GTX1080ti's: Better Options? - page 7.

jwarren81

full member

Activity: 211

Merit: 100

Something's wrong with your setup then. What are you running? Cards? Miner? Overclock?

How long did you let the miner run? It takes time for the hashrate stats on the pool to show full speed. But if your miner is showing accepted shares and full speed, then the pool will reflect that after sometime. Its basing the hashrate on submitted shares so it takes time to ramp up.

I get 420 sol/s with EWBF miner on GTX 1070's. -25% TDP is my only adjustment on the cards.

Fired up my EWBF just to show:

From my zpool:

Storx

full member

Activity: 322

Merit: 233

Quote from: jwarren81 on June 01, 2017, 12:39:49 AM

I don't know about any of that . . . I just know I've averaged $100 a day for the last 9 days, from two rigs on zpool. I can't really argue with it. Grin

Quote from: dt8666 on June 01, 2017, 12:26:20 AM

Quote from: jwarren81 on May 31, 2017, 11:22:18 PM

I've been using zpool for months with consistent daily payments. It's very reliable.

Most of the instances I've seen of people complaining about them, simply didn't understand how the pool works. Ask questions if you are unsure how things are working.

MiningPoolHub also has skein and can auto exchange to BTC. It works differently than zpool since you point to your account and then configure things on their website to enable auto exchange and set your wallets.

Quote from: dt8666 on May 31, 2017, 05:55:20 PM

What is your experience on zpool? So many are commenting it"stealing"?
Do we have other pool that do good on skien for those that only have BTC wallet?

Actually I tried zpool and from the minded Bytecoin number and I comparing to the BTC value with Poloniex, I can see that it has 30% less. Not sure where are this 30% goes. Also have to pay for transfer fee too.

Really not sure. Might try out minipoolhub.

I am sure many experience minor can share what should be so we can cut short the learning. lol

LOL, i just literally spent the last hour and half playing with setting up Zcash on Zpool, I finally got it running after not really knowing what i was doing at first.. but the rate was just god awful, it was saying i was only working at 90Sols/S

jwarren81

full member

Activity: 211

Merit: 100

I don't know about any of that . . . I just know I've averaged $100 a day for the last 9 days, from two rigs on zpool. I can't really argue with it. Grin

Quote from: dt8666 on June 01, 2017, 12:26:20 AM

Quote from: jwarren81 on May 31, 2017, 11:22:18 PM

I've been using zpool for months with consistent daily payments. It's very reliable.

Most of the instances I've seen of people complaining about them, simply didn't understand how the pool works. Ask questions if you are unsure how things are working.

MiningPoolHub also has skein and can auto exchange to BTC. It works differently than zpool since you point to your account and then configure things on their website to enable auto exchange and set your wallets.

Quote from: dt8666 on May 31, 2017, 05:55:20 PM

What is your experience on zpool? So many are commenting it"stealing"?
Do we have other pool that do good on skien for those that only have BTC wallet?

Actually I tried zpool and from the minded Bytecoin number and I comparing to the BTC value with Poloniex, I can see that it has 30% less. Not sure where are this 30% goes. Also have to pay for transfer fee too.

Really not sure. Might try out minipoolhub.

I am sure many experience minor can share what should be so we can cut short the learning. lol

dt8666

full member

Activity: 302

Merit: 102

Mining with noise and without noise is all possibl

Quote from: jwarren81 on May 31, 2017, 11:22:18 PM

I've been using zpool for months with consistent daily payments. It's very reliable.

Most of the instances I've seen of people complaining about them, simply didn't understand how the pool works. Ask questions if you are unsure how things are working.

MiningPoolHub also has skein and can auto exchange to BTC. It works differently than zpool since you point to your account and then configure things on their website to enable auto exchange and set your wallets.

Quote from: dt8666 on May 31, 2017, 05:55:20 PM

What is your experience on zpool? So many are commenting it"stealing"?
Do we have other pool that do good on skien for those that only have BTC wallet?

Actually I tried zpool and from the minded Bytecoin number and I comparing to the BTC value with Poloniex, I can see that it has 30% less. Not sure where are this 30% goes. Also have to pay for transfer fee too.

Really not sure. Might try out minipoolhub.

I am sure many experience minor can share what should be so we can cut short the learning. lol

VoskCoin

sr. member

Activity: 1414

Merit: 487

YouTube.com/VoskCoin

Anyone here using this card http://www.ebay.com/itm/GIGABYTE-GeForce-GTX-1080-Ti-DirectX-12-GV-N108TGAMING-OC-11GD-11GB-352-Bit-GDDR-/292077280960?hash=item4401299ec0:g:LcEAAOSww3tY5O0d

if so whats your setup & settings?

jwarren81

full member

Activity: 211

Merit: 100

I've been using zpool for months with consistent daily payments. It's very reliable.

Most of the instances I've seen of people complaining about them, simply didn't understand how the pool works. Ask questions if you are unsure how things are working.

MiningPoolHub also has skein and can auto exchange to BTC. It works differently than zpool since you point to your account and then configure things on their website to enable auto exchange and set your wallets.

Quote from: dt8666 on May 31, 2017, 05:55:20 PM

What is your experience on zpool? So many are commenting it"stealing"?
Do we have other pool that do good on skien for those that only have BTC wallet?

zer0k

sr. member

Activity: 349

Merit: 250

Profits are constantly changing, so whenever you look them up on whattomine.com etc. you need to remember that is just the current profitability.

It's always just a snapshot, and can change by the minute, so an autoswitcher like nicehash may look like it's jumping to something less profitable but it's using it's own logic to determine whats best

dt8666

full member

Activity: 302

Merit: 102

Mining with noise and without noise is all possibl

Quote from: JaredKaragen on May 31, 2017, 12:43:24 PM

yeah, the NH miner is useful for the laymen, but not the best IMHO.

Basically, just grab the ccmineralexis78.exe file (as mentioned in my link), copy the batch file and paste it into a new .bat file with ccminer... and just update your BTC payout address and ID tag at the top of the batch.

If you don't want to run the manual batch, or multi-algo batch, you can simply use a string like this:

skienonly.bat

Code:

:start
ccminerAlexis78.exe -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u 1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP -p i7-920-GPU,c=BTC,skein,stats
goto start

change "i7-920-GPU" to whatever you want your miner ID to be seen as (shows up on right pane in wallet page on zpool.ca) for easy ID of the miner connected (if you have multiple), and of course change the BTC address unless you feel like donating hash to my account Wink

I really love the manual batch though. If another algo's coin value moons, i just log into my old website, and change the algo name in the text file. No need to visit all my miners and update manually.

You can use the manual batch as-is with my URL; as long as you don't mind being on-board with whatever algo I am mining currently Wink

What is your experience on zpool? So many are commenting it"stealing"?
Do we have other pool that do good on skien for those that only have BTC wallet?

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

yeah, the NH miner is useful for the laymen, but not the best IMHO.

Basically, just grab the ccmineralexis78.exe file (as mentioned in my link), copy the batch file and paste it into a new .bat file with ccminer... and just update your BTC payout address and ID tag at the top of the batch.

If you don't want to run the manual batch, or multi-algo batch, you can simply use a string like this:

skienonly.bat

Code:

:start
ccminerAlexis78.exe -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u 1PHSDYvVp6HpqtuUPocK41DrdeHbbezaeP -p i7-920-GPU,c=BTC,skein,stats
goto start

change "i7-920-GPU" to whatever you want your miner ID to be seen as (shows up on right pane in wallet page on zpool.ca) for easy ID of the miner connected (if you have multiple), and of course change the BTC address unless you feel like donating hash to my account Wink

I really love the manual batch though. If another algo's coin value moons, i just log into my old website, and change the algo name in the text file. No need to visit all my miners and update manually.

You can use the manual batch as-is with my URL; as long as you don't mind being on-board with whatever algo I am mining currently Wink

Storx

full member

Activity: 322

Merit: 233

Quote from: JaredKaragen on May 31, 2017, 12:26:47 PM

OP, check the batch link in my sig. Lots of info and resources to get you going with lots of options.

Theres also a link to the original batch thread with lots more info and stuffs.

If you need any assistance past that getting started, just drop me a PM. Should be relatively painless though.

I used to be on Lyra2v2 24/7... but the block difficulty on MONA and Vert... were just too damned long, and payouts were pretty inconsistent. I felt the "bad days" a lot more than I do on skein.

That is the parts im wanting to learn, ill look into your link...

Also, Im a littler confused on the Lyra2V2, it seems to estimate the HIGHEST returns for me when its actually mining it, but when i check my nicehash status, it shows a unpaid balance on the right side as if i mined the coin properly, but its the ONLY coin that does not list an accepted speed on the left, its just all 000000000's

Storx

full member

Activity: 322

Merit: 233

Quote from: johnnymark_ on May 31, 2017, 11:36:43 AM

Is GTX 1060 3GB a good option? Which brand?

Honestly based on my lack of knowledge and just going off experience im seeing.. i would have to say no... because i have my pair of 1080ti's going on Nicehash and according to MSI Afterburner im using between 10-11GB of RAM on the GPU's with nothing else running on the PC... so going with something like 3GB, im assuming it would run super hot on VRAM, because its having to use 100% of the 3GB and constantly shuffling things around due to lack of space or it may just throttle your return on mining, because you dont have enough VRAM to utilize mining at 100% rate fully.. Honest i dont know for sure, but just telling you my results based on my GTX1080ti's

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

OP, check the batch link in my sig. Lots of info and resources to get you going with lots of options.

Theres also a link to the original batch thread with lots more info and stuffs.

If you need any assistance past that getting started, just drop me a PM. Should be relatively painless though.

I used to be on Lyra2v2 24/7... but the block difficulty on MONA and Vert... were just too damned long, and payouts were pretty inconsistent. I felt the "bad days" a lot more than I do on skein.

Storx

full member

Activity: 322

Merit: 233

Quote from: VyprBTC on May 31, 2017, 11:06:56 AM

Quote from: Storx on May 31, 2017, 10:57:25 AM

Quote from: dt8666 on May 31, 2017, 02:39:42 AM

Ok now it is clear. Its the sol/s with 2 cards.

Yes the miner sol/s may nit 100% same as NH website actual. It varies.

What are your temps on your GPU, this is the first time i have seen my water temps above 40c on my gaming rig, lastnight i left it on to mine the entire time i slept and its currently mining and my temps on my rig have stabled out at 41c with the house a/c set at 25c.

Also have you found any better mining routes for the GTX1080ti? like is their better coin to mine from your experience?

Quote from: VyprBTC on May 31, 2017, 01:29:49 AM

If you are earning $16 on Lyra2REv2 go with that - MY Skein numbers for yesterday was $14 for 2 1080TI's so you're earning $60 more a month on Lyra2 than Skein.

You can disable it from switching by going into settings then just uncheck the algo's you don't want it to run; in your case everything except Lyra2

Hey bud, could you throw me some info on how to mine for Skein, i would like to look into it and see how my actual setup deals with it.. after mining with nicehash for 12+ hours now with it set on the auto change settings, my 12+ hr profitability according to them has leveled out at $14.03/day, my profit levels dip to about half rate at random times i noticed throughout 12hrs of mining..

Also im curious if Skein could be added to the Nicehash program, in the setup instructions it mentions if the Recommended (Stable) list is unable to mine any coins, the miner will default to any custom list or custom list are able to be created for customized mining. If this is true, maybe the Skein can just be added to the rotation to be mined when profitable.. have to read more into this.

You made more than me mining on Skein then. My last 24hr avg is at $12.46 for 2 1080Ti's @ 900MH/S

Could you PM me some info on how you got Skein working, it may not be the most profitable way to go about it now, but i want to learn how to mine all the currencies, so in the future i can decide the best route based on the GPU i go with, which will be based on which route is best to mine basically..

I honestly think that the watercooling is really helping with 1080ti's, because i helped one of my good friends out on setting up his 1 solo MSI Armor 1080ti on Nicehash today after showing him the profits i so called made so far.. his is on OEM fans and Nicehash is only running at 571SOL/s @ 84c temps on his rig.. which is only like 80ish% of the rate im getting per card. We bought our GPU's together i bought them with bitcoin on Newegg and he just payed me cash value in return for his.

Megaquake

hero member

Activity: 630

Merit: 506

Quote from: johnnymark_ on May 31, 2017, 12:14:20 PM

Quote from: Megaquake on May 31, 2017, 12:06:00 PM

Quote from: johnnymark_ on May 31, 2017, 11:43:45 AM

Quote from: dt8666 on May 31, 2017, 11:41:30 AM

Quote from: johnnymark_ on May 31, 2017, 11:36:43 AM

Is GTX 1060 3GB a good option? Which brand?

Maybe some used rx 470 or 480 has better value if you hv space for more unit.

Only problem is there none available.

Good cards I use might as well sped $30 more for 6gb memory https://www.amazon.com/ZOTAC-GeForce-ZT-P10600B-10M-Compact-Graphics/dp/B01I5O5AP2

Nice. Can it be any brand? Would you buy any of this?

