ZEC(Equihash): 318-340 Sol/s
ETH(Dagger): 21.5-24 MH/s
Gigabyte GTX1060 Xtreme Gaming 6G.
+360 mem
+110 core
Powerlimit?ETH(Dagger): 21.5-24 MH/s
Gigabyte GTX1060 Xtreme Gaming 6G.
+360 mem
+110 core
More info pls...
Program used? Overclock? Tdp?
Topic: GTX 1060 discussion thread - page 57. (Read 289415 times)
More info pls...
Program used? Overclock? Tdp?
ZEC(Equihash): 318-340 Sol/s
ETH(Dagger): 21.5-24 MH/s
Gigabyte GTX1060 Xtreme Gaming 6G.
+360 mem
+110 core
Powerlimit? ETH(Dagger): 21.5-24 MH/s
Gigabyte GTX1060 Xtreme Gaming 6G.
+360 mem
+110 core
Get a new batch auf Zotac 1060 6GB Cards.
GPU-Z shows me the Cards has Micron RAM i think what a bull shit but wonders still happens the cards runs better then my Samsung based Cards
GPU-Z shows me the Cards has Micron RAM i think what a bull shit but wonders still happens the cards runs better then my Samsung based Cards
What are you mining nebell...
I'm mining at around 125 watts / card ( really high, how you guys can mine at 80-85 watts ? ) , power consumption of 82%, core memory + 50. Using CCminer 2.0, windows 10.
There is your answer in bold.
My 5 cards draw 350W from the wall, which comes down to about 70W, minus the CPU and other parts of the computer, so the real wall power draw is less than 70W per card.
I run +600 memory and 55% power consumption. Downclock your GPU as much as possible.
But I have quit mining Ethereum. It's good however for people with high power cost (me, I just don't care, I mine coins which are cheap now and have potential to go x10 in the future, giving me x10 proft).
Thanks
I've been reading a lot of pages here... Thinking about switching to eth mining and buy digibytes afterwhile instead of mining digibyte directly.
I'm mining at around 125 watts / card ( really high, how you guys can mine at 80-85 watts ? ) , power consumption of 82%, core memory + 50. Using CCminer 2.0, windows 10.
I have as well some effective hashrate problems, see ;
https://bitcointalksearch.org/topic/m.20730275
Tomorrow i'll mine Eth and compare my stats to yours to see how its going.
If anyone got a solution for me in the meantime, I would really, really appreciate it.
Pics : CCMiner :
Pool hashrate :
I'm mining at around 125 watts / card ( really high, how you guys can mine at 80-85 watts ? ) , power consumption of 82%, core memory + 50. Using CCminer 2.0, windows 10.
I have as well some effective hashrate problems, see ;
https://bitcointalksearch.org/topic/m.20730275
Tomorrow i'll mine Eth and compare my stats to yours to see how its going.
If anyone got a solution for me in the meantime, I would really, really appreciate it.
Pics : CCMiner :
Pool hashrate :
I add one 1060 for the first time today to my rigs. I'm getting 21MH/s ETH, 90W on the wall dual mining DCR. Lowered the power to 80% and increased memory 500MHz.
Hello guys, in one shop near me have ASUS DUAL GTX 1060 6GB GDDR5 192 BIT, DVI-I, HDMI, DP , is this wroth to buy ? I am mining eth and exp , dagger, can anyone tell me the hashrate / W?
I'm mining at around 125 watts / card ( really high, how you guys can mine at 80-85 watts ? ) , power consumption of 82%, core memory + 50. Using CCminer 2.0, windows 10.
There is your answer in bold.
My 5 cards draw 350W from the wall, which comes down to about 70W, minus the CPU and other parts of the computer, so the real wall power draw is less than 70W per card.
I run +600 memory and 55% power consumption. Downclock your GPU as much as possible.
But I have quit mining Ethereum. It's good however for people with high power cost (me, I just don't care, I mine coins which are cheap now and have potential to go x10 in the future, giving me x10 proft).
Fellas one detail yet to be mentioned is that 1060 3GB have 9 computation units, while the 6GB have 10 computation units. The 3GB model is running at 20mhs after mem oc and 6GB at 25mhs.
1 more computation unit and 5mhs difference? 1070s have 15 computation units and crunches at 32-33mhs, still wondering why the hashdrop on 1060 3GB.
