GTX 1060 discussion thread - page 17.

giveen1

newbie

Activity: 70

Merit: 0

Quote from: zern on January 30, 2018, 06:52:37 AM

Gigabyte Windforce OC 3Gb

Ethash
Power limit: 80
Core: 1300 (-400)
Memory: 4800 (+1000, Samsung)
Fan: 60% (62C, open case)
Speed: 25.5 Mh/s (ethminer), Claymore Dual miner with current clocks make every share faulty.

Neoscrypt
Power limit: 100
Core: 1900 (+150)
Memory: 4600 (+850, Samsung)
Fan: 65% (69C, open case)
Speed: 820 kh/s (hsrminer), 750 kh/s (ccminer KlausT) - don't know if hsrminer showing real numbers, some ppl says they are not real.

Try reducing to 90 power limit and drop your memory to nothing. Memory clock has no impact on neoscrypt.

JohnDoe3490

full member

Activity: 378

Merit: 102

Quote from: Rasanders22 on January 30, 2018, 09:51:57 PM

Quote from: JohnDoe3490 on January 29, 2018, 07:46:45 PM

My new sets of 1060s came in

. The ssc is mining 5 mh more over my other 1060s. Wow the difference is amazing even though it is a Hynix memory.

My SSC is 24MHs, my FTWs do 20MHs. All 3 are Samsun memory.

Were they new? All of mine were Hynix from the new batches.

Rasanders22

jr. member

Activity: 67

Merit: 3

Quote from: JohnDoe3490 on January 29, 2018, 07:46:45 PM

My new sets of 1060s came in

. The ssc is mining 5 mh more over my other 1060s. Wow the difference is amazing even though it is a Hynix memory.

My SSC is 24MHs, my FTWs do 20MHs. All 3 are Samsun memory.

mattyforcrypto

jr. member

Activity: 163

Merit: 2

Quote from: motoprose on January 30, 2018, 07:59:34 PM

Have seen the Asus P106-100 cards and they are basically these cards with 6gb on the pcb but made for mining only as they don't have any dvi or vga output in the back of the card.
I know that msi makes their own variation of this card as well.
They have been sold out for months now as with any of these cards now.

Unless they come at a big discount they won't really be worth it, the resale value of them is practically 0 since they are useless for anything else.

I have been getting my Zotac AMP! 1060 with Micron to 23.6 on Ethash with +700 on mem, -20 on core and the fan running at 50% fan (65-68°) at 80% power limit, seemed to be the lowest power drain (between 66 and 75 according to GPUZ, no idea why it fluctuates so much)

motoprose

member

Activity: 195

Merit: 41

Have seen the Asus P106-100 cards and they are basically these cards with 6gb on the pcb but made for mining only as they don't have any dvi or vga output in the back of the card.
I know that msi makes their own variation of this card as well.
They have been sold out for months now as with any of these cards now.

milicic

full member

Activity: 180

Merit: 100

I have GTX 1060 MSI gaming x plus 6gb (samsung), mining zcash 345sols per card with dstminer power limit 70%, core clock +100, memory clock +500. Running smoothly...

JohnDoe3490

full member

Activity: 378

Merit: 102

Quote from: zern on January 30, 2018, 06:52:37 AM

Gigabyte Windforce OC 3Gb

Ethash
Power limit: 80
Core: 1300 (-400)
Memory: 4800 (+1000)
Fan: 60% (62C, open case)
Speed: 25.5 Mh/s (ethminer), Claymore Dual miner with current clocks make every share faulty.

Neoscrypt
Power limit: 100
Core: 1900 (+150)
Memory: 4600 (+850)
Fan: 65% (69C, open case)
Speed: 820 kh/s (hsrminer), 750 kh/s (ccminer KlausT) - don't know if hsrminer showing real numbers, some ppl says they are not real.

I will try this later. Thanks! I didn't realize that I should lower my core that much.

zern

newbie

Activity: 2

Merit: 0

Gigabyte Windforce OC 3Gb

Ethash
Power limit: 80
Core: 1300 (-400)
Memory: 4800 (+1000, Samsung)
Fan: 60% (62C, open case)
Speed: 25.5 Mh/s (ethminer), Claymore Dual miner with current clocks make every share faulty.

Neoscrypt
Power limit: 100
Core: 1900 (+150)
Memory: 4600 (+850, Samsung)
Fan: 65% (69C, open case)
Speed: 820 kh/s (hsrminer), 750 kh/s (ccminer KlausT) - don't know if hsrminer showing real numbers, some ppl says they are not real.

JohnDoe3490

full member

Activity: 378

Merit: 102

My new sets of 1060s came in

. The ssc is mining 5 mh more over my other 1060s. Wow the difference is amazing even though it is a Hynix memory.

giveen1

newbie

Activity: 70

Merit: 0

Quote from: preda on January 29, 2018, 05:45:59 PM

Quote from: giveen1 on January 27, 2018, 02:24:05 PM

Quote from: wolf_miner on January 27, 2018, 01:45:24 PM

Hi, sorry to disturb, what are the best settings for GTX 1060 3G to mine neoscrypt using ccminer (clausT)? I have set PL 70%, clk +150, mem -502.

