GTX 1060 6GB OC V2 ?

in order to get more sols you should oveclock your memory as well, not only core, good and pro[erlu overclocked gtx1060 can pus around 330-340 sol/s, which is about 10% more then you have

As you commented, I changed and tried in different ways & I got 325sol/s with Hynix memory Tongue

core +180, mem: -150, power: 90%, on windows 7 with EWBF, but it crashes after 10-20mins (only programme is crashing not GPU). Huh

Core +140 Mem +540 PL 90%, Hynix 3GB, using DSTM 0.58 and getting rock solid average 314 sol/s

Core +99 Mem -113 PL 91% 3Gb, Bminer 5.3.0 309 sol/s and no craches, but GPU 70 degrees fan 70% ~2700rpm

greyday

member

Activity: 434

Merit: 52

Quote from: cryptodunno on February 27, 2018, 01:09:31 AM

guys, need some advice..
recently i switched few of my 1060s with Samsung memory to ETH+keccak and doing abt 170mh/s per claymore, but actual hashrate on ethermine is only around 140 mh/s.
actual daily income around the same as WTM shows.

Should I worry abt it and try another pool?

Go by income, not site hashrate.

cryptodunno

member

Activity: 308

Merit: 10

guys, need some advice..
recently i switched few of my 1060s with Samsung memory to ETH+keccak and doing abt 170mh/s per claymore, but actual hashrate on ethermine is only around 140 mh/s.
actual daily income around the same as WTM shows.

Should I worry abt it and try another pool?

greyday

member

Activity: 434

Merit: 52

Quote from: Patuba on February 26, 2018, 02:25:05 PM

Just curious, when you guys get your average SOLs, do you get it from your mining software or the mining pool site?

Both. I use the software to tweak until I'm happy then compare to the pool stats 1-2 days later.

PowerRangerX

newbie

Activity: 30

Merit: 0

Quote from: crairezx20 on February 26, 2018, 12:32:12 PM

Guys are you experience to hit 74c temperature with 30c room temperature with stock settings and 100% fan?
My card is MSI 1060 6gb armor OC edition but the temp is too high compare to my other cards like 1080ti super jetstream and 1070 dual oc..
I hope someone could give me a tip for OC settings with good hashrate for zcash or ethereum dual mining..

....

Yes I have same experience too
My card Zotac 1060 3Gb temp hit 71C with stock setting, and compare to my EVGA 1070 SC juts hit 60C.
I dont know whats wrong with 1060 why generate so much heat.

Now after OC a little bit and set fan to 80% power limit 70% temp hit 62C

Patuba

newbie

Activity: 63

Merit: 0

Just curious, when you guys get your average SOLs, do you get it from your mining software or the mining pool site?

crairezx20

legendary

Activity: 1638

Merit: 1046

Guys are you experience to hit 74c temperature with 30c room temperature with stock settings and 100% fan?
My card is MSI 1060 6gb armor OC edition but the temp is too high compare to my other cards like 1080ti super jetstream and 1070 dual oc..
I hope someone could give me a tip for OC settings with good hashrate for zcash or ethereum dual mining..

Quote from: KDM724 on February 26, 2018, 05:09:08 AM

Quote from: ivakar on February 20, 2018, 11:16:51 AM

Quote from: KDM724 on February 20, 2018, 09:23:06 AM

thinking to get one more card so any suggestions ? PNY 1060 6GB OC GAMING Edition or Gigabyte Windforce OC or MSI GTX 1060 6GB OC V2 ?

in order to get more sols you should oveclock your memory as well, not only core, good and pro[erlu overclocked gtx1060 can pus around 330-340 sol/s, which is about 10% more then you have

As you commented, I changed and tried in different ways & I got 325sol/s with Hynix memory Tongue

core +180, mem: -150, power: 90%, on windows 7 with EWBF, but it crashes after 10-20mins (only programme is crashing not GPU). Huh

I think better to try change the negative to positive i always experience the msi oc software hang or crashes. try to use the + in memory clock instead..

gsanjin

member

Activity: 191

Merit: 12

Quote from: KDM724 on February 26, 2018, 05:09:08 AM

Quote from: ivakar on February 20, 2018, 11:16:51 AM

Quote from: KDM724 on February 20, 2018, 09:23:06 AM

thinking to get one more card so any suggestions ? PNY 1060 6GB OC GAMING Edition or Gigabyte Windforce OC or MSI GTX 1060 6GB OC V2 ?