The 3GB model i am using is Gigabyte dual windforce and the 6GB is Asus dual oc, however the case with other 3GB could be different as there are reports of 24mhs on some 3GB cards.
1 more computation unit and 5mhs difference? 1070s have 15 computation units and crunches at 32-33mhs, still wondering why the hashdrop on 1060 3GB.
The 3GB model i am using is Gigabyte dual windforce and the 6GB is Asus dual oc, however the case with other 3GB could be different as there are reports of 24mhs on some 3GB cards.
With the current price, the 1060 is the most interesting one. I don't see any better alternative so far as AMD cards are nowhere to be found at a reasonable price.
Hi all,
Well I've placed my OC script here:
https://pastebin.com/kjJh1BC6
Uses nvidia inspector with the settings I use 650W at the wall with >140MHs and >1445MHs SIA dual mining. The performance of claymore v9.8 is significantly better than v9.7 dual mining. The RX480 I have (asus strix rx480) is beaten by the msi gaming X cards, but other rx480 cards maybe better. Just comparing what I use.
Have fun tuning!
Well I've placed my OC script here:
https://pastebin.com/kjJh1BC6
Uses nvidia inspector with the settings I use 650W at the wall with >140MHs and >1445MHs SIA dual mining. The performance of claymore v9.8 is significantly better than v9.7 dual mining. The RX480 I have (asus strix rx480) is beaten by the msi gaming X cards, but other rx480 cards maybe better. Just comparing what I use.
Have fun tuning!
I've been reading a lot of pages here... Thinking about switching to eth mining and buy digibytes afterwhile instead of mining digibyte directly.
I'm mining at around 125 watts / card ( really high, how you guys can mine at 80-85 watts ? ) , power consumption of 82%, core memory + 50. Using CCminer 2.0, windows 10.
I have as well some effective hashrate problems, see ;
https://bitcointalksearch.org/topic/m.20730275
Tomorrow i'll mine Eth and compare my stats to yours to see how its going.
If anyone got a solution for me in the meantime, I would really, really appreciate it.
Pics : CCMiner :
Pool hashrate :
I'm mining at around 125 watts / card ( really high, how you guys can mine at 80-85 watts ? ) , power consumption of 82%, core memory + 50. Using CCminer 2.0, windows 10.
I have as well some effective hashrate problems, see ;
https://bitcointalksearch.org/topic/m.20730275
Tomorrow i'll mine Eth and compare my stats to yours to see how its going.
If anyone got a solution for me in the meantime, I would really, really appreciate it.
Pics : CCMiner :
Pool hashrate :
Hi all,
Thought I'd share my thoughts on this thread, I've got a mixed 6 x GTX1060 rig dual mining (3 x MSI gaming x), (3 x EVGA 1060), combined ETH 143HMs, and SIA 1445MHs, dual mining with claymore v9.8. I've found that the dual mining performance of the MSI gaming x cards is amazing, comparable to the RX480 when mining for SIA. I have an RX480 card with modded bios and the SIA hashrate is about the same as the gaming X cards, the GTX1060 is actually slightly faster truth be told on SIA. These are OC'd I use the nvidia inspector tool with an OC batch script on the command line. If anyone needs any help with this on their 1060's drop me a line.
https://pasteboard.co/GEJS7TC.png
Thought I'd share my thoughts on this thread, I've got a mixed 6 x GTX1060 rig dual mining (3 x MSI gaming x), (3 x EVGA 1060), combined ETH 143HMs, and SIA 1445MHs, dual mining with claymore v9.8. I've found that the dual mining performance of the MSI gaming x cards is amazing, comparable to the RX480 when mining for SIA. I have an RX480 card with modded bios and the SIA hashrate is about the same as the gaming X cards, the GTX1060 is actually slightly faster truth be told on SIA. These are OC'd I use the nvidia inspector tool with an OC batch script on the command line. If anyone needs any help with this on their 1060's drop me a line.
https://pasteboard.co/GEJS7TC.png
Sure! Would love your help to get those settings. I'm running 8 x 1060's pulling 21.0 mh/s for eth on a dual mine with decred. Power is 80%. Memory could go a bit higher but not much.
KAF2 6GB OC
Core: 2025Mhz
Mem: 4498Mhz
Skunkhash: 19,25Mh/s
[2017-08-09 01:50:07] skunk block 30086, diff 32185.773
[2017-08-09 01:50:26] [S/A/T]: 0/3953/3958, diff: 0.658, 19.26MH/s yes!