Cheers W_M

Power 90
Core 250
Memory -anything, has no real impact

core 250?

? its really too much!!!!

i agree, I experimented today and went down to Core 210 with barely a hashrate drop.

preda

sr. member

Activity: 756

Merit: 250

Quote from: giveen1 on January 27, 2018, 02:24:05 PM

Quote from: wolf_miner on January 27, 2018, 01:45:24 PM

Hi, sorry to disturb, what are the best settings for GTX 1060 3G to mine neoscrypt using ccminer (clausT)? I have set PL 70%, clk +150, mem -502.

Cheers W_M

Power 90
Core 250
Memory -anything, has no real impact

core 250?

? its really too much!!!!

giveen1

newbie

Activity: 70

Merit: 0

Quote from: wolf_miner on January 27, 2018, 01:45:24 PM

Hi, sorry to disturb, what are the best settings for GTX 1060 3G to mine neoscrypt using ccminer (clausT)? I have set PL 70%, clk +150, mem -502.

Cheers W_M

Power 90
Core 250
Memory -anything, has no real impact

wolf_miner

legendary

Activity: 1018

Merit: 1001

Hi, sorry to disturb, what are the best settings for GTX 1060 3G to mine neoscrypt using ccminer (clausT)? I have set PL 70%, clk +150, mem -502.

Cheers W_M

emarian88

newbie

Activity: 19

Merit: 0

Quote from: MagicSmoker on January 26, 2018, 04:02:05 PM

Quote from: ?? on ??

got ETH mining working

got tuned to 23-24 mining ETH, bounces in between with ethminer.

Any 1060 models have issues with certain fan speed %? Like running my EVGA 1060 SC on 60% fan speed daily OK? Im sure people run them higher just curious if any models have like a limit, or start clicking, or known to fail etc etc. if anyone has experience with such instances.

Then whats a solid temp to maintain these cards at 55? 60? 65?

Ideally keep temp below 70C and fan at 80% or less, but if you have to live with violating one of these then definitely go with running the fan harder, not letting the temp climb higher.

I have a 6x gtx 1060 3gb... and the temperature doesnt grow more than 55*celsius.... the place Where i keep them is very cold ...almost 15 *celsius and is a big room(OPEN space). Dont have problem with them

I_See_Stars

newbie

Activity: 47

Merit: 0

Quote from: tadeus1 on January 26, 2018, 05:04:58 PM

If by Elpida mean Micron for the Nvidias, then it is in the middle of Hynix and Samsung. OK I guess. and its better than Hynix.

Tbh, I didn't know that elpida only in AMD cards. I thought it's exist but extremely rare in nvidia.

gsanjin

member

Activity: 191

Merit: 12

Quote from: Daneastden on January 26, 2018, 10:44:56 PM

how accurate is gputemp's temperature reading? ive been using it for a couple days now and both gpus are about 55 degrees celcius every time i check. i live in quite a hot country (most days are over 30 degrees) so was worried about them overheating but from what ive been reading, others usually have their gpus running at around 70 degrees.

is msiburner a better alternative to manage temp and adjust gpu settings?

since this is my first rig i dont want to push the gpus to their limit so im tempted to leave them running as is (im currently mining a ITNS (cryptonoight), averaging around 900h/s over 24 hours)

I use Afterburner with custom fan curve, targeting between 65-70 degrees (windforce oc 3GB). But you can always take off gpu fans and using zip-ties put your own silent 120mm or 80mm fans powered by 12v, 7v or 5v from molex connector (as I do on some old 280x's).

tadeus1

member

Activity: 140

Merit: 11

Crypto night algorithm is light on temperature and power. So no big worries there. 55c is good.
If you switch to other algo like eth or other you may see increase in temp and watts.
Up to 65C I would say you are ok. Of course the lower the better

Daneastden

newbie

Activity: 3

Merit: 0

how accurate is gputemp's temperature reading? ive been using it for a couple days now and both gpus are about 55 degrees celcius every time i check. i live in quite a hot country (most days are over 30 degrees) so was worried about them overheating but from what ive been reading, others usually have their gpus running at around 70 degrees.

is msiburner a better alternative to manage temp and adjust gpu settings?

since this is my first rig i dont want to push the gpus to their limit so im tempted to leave them running as is (im currently mining a ITNS (cryptonoight), averaging around 900h/s over 24 hours)

tadeus1

member

Activity: 140

Merit: 11

If by Elpida mean Micron for the Nvidias, then it is in the middle of Hynix and Samsung. OK I guess. and its better than Hynix.

I_See_Stars

newbie

Activity: 47

Merit: 0

Samsung mem 1060's on ETH runs with 22-24 mh/s. hynix maximum is 20.
On equihash about 300, no matter what memory provider (ewbf).
Never had experience with elpida memory btw. Is it as bad as hynix on ETH mining?

Topic: GTX 1060 discussion thread - page 17. (Read 289435 times)