Topic: GUI mining - updated Dec 3 with 7970 bugfix, also supports Stratum! - page 20. (Read 3232240 times)
August 24, 2011, 07:49:30 PM
.5 BTC sent as a donation to Kiv for the update.
August 24, 2011, 07:24:20 PM
well im getting 323 on both my 5830s and 223 on my 5770. was getting 320 and 220
using win7 opencl. 11.7 and sdk 2.3
and thanks for the update
using win7 opencl. 11.7 and sdk 2.3
and thanks for the update
August 24, 2011, 07:14:00 PM
very very slight increase on 6950x2 at 437-438 mh/s in the same board with a 5850 that stayed the same at 396-397 mh/s
August 24, 2011, 07:04:56 PM
phoenix 1.5 with newest phatk. Using AMD 11.6 drivers on win7 x64.
2 5830 in the box with dual core proc but both processes tied down to one core..
i get better performance than this new release.
323 mh/s per card with my custom job.
318-319 mh/s per card with this new release.
it seems to me you have not really taken a good look at phatk 2.2.
Er.. yes you have. one just needs to switch to phatk2 in the command line args!!!
so basically upgrading phoenix, only for me personally, was not really needed like
I mentioned in a diff post unless you wanted new args to phoenix binary.
time to try it with some 6950s.
nice job.
2 5830 in the box with dual core proc but both processes tied down to one core..
i get better performance than this new release.
323 mh/s per card with my custom job.
318-319 mh/s per card with this new release.
it seems to me you have not really taken a good look at phatk 2.2.
Er.. yes you have. one just needs to switch to phatk2 in the command line args!!!
so basically upgrading phoenix, only for me personally, was not really needed like
I mentioned in a diff post unless you wanted new args to phoenix binary.
time to try it with some 6950s.
nice job.
August 24, 2011, 06:23:49 PM
New bugfix release is out! Thanks to everyone for your patience and prompt bug reporting.
guiminer-20110824.exe (stable)
Changes:
- Fix accepted shares not being recognized under the newest poclbm version
- Fix balance not being recognized for slush's pool
guiminer-20110824.exe (stable)
Changes:
- Fix accepted shares not being recognized under the newest poclbm version
- Fix balance not being recognized for slush's pool
August 24, 2011, 04:57:21 PM
Can't wait for updated updated version with fixed share display! I'm antsy to use new phoenix.
August 24, 2011, 03:00:43 PM
My shares are stuck at 0(0) now. 
i had same issue, so im using earlier version for mining
been using for about 12hrs 5share/11 stale but really done like 10k so dont worry for now
August 24, 2011, 02:49:33 PM
Thanks for the issue reports guys, I'll look into it and do another release today or tomorrow. Guess I didn't test thoroughly enough... maybe I should have dedicated beta testers or something.
Known issues so far are:
- slush pool refresh balance missing
- shares accepted staying at 0
- "AttributeError: 'HttpTransport' object has no attribute 'failure'"
Known issues so far are:
- slush pool refresh balance missing
- shares accepted staying at 0
- "AttributeError: 'HttpTransport' object has no attribute 'failure'"
August 24, 2011, 02:47:46 PM
My shares are stuck at 0(0) now.
i had same issue, so im using earlier version for mining
August 24, 2011, 01:59:24 PM
My shares are stuck at 0(0) now.
August 24, 2011, 11:05:34 AM
Wonder "I know it could be done" if a Settings/Options could be created then a check box for if you want or don't want the refresh button, along with w/e else options, instead of removing it completely. Give the end user the decision to have it hidden or shown.
August 24, 2011, 08:12:50 AM
Only thing I've noticed was a 2-4 mhash/s drop, and refresh balance button was gone along with slush's pool set to Other.
Went back to v2001-07-01.
Went back to v2001-07-01.
I think this is the same problem I've got, please pardon me if you've answered this but I can't see an explanation reading your posts. Is it just a bug with my system or has the refresh balance for slush's pool disappeared? I don't run it through "other" either, just curious why this has been removed if it's not a problem on my end.
August 24, 2011, 06:41:06 AM
Only thing I've noticed was a 2-4 mhash/s drop, and refresh balance button was gone along with slush's pool set to Other.
Went back to v2001-07-01.
Went back to v2001-07-01.