in order to get more sols you should oveclock your memory as well, not only core, good and pro[erlu overclocked gtx1060 can pus around 330-340 sol/s, which is about 10% more then you have

As you commented, I changed and tried in different ways & I got 325sol/s with Hynix memory Tongue

core +180, mem: -150, power: 90%, on windows 7 with EWBF, but it crashes after 10-20mins (only programme is crashing not GPU). Huh

Core +140 Mem +540 PL 90%, Hynix 3GB, using DSTM 0.58 and getting rock solid average 314 sol/s

KDM724

newbie

Activity: 2

Merit: 0

Quote from: ivakar on February 20, 2018, 11:16:51 AM

Quote from: KDM724 on February 20, 2018, 09:23:06 AM

thinking to get one more card so any suggestions ? PNY 1060 6GB OC GAMING Edition or Gigabyte Windforce OC or MSI GTX 1060 6GB OC V2 ?

in order to get more sols you should oveclock your memory as well, not only core, good and pro[erlu overclocked gtx1060 can pus around 330-340 sol/s, which is about 10% more then you have

As you commented, I changed and tried in different ways & I got 325sol/s with Hynix memory Tongue

core +180, mem: -150, power: 90%, on windows 7 with EWBF, but it crashes after 10-20mins (only programme is crashing not GPU). Huh

gsanjin

member

Activity: 191

Merit: 12

Quote from: osem on February 23, 2018, 12:14:21 AM

Quote from: osem on February 19, 2018, 03:16:19 AM

hi,

i have 6x 1060 gtx 6gt rig on MSİ Z270A-PRO

i get 25 mhs from 4 cards, other 2 cards gives 20 mhs. clock settings are same. OS is win 10, i am using claymores miner. Any suggestions?

hello again, i checked cable connections, checked psu, all are correct. I changed os to ethos sat up again, hashrates are same. still 2 cards gives 20mhs, 4 cards gives 25 mhs.

I realized something, near 4 cards written name that GTX 1060 6GT,

other 2 cards written name GTX 1060 6GT Rev. 2.

what is differences between them, how can i fix it?

Try to read this thread, this is well explained

It is 99,99% because memory chips on card. Best hashrate gives samsung memory (up to 25MH/S), then micron (up to 23MH/S) and the worst is hynix (up to 19-20 MH/S). You can check memory brand using GPU-Z.

samy_sa

full member

Activity: 211

Merit: 100

Quote from: hatshepsut93 on August 04, 2016, 02:41:01 PM

Tried to search on different topics and blogs and couldn't find the exact results.

So, what is the hashrate of GTX 1060 on different algos? Especially on Ether.

it is depend on some parameters, I use windos 10 and my hash rate is around 18-27.5 MH/s. what is your hashrate? more than this or your hashrate low than this?

osem

newbie

Activity: 2

Merit: 0

Quote from: osem on February 19, 2018, 03:16:19 AM

hi,

i have 6x 1060 gtx 6gt rig on MSİ Z270A-PRO

i get 25 mhs from 4 cards, other 2 cards gives 20 mhs. clock settings are same. OS is win 10, i am using claymores miner. Any suggestions?

hello again, i checked cable connections, checked psu, all are correct. I changed os to ethos sat up again, hashrates are same. still 2 cards gives 20mhs, 4 cards gives 25 mhs.

I realized something, near 4 cards written name that GTX 1060 6GT,

other 2 cards written name GTX 1060 6GT Rev. 2.

what is differences between them, how can i fix it?

vladutz1186

jr. member

Activity: 39

Merit: 2

Quote from: tadeus1 on February 21, 2018, 08:30:34 PM

vladutz1186, yes you can lower power limit.

Thanks, I`ll try that !

MelTronic

newbie

Activity: 1

Merit: 0

I have Asus GTX 1060 0C 6G (dual fan) and mining on Nicehash with settings 90% power, +145core, +500memory, T=~45°C. Most profitable algo is Equihash with ~330-340 Sols/s.

Can I get more profit from mining something else then Nicehash? Whitetomine.com shows most profitable "Ethash" but in software itself is vice-versa.

Topic: GTX 1060 discussion thread - page 11. (Read 289435 times)