- Asus GeForce GTX 1060 Turbo 6GB
- Asus GeForce GTX 1060 Dual OC 6GB
- Gigabyte GeForce GTX 1060 WF OC 6GB
- Gigabyte Aorus GeForce GTX 1060 6GB 9Gbps

Yes sure these cards mining performance is near equivalent to the GTX 980

johnnymark_

member

Activity: 69

Merit: 10

Quote from: Megaquake on May 31, 2017, 12:06:00 PM

Quote from: johnnymark_ on May 31, 2017, 11:43:45 AM

Quote from: dt8666 on May 31, 2017, 11:41:30 AM

Quote from: johnnymark_ on May 31, 2017, 11:36:43 AM

Is GTX 1060 3GB a good option? Which brand?

Maybe some used rx 470 or 480 has better value if you hv space for more unit.

Only problem is there none available.

Good cards I use might as well sped $30 more for 6gb memory https://www.amazon.com/ZOTAC-GeForce-ZT-P10600B-10M-Compact-Graphics/dp/B01I5O5AP2

Nice. Can it be any brand? Would you buy any of this?

- Asus GeForce GTX 1060 Turbo 6GB
- Asus GeForce GTX 1060 Dual OC 6GB
- Gigabyte GeForce GTX 1060 WF OC 6GB
- Gigabyte Aorus GeForce GTX 1060 6GB 9Gbps

Megaquake

hero member

Activity: 630

Merit: 506

Quote from: johnnymark_ on May 31, 2017, 11:43:45 AM

Quote from: dt8666 on May 31, 2017, 11:41:30 AM

Quote from: johnnymark_ on May 31, 2017, 11:36:43 AM

Is GTX 1060 3GB a good option? Which brand?

Maybe some used rx 470 or 480 has better value if you hv space for more unit.

Only problem is there none available.

Good cards I use might as well sped $30 more for 6gb memory https://www.amazon.com/ZOTAC-GeForce-ZT-P10600B-10M-Compact-Graphics/dp/B01I5O5AP2

johnnymark_

member

Activity: 69

Merit: 10

Quote from: dt8666 on May 31, 2017, 11:41:30 AM

Quote from: johnnymark_ on May 31, 2017, 11:36:43 AM

Is GTX 1060 3GB a good option? Which brand?

Maybe some used rx 470 or 480 has better value if you hv space for more unit.

Only problem is there none available.

dt8666

full member

Activity: 302

Merit: 102

Mining with noise and without noise is all possibl

Quote from: johnnymark_ on May 31, 2017, 11:36:43 AM

Is GTX 1060 3GB a good option? Which brand?

Maybe some used rx 470 or 480 has better value if you hv space for more unit.

johnnymark_

member

Activity: 69

Merit: 10

Is GTX 1060 3GB a good option? Which brand?

VyprBTC

full member

Activity: 350

Merit: 100

Quote from: Storx on May 31, 2017, 10:57:25 AM

Quote from: dt8666 on May 31, 2017, 02:39:42 AM

Ok now it is clear. Its the sol/s with 2 cards.

Yes the miner sol/s may nit 100% same as NH website actual. It varies.

What are your temps on your GPU, this is the first time i have seen my water temps above 40c on my gaming rig, lastnight i left it on to mine the entire time i slept and its currently mining and my temps on my rig have stabled out at 41c with the house a/c set at 25c.

Also have you found any better mining routes for the GTX1080ti? like is their better coin to mine from your experience?

Quote from: VyprBTC on May 31, 2017, 01:29:49 AM

If you are earning $16 on Lyra2REv2 go with that - MY Skein numbers for yesterday was $14 for 2 1080TI's so you're earning $60 more a month on Lyra2 than Skein.

You can disable it from switching by going into settings then just uncheck the algo's you don't want it to run; in your case everything except Lyra2

Hey bud, could you throw me some info on how to mine for Skein, i would like to look into it and see how my actual setup deals with it.. after mining with nicehash for 12+ hours now with it set on the auto change settings, my 12+ hr profitability according to them has leveled out at $14.03/day, my profit levels dip to about half rate at random times i noticed throughout 12hrs of mining..

Also im curious if Skein could be added to the Nicehash program, in the setup instructions it mentions if the Recommended (Stable) list is unable to mine any coins, the miner will default to any custom list or custom list are able to be created for customized mining. If this is true, maybe the Skein can just be added to the rotation to be mined when profitable.. have to read more into this.

You made more than me mining on Skein then. My last 24hr avg is at $12.46 for 2 1080Ti's @ 900MH/S

Topic: GTX1080ti's: Better Options? - page 7. (Read 13602 times)