[2017-08-09 01:50:28] [S/A/T]: 0/3954/3959, diff: 1.052, 19.26MH/s yes!
[2017-08-09 01:50:36] [S/A/T]: 0/3955/3960, diff: 0.103, 19.26MH/s yes!
[2017-08-09 01:50:37] [S/A/T]: 0/3956/3961, diff: 0.302, 19.26MH/s yes!
[2017-08-09 01:51:08] [S/A/T]: 0/3957/3962, diff: 0.117, 19.26MH/s yes!
[2017-08-09 01:51:14] [S/A/T]: 0/3958/3963, diff: 0.060, 19.25MH/s yes!
[2017-08-09 01:51:43] [S/A/T]: 0/3959/3964, diff: 0.055, 19.25MH/s yes!
[2017-08-09 01:51:56] [S/A/T]: 0/3960/3965, diff: 0.073, 19.25MH/s yes!
[2017-08-09 01:52:10] GPU#0:GeForce GTX 1060 6GB, 19.25MH/s
Intensity 24 palginmod ccminer
Core: 2025Mhz
Mem: 4498Mhz
Skunkhash: 19,25Mh/s
[2017-08-09 01:50:07] skunk block 30086, diff 32185.773
[2017-08-09 01:50:26] [S/A/T]: 0/3953/3958, diff: 0.658, 19.26MH/s yes!
[2017-08-09 01:50:28] [S/A/T]: 0/3954/3959, diff: 1.052, 19.26MH/s yes!
[2017-08-09 01:50:36] [S/A/T]: 0/3955/3960, diff: 0.103, 19.26MH/s yes!
[2017-08-09 01:50:37] [S/A/T]: 0/3956/3961, diff: 0.302, 19.26MH/s yes!
[2017-08-09 01:51:08] [S/A/T]: 0/3957/3962, diff: 0.117, 19.26MH/s yes!
[2017-08-09 01:51:14] [S/A/T]: 0/3958/3963, diff: 0.060, 19.25MH/s yes!
[2017-08-09 01:51:43] [S/A/T]: 0/3959/3964, diff: 0.055, 19.25MH/s yes!
[2017-08-09 01:51:56] [S/A/T]: 0/3960/3965, diff: 0.073, 19.25MH/s yes!
[2017-08-09 01:52:10] GPU#0:GeForce GTX 1060 6GB, 19.25MH/s
Intensity 24 palginmod ccminer
Good performance, but if you use krnlx mod, you can get 1 or 2 MH/s extra. BTW, I have quit signatum mining because rewards reduced.
KAF2 6GB OC
Core: 2025Mhz
Mem: 4498Mhz
Skunkhash: 19,25Mh/s
[2017-08-09 01:50:07] skunk block 30086, diff 32185.773
[2017-08-09 01:50:26] [S/A/T]: 0/3953/3958, diff: 0.658, 19.26MH/s yes!
[2017-08-09 01:50:28] [S/A/T]: 0/3954/3959, diff: 1.052, 19.26MH/s yes!
[2017-08-09 01:50:36] [S/A/T]: 0/3955/3960, diff: 0.103, 19.26MH/s yes!
[2017-08-09 01:50:37] [S/A/T]: 0/3956/3961, diff: 0.302, 19.26MH/s yes!
[2017-08-09 01:51:08] [S/A/T]: 0/3957/3962, diff: 0.117, 19.26MH/s yes!
[2017-08-09 01:51:14] [S/A/T]: 0/3958/3963, diff: 0.060, 19.25MH/s yes!
[2017-08-09 01:51:43] [S/A/T]: 0/3959/3964, diff: 0.055, 19.25MH/s yes!
[2017-08-09 01:51:56] [S/A/T]: 0/3960/3965, diff: 0.073, 19.25MH/s yes!
[2017-08-09 01:52:10] GPU#0:GeForce GTX 1060 6GB, 19.25MH/s
Intensity 24 palginmod ccminer
Core: 2025Mhz
Mem: 4498Mhz
Skunkhash: 19,25Mh/s
[2017-08-09 01:50:07] skunk block 30086, diff 32185.773
[2017-08-09 01:50:26] [S/A/T]: 0/3953/3958, diff: 0.658, 19.26MH/s yes!
[2017-08-09 01:50:28] [S/A/T]: 0/3954/3959, diff: 1.052, 19.26MH/s yes!
[2017-08-09 01:50:36] [S/A/T]: 0/3955/3960, diff: 0.103, 19.26MH/s yes!
[2017-08-09 01:50:37] [S/A/T]: 0/3956/3961, diff: 0.302, 19.26MH/s yes!
[2017-08-09 01:51:08] [S/A/T]: 0/3957/3962, diff: 0.117, 19.26MH/s yes!
[2017-08-09 01:51:14] [S/A/T]: 0/3958/3963, diff: 0.060, 19.25MH/s yes!
[2017-08-09 01:51:43] [S/A/T]: 0/3959/3964, diff: 0.055, 19.25MH/s yes!
[2017-08-09 01:51:56] [S/A/T]: 0/3960/3965, diff: 0.073, 19.25MH/s yes!
[2017-08-09 01:52:10] GPU#0:GeForce GTX 1060 6GB, 19.25MH/s
Intensity 24 palginmod ccminer
Hi all,
Thought I'd share my thoughts on this thread, I've got a mixed 6 x GTX1060 rig dual mining (3 x MSI gaming x), (3 x EVGA 1060), combined ETH 143HMs, and SIA 1445MHs, dual mining with claymore v9.8. I've found that the dual mining performance of the MSI gaming x cards is amazing, comparable to the RX480 when mining for SIA. I have an RX480 card with modded bios and the SIA hashrate is about the same as the gaming X cards, the GTX1060 is actually slightly faster truth be told on SIA. These are OC'd I use the nvidia inspector tool with an OC batch script on the command line. If anyone needs any help with this on their 1060's drop me a line.
https://pasteboard.co/GEJS7TC.png
Thought I'd share my thoughts on this thread, I've got a mixed 6 x GTX1060 rig dual mining (3 x MSI gaming x), (3 x EVGA 1060), combined ETH 143HMs, and SIA 1445MHs, dual mining with claymore v9.8. I've found that the dual mining performance of the MSI gaming x cards is amazing, comparable to the RX480 when mining for SIA. I have an RX480 card with modded bios and the SIA hashrate is about the same as the gaming X cards, the GTX1060 is actually slightly faster truth be told on SIA. These are OC'd I use the nvidia inspector tool with an OC batch script on the command line. If anyone needs any help with this on their 1060's drop me a line.
https://pasteboard.co/GEJS7TC.png
you can get a rx480 doing more if you put a higher core speed. maybe your bios is a low power one. how much is your 1060 rig getting from the wall?
Hi all,
Thought I'd share my thoughts on this thread, I've got a mixed 6 x GTX1060 rig dual mining (3 x MSI gaming x), (3 x EVGA 1060), combined ETH 143HMs, and SIA 1445MHs, dual mining with claymore v9.8. I've found that the dual mining performance of the MSI gaming x cards is amazing, comparable to the RX480 when mining for SIA. I have an RX480 card with modded bios and the SIA hashrate is about the same as the gaming X cards, the GTX1060 is actually slightly faster truth be told on SIA. These are OC'd I use the nvidia inspector tool with an OC batch script on the command line. If anyone needs any help with this on their 1060's drop me a line.
https://pasteboard.co/GEJS7TC.png
Thought I'd share my thoughts on this thread, I've got a mixed 6 x GTX1060 rig dual mining (3 x MSI gaming x), (3 x EVGA 1060), combined ETH 143HMs, and SIA 1445MHs, dual mining with claymore v9.8. I've found that the dual mining performance of the MSI gaming x cards is amazing, comparable to the RX480 when mining for SIA. I have an RX480 card with modded bios and the SIA hashrate is about the same as the gaming X cards, the GTX1060 is actually slightly faster truth be told on SIA. These are OC'd I use the nvidia inspector tool with an OC batch script on the command line. If anyone needs any help with this on their 1060's drop me a line.
https://pasteboard.co/GEJS7TC.png
sigt from 18 to 20
Did you use any mod miner or did you overclock your 1060? If overclock, do you mind to share your settings?
How is your speed?
Mine at 11mh/s with ccminer and 16mh/s with palginmod ccminer. I heard that krnlx mod version run better, but no windows binary to test yet.
sigt from 18 to 20
Did you use any mod miner or did you overclock your 1060? If overclock, do you mind to share your settings?
How is your speed?
sigt from 18 to 20
Did you use any mod miner or did you overclock your 1060? If overclock, do you mind to share your settings?
Jump to: