Pages:
Author

Topic: GTX 1060 discussion thread - page 63. (Read 289429 times)

sr. member
Activity: 756
Merit: 250
July 25, 2017, 12:11:21 AM
Is there any way to predict if I can get 24MH? I can buy Palit, KFA2, ASUS or Gigabyte all 3GB.


where you can find these cards?HuhHuh impossible to find any rn

i paid all my 21 cards about 177 euro each





this is the proof

Now starting from 220euro...


You wish.... impossible to find any... and if you find one it costs 280/300
newbie
Activity: 36
Merit: 0
July 24, 2017, 07:48:16 AM
Is there any way to predict if I can get 24MH? I can buy Palit, KFA2, ASUS or Gigabyte all 3GB.


where you can find these cards?HuhHuh impossible to find any rn

i paid all my 21 cards about 177 euro each


https://s13.postimg.org/mhbwdt3xv/Cattura.jpg


this is the proof

Now starting from 220euro...
member
Activity: 140
Merit: 10
July 24, 2017, 07:08:50 AM
From 270 to 470 is almost impossible as this would mean the cards consume 180W, a GTX1060 can't use that much power?!
newbie
Activity: 9
Merit: 0
July 24, 2017, 06:41:53 AM
Hey,
TDP is at 70%

firstly it was 72W fo 6GB and 80W for 3GB and now I don't know what happened.
sr. member
Activity: 756
Merit: 250
July 24, 2017, 06:35:04 AM
Hey I have problem
I got 1x GTX1060 aSUS DUAL 6gb and 1x GTX 1060 3GB GIGABYTE

They both drain 470W  at the wall.
At the beginning it was around 270W, I don't know why it started to take so much.Any solutions?

strange...

mine drain 80w each from the wall you put tdp to 55%?
newbie
Activity: 9
Merit: 0
July 24, 2017, 05:47:34 AM
Hey I have problem
I got 1x GTX1060 aSUS DUAL 6gb and 1x GTX 1060 3GB GIGABYTE

They both drain 470W  at the wall.
At the beginning it was around 270W, I don't know why it started to take so much.Any solutions?
sr. member
Activity: 756
Merit: 250
July 23, 2017, 04:24:44 PM
Is there any way to predict if I can get 24MH? I can buy Palit, KFA2, ASUS or Gigabyte all 3GB.


where you can find these cards?HuhHuh impossible to find any rn

i paid all my 21 cards about 177 euro each





this is the proof
sr. member
Activity: 756
Merit: 250
July 23, 2017, 04:23:49 PM
actually i am gettin 24.7 mh on all my 1060 3gb cards. i have 21 cards all samsung memory

claymore 9.7 24.7
ethminer 1060 mod 25mh
member
Activity: 140
Merit: 10
July 14, 2017, 08:07:06 AM
No.
newbie
Activity: 36
Merit: 0
July 14, 2017, 07:52:31 AM
Is there any way to predict if I can get 24MH? I can buy Palit, KFA2, ASUS or Gigabyte all 3GB.
full member
Activity: 142
Merit: 100
July 14, 2017, 04:31:05 AM
1060 3GB - Samsung Memory.

Running at 24MH with OC.

I've managed to get 24.8MH on these cards running stable but that's a lotta OC settings than I'm relaxed with. I'm doing 24.2-24.3MH/s average on 6GPU's now.


Why do you keep your fans at 97% and not sure if you observed or not, 1 of your fan is at 0% too (or did you set it to 0% too?).
full member
Activity: 322
Merit: 102
July 14, 2017, 04:18:23 AM
Zotac P106-100 (Single Fan)

Efficient Max Performance:

25Mh/s on Eth running @ 85-90w (on the wall)

Temp: 55-60C

Fans: 80%
newbie
Activity: 6
Merit: 0
July 14, 2017, 04:16:44 AM
1060 3g hyrix, 80% TDP, core -200, men+600,19.5mh/s, so bad. claymore 9.7
if i set mem +650,it crashs.


using claymore this happen

using ethminer 1060 mod will give u more speed

mine is 65% tdp
+100 core +880 memory getting 25mh on ethminer!!!

Same here, Claymore definitely worse at MH/s than Ethminer. I'm using 0.11.0.
newbie
Activity: 2
Merit: 0
July 14, 2017, 02:44:47 AM
1060 3GB - Samsung Memory.

Running at 24MH with OC.

I've managed to get 24.8MH on these cards running stable but that's a lotta OC settings than I'm relaxed with. I'm doing 24.2-24.3MH/s average on 6GPU's now.

https://i.imgur.com/Y9Wddn0.png
newbie
Activity: 4
Merit: 0
July 13, 2017, 05:47:44 PM
I have one of those on a 4 card rig and I can't even get 5 cards to run on it. I use the Z270-A. It has 7 PCI e and 2x M.2 that can be turned into 4 more PCI e expansions.


newbie
Activity: 59
Merit: 0
July 13, 2017, 04:21:32 PM
I currently did same Bios with 9 cards and it's running stable.

Here is what I changed to get more cards registered:
-Update bios
-DMI Max Link Speed [Auto]->[Gen2]
-PCIEX16_1 Link Speed [Auto]->[Gen2]
-PCIEX16_2 Link Speed [Auto]->[Gen2]
PCIe Speed [Auto]->[Gen2]
HD Audio Controller [Enabled]->[Disabled] (Not sure if this actually has anything to do with getting cards running)
Above 4G Decoding [Disabled]->[Enabled]


All the above can be found in the Advanced setup of the bios. Except for Above 4G Decoding which is in boot menu of bios.   


Hope this helps.



So you think I can get 6 cards working with a Z170A Pro gaming carbon.  We have 5 running now. We are using the gtx 1060 6gb dual fan gpus?
newbie
Activity: 4
Merit: 0
July 13, 2017, 01:10:11 PM
I currently did same Bios with 9 cards and it's running stable.

Here is what I changed to get more cards registered:
-Update bios
-DMI Max Link Speed [Auto]->[Gen2]
-PCIEX16_1 Link Speed [Auto]->[Gen2]
-PCIEX16_2 Link Speed [Auto]->[Gen2]
PCIe Speed [Auto]->[Gen2]
HD Audio Controller [Enabled]->[Disabled] (Not sure if this actually has anything to do with getting cards running)
Above 4G Decoding [Disabled]->[Enabled]


All the above can be found in the Advanced setup of the bios. Except for Above 4G Decoding which is in boot menu of bios.   


Hope this helps.

newbie
Activity: 59
Merit: 0
July 13, 2017, 09:40:01 AM
1060 3g hyrix, 80% TDP, core -200, men+600,19.5mh/s, so bad. claymore 9.7
if i set mem +650,it crashs.


using claymore this happen

using ethminer 1060 mod will give u more speed

mine is 65% tdp
+100 core +880 memory getting 25mh on ethminer!!!

Hello everyone,

I'm super new to this mining thing so please bare with my stupidity.

I'm running:
 6x evga 1060 6gb ssc on simple mining os (Have 8 cards total but waiting on Dual PSU Adapter)
Getting 25-25.15 MH/s per card
Claymore-eth-v9.7

Overclocking settings:
Core -100
Memory +1900 (which would be +950 on afterburner)
Power limit 73
Target temp 80
Fan speed 50%

Output is 73w per card and 515w for whole rig
All cards are ranging from 35C-43C

Rig:
Z270-A
Pentium G4400
G.Skill TridentZ 8gb ram
EVGA 1000w GQ

Am I doing this right or is this overclock killing my GPU's? Any advice for this newbie would help. Thank you.
   

Yeah that's about as good as it gets. How did you get the mobo to recognize more than 5 cards? I had to RMA it.


Yeah I am having the same issue.  My rig is not recognizing the 6th card. I have seen it work, and was wondering if anyone had a solution to this issue. Thanks in advance.
member
Activity: 114
Merit: 10
July 13, 2017, 09:14:33 AM
Hi guys, which cuda miner gives the more hashrate at this moment pls ?

thanks inadvance
hero member
Activity: 2534
Merit: 623
July 12, 2017, 04:59:21 PM
Ive fot asus gtx1060 6gb woth micron memory and im running 60%Power, 75deg temp limit, +125core clock, +750mem clock 40%fans (card temps are around 50c) and getting 24Mh on claymore v9.7 ETH only

So yes you shoukd be able to oc some more. All that should happen if anythjng is wrong is the computer will crash. I tried +800mem and 70%power and it crashed immediately.

n.b. All settings are on MSI Afterburner.
Pages:
Jump to: