GTX 1060 discussion thread - page 65.

blissz

sr. member

Activity: 336

Merit: 258

Quote from: n4ru on July 08, 2017, 09:16:46 PM

Quote from: blissz on July 07, 2017, 04:32:30 PM

got 6 Gigabyte 1060 3gb mini's

They do exactly 20 Mh/s ETH each. (overclocked mem) Those are shipped with Hynix, but it's okish. With samsung chips I think you can expect 22 Mh/s.

Each of my Gigabyte 3GB Minis gets 25MH/s.

You're lucky they are shipped with samsung memory I think? (gpu-z will show)
What miner? Thanks

BHTeam

full member

Activity: 336

Merit: 100

https://www.crypto-coinz.net

Hi guys,

anyone using EVGA GeForce GTX 1060 GAMING, 03G-P4-6160-KR, 3GB GDDR5, ACX 2.0 (Single Fan) ?
What results can I expect from those and is the fan at 100% going to be enough? I am thinking of getting Arctic Accelero Mono PLUS for all my cards when they arrive. Anyone using this cooler?
And what are the best OC you guys are getting?

systemv

member

Activity: 84

Merit: 10

StuffGoGo Developer

20.97, latest --cuda-parallel-hash option not affecting it a lot. Playing games is much more fun on it

pr0ximus

full member

Activity: 142

Merit: 100

Quote from: n4ru on July 08, 2017, 09:16:46 PM

Quote from: blissz on July 07, 2017, 04:32:30 PM

got 6 Gigabyte 1060 3gb mini's

They do exactly 20 Mh/s ETH each. (overclocked mem) Those are shipped with Hynix, but it's okish. With samsung chips I think you can expect 22 Mh/s.

Each of my Gigabyte 3GB Minis gets 25MH/s.

mind sharing your setup/config?

n4ru

sr. member

Activity: 350

Merit: 250

Quote from: blissz on July 07, 2017, 04:32:30 PM

got 6 Gigabyte 1060 3gb mini's

They do exactly 20 Mh/s ETH each. (overclocked mem) Those are shipped with Hynix, but it's okish. With samsung chips I think you can expect 22 Mh/s.

Each of my Gigabyte 3GB Minis gets 25MH/s.

ssdaytona

newbie

Activity: 20

Merit: 0

anyone try out the new 9GBs memory 1060's yet?

candyiman

full member

Activity: 308

Merit: 100

Quote from: ?? on ??

Quote from: candyiman on July 07, 2017, 04:47:13 PM

Quote from: ?? on ??

Quote from: candyiman on July 07, 2017, 04:27:51 PM

Quote from: ?? on ??

Here is what I am doing just thought I'd share:

4 x EVGA GeForce GTX 1060 SSC 6GB Cards

65% power
-200 core
+1000 memory
Runs at ~51C
Fans stay at ~55-60%

- Windows 7 64-bit
- 8Gb RAM
- Latest Nvidia drivers

HashRates:

23+ mh/s per card using Claymore rev 9.6
23-26.5 mh/s per card using Genoil NVIDIA optimized

AMazing All Samsung memory I assume

QUestion did it run more than 24 hours?

Yes it has been running stable for 5 days now. Only 5 days because I tinker with it on occasion and rebooted on accident 5 days ago. Been running stable after I figured out I had to break it up into 2 genoil instances isolating one of my cards in its own instance for some reason. Prior to isolating the one card it was crashing every hour or so if I put them all in the same instance. 3 of the cards were shipped all at once, same place etc and the 4th card was a bought later from a different retailer so not sure if there is something different causing it to not play nice with the other 3.

Oh and dual mining if using claymore I get ~22.5 per card at default 30 dcred intensity. I usually just stick to the genoil miner that is optimized for the 1060s getting closer to 26 instead

I think I have the same problem tell me more about the instance I want tomorrow to set 5 of my Samsung in One instance and the 3 Hynx on another

Give me a Tip the command that you set in your Bat File

Yea try separating them out I honestly think that is the case for me as well 3 are Samsung and the other isn't didn't bother checking.

Here is the command for genoil to start 3 of the 4 cards:

Code:

--cuda-devices 0 1 2

Just figure out how the cards are numbered, it should match what afterburner is showing or claymore. Also make sure you are using -U instead of -G

although i have a Stable rig i did not manage to make 2 instances
I wrote the command --cuda-devices 0 1 2 it started perfectly fine ok started hashing after that i set in seperate miner and bat file --cuda-devices 3 4 5 and is started fine then is crashed and said something with missing dag or something and in the meantime the first Miner crashed also

What did i do wrong?

Gridden

newbie

Activity: 24

Merit: 0

Quote from: sp_ on July 06, 2017, 05:10:30 AM

Spreadcoin is the most profitable coin on the gtx 1060 3gb making $5.22 a day with sp-mod #10 (0.05BTC PM for details). This is more than they make on the 1080ti with the nicehashminer. (The nicehashminer has 50 000 users that will compete with you and take your profit)

The global hashrate is around 3000 rx 580 cards, so the coin is pretty small

(12 MUSD marketcap value on the exchanges) $35,002 24h trade volume at www.bittrex.com

http://i63.tinypic.com/2rcsrqc.png

Spreadminer sp-mod #10 in action:

http://i63.tinypic.com/dpih74.png

Hello guys, i'm new to the mining business,

I've got my KFA2 GTX 1060 6G at a stable 25 MH/s Eth and i wonder what would be the most profitable thing to mine with it.

I'm considering building a rig of 1060 6G, any advice?

I saw your post with spreadcoin. Do you have a guide or something like that to start mining it?

another question, i have a wallet for ETh, (mining on nanopool currently), do I need a wallet for each new crypto i mine or is there one that regroup more?

ty for your time guys Wink

candyiman

full member

Activity: 308

Merit: 100

Quote from: ?? on ??

Quote from: candyiman on July 07, 2017, 04:27:51 PM

Quote from: ?? on ??

Here is what I am doing just thought I'd share:

4 x EVGA GeForce GTX 1060 SSC 6GB Cards

65% power
-200 core
+1000 memory
Runs at ~51C
Fans stay at ~55-60%

- Windows 7 64-bit
- 8Gb RAM
- Latest Nvidia drivers

HashRates:

23+ mh/s per card using Claymore rev 9.6
23-26.5 mh/s per card using Genoil NVIDIA optimized

AMazing All Samsung memory I assume

QUestion did it run more than 24 hours?

Yes it has been running stable for 5 days now. Only 5 days because I tinker with it on occasion and rebooted on accident 5 days ago. Been running stable after I figured out I had to break it up into 2 genoil instances isolating one of my cards in its own instance for some reason. Prior to isolating the one card it was crashing every hour or so if I put them all in the same instance. 3 of the cards were shipped all at once, same place etc and the 4th card was a bought later from a different retailer so not sure if there is something different causing it to not play nice with the other 3.

Oh and dual mining if using claymore I get ~22.5 per card at default 30 dcred intensity. I usually just stick to the genoil miner that is optimized for the 1060s getting closer to 26 instead

I think I have the same problem tell me more about the instance I want tomorrow to set 5 of my Samsung in One instance and the 3 Hynx on another

Give me a Tip the command that you set in your Bat File

blissz

sr. member

Activity: 336

Merit: 258

got 6 Gigabyte 1060 3gb mini's

They do exactly 20 Mh/s ETH each. (overclocked mem) Those are shipped with Hynix, but it's okish. With samsung chips I think you can expect 22 Mh/s.

gt_addict

hero member

Activity: 2534

Merit: 623

I keep getting " gpuminer cu_k1 failed 4" when running my two asus cards (micron) and it restarts. Huh

candyiman

full member

Activity: 308

Merit: 100

Quote from: ?? on ??

Here is what I am doing just thought I'd share:

4 x EVGA GeForce GTX 1060 SSC 6GB Cards

65% power
-200 core
+1000 memory
Runs at ~51C
Fans stay at ~55-60%

- Windows 7 64-bit
- 8Gb RAM
- Latest Nvidia drivers

HashRates:

23+ mh/s per card using Claymore rev 9.6
23-26.5 mh/s per card using Genoil NVIDIA optimized

AMazing All Samsung memory I assume

QUestion did it run more than 24 hours?

candyiman

full member

Activity: 308

Merit: 100

Guy I Believe it is Better to List the settings based on Samsung, micron and FUCKING hynix memory

Example

Stable Settings

KFA2 1060 3g OC
Hynix

Power Limit 75%
Core clock 0
Memory Clock +300

Eth 18,3

Genoil Optimized miner

ny2cafuse

legendary

Activity: 1582

Merit: 1002

HODL for life.

Quote from: gt_addict on July 07, 2017, 01:41:55 PM

That is one card, EVERY card has the chance to get any of the three memory types.

Then I won the lotto, because GPU-Z shows Samsung for all the ones I bought Grin

.

Good to know!

-Fuse

promomei

sr. member

Activity: 399

Merit: 254

Hey guys anybody have mined with ROG STRIX-GTX1060-O6G-GAMING mining
Huh

How is is

gt_addict

hero member

Activity: 2534

Merit: 623

Quote from: ny2cafuse on July 07, 2017, 12:00:28 PM

Quote from: stna1981 on July 07, 2017, 09:21:58 AM

Most (or all?) cards that are shipped currently seem to have Hynix memory, really bad...

Zotac cards are running with Samsung memory. If you want to find out what memory a GPU card is using, google image search the card name + "GPU-Z". So for "Zotac 1060 GPU-Z", you'll get image search results that look like this:

This is how I determined which cards to avoid. Plus Zotac cards seem to be in stock on Amazon more often, so double win.

-Fuse

That is one card, EVERY card has the chance to get any of the three memory types.

thesavoyard

sr. member

Activity: 560

Merit: 253

GTX 1060 3gb I'm getting 310 on equihash. That's only a 9 below a high-end 6gb, not worth spending more IMO.

stna1981

member

Activity: 140

Merit: 10

No. Got 3 Zotacs, 1 Samsung, 2 Hynix.
Got 6 Gainward from 2 different sellers. All Hynix.
You just can't tell upfront.

ny2cafuse

legendary

Activity: 1582

Merit: 1002

HODL for life.

Quote from: stna1981 on July 07, 2017, 09:21:58 AM

Most (or all?) cards that are shipped currently seem to have Hynix memory, really bad...

Zotac cards are running with Samsung memory. If you want to find out what memory a GPU card is using, google image search the card name + "GPU-Z". So for "Zotac 1060 GPU-Z", you'll get image search results that look like this:

This is how I determined which cards to avoid. Plus Zotac cards seem to be in stock on Amazon more often, so double win.

-Fuse

stna1981

member

Activity: 140

Merit: 10

Most (or all?) cards that are shipped currently seem to have Hynix memory, really bad...

Topic: GTX 1060 discussion thread - page 65. (Read 289429 times)