I think this is the same problem I've got, please pardon me if you've answered this but I can't see an explanation reading your posts. Is it just a bug with my system or has the refresh balance for slush's pool disappeared? I don't run it through "other" either, just curious why this has been removed if it's not a problem on my end.
August 24, 2011, 05:57:15 AM
The GUIMiner doesn't have the latest version of Ufasoft CPU miner. It took me several hours to figure out. Please add this to the download.
It is not included in the 082311 version but here is the link to the ufasoft forum message https://bitcointalksearch.org/topic/ufasoft-miner-windowslinux-x86x64-sse2opencl-open-source-3486
It is still supported, but not included in the distro.
I realize you were referring to the old version just putting this here for the ones that used it in the past (and to bump this new version, couldn't find it in the forum
).--------------------------------------------------
I am also not showing shares accepted updating (useing a preset, or a custom built entry to a pool)... but they are indeed being accepted on the pool (verified on worker status page at the pool website).
August 23, 2011, 09:14:55 PM
alot of issues here with the new update.
2011-08-23 22:13:21: Listener for "5970G1": Traceback (most recent call last):
2011-08-23 22:13:21: Listener for "5970G1": File "poclbm.py", line 67, in
2011-08-23 22:13:21: Listener for "5970G1": File "BitcoinMiner.pyo", line 32, in __init__
2011-08-23 22:13:21: Listener for "5970G1": File "HttpTransport.pyo", line 20, in __init__
2011-08-23 22:13:21: Listener for "5970G1": File "Transport.pyo", line 46, in __init__
2011-08-23 22:13:21: Listener for "5970G1": AttributeError: 'HttpTransport' object has no attribute 'failure'
2011-08-23 22:13:21: Listener for "5870": Traceback (most recent call last):
2011-08-23 22:13:21: Listener for "5870": File "poclbm.py", line 67, in
2011-08-23 22:13:21: Listener for "5870": File "BitcoinMiner.pyo", line 32, in __init__
2011-08-23 22:13:21: Listener for "5870": File "HttpTransport.pyo", line 20, in __init__
2011-08-23 22:13:21: Listener for "5870": File "Transport.pyo", line 46, in __init__
2011-08-23 22:13:21: Listener for "5870": AttributeError: 'HttpTransport' object has no attribute 'failure'
2011-08-23 22:13:21: Listener for "5970G2": Traceback (most recent call last):
2011-08-23 22:13:21: Listener for "5970G2": File "poclbm.py", line 67, in
2011-08-23 22:13:21: Listener for "5970G2": File "BitcoinMiner.pyo", line 32, in __init__
2011-08-23 22:13:21: Listener for "5970G2": File "HttpTransport.pyo", line 20, in __init__
2011-08-23 22:13:21: Listener for "5970G2": File "Transport.pyo", line 46, in __init__
2011-08-23 22:13:21: Listener for "5970G2": AttributeError: 'HttpTransport' object has no attribute 'failure'
2011-08-23 22:13:21: Listener for "5970G1": Traceback (most recent call last):
2011-08-23 22:13:21: Listener for "5970G1": File "poclbm.py", line 67, in
2011-08-23 22:13:21: Listener for "5970G1": File "BitcoinMiner.pyo", line 32, in __init__
2011-08-23 22:13:21: Listener for "5970G1": File "HttpTransport.pyo", line 20, in __init__
2011-08-23 22:13:21: Listener for "5970G1": File "Transport.pyo", line 46, in __init__
2011-08-23 22:13:21: Listener for "5970G1": AttributeError: 'HttpTransport' object has no attribute 'failure'
2011-08-23 22:13:21: Listener for "5870": Traceback (most recent call last):
2011-08-23 22:13:21: Listener for "5870": File "poclbm.py", line 67, in
2011-08-23 22:13:21: Listener for "5870": File "BitcoinMiner.pyo", line 32, in __init__
2011-08-23 22:13:21: Listener for "5870": File "HttpTransport.pyo", line 20, in __init__
2011-08-23 22:13:21: Listener for "5870": File "Transport.pyo", line 46, in __init__
2011-08-23 22:13:21: Listener for "5870": AttributeError: 'HttpTransport' object has no attribute 'failure'
2011-08-23 22:13:21: Listener for "5970G2": Traceback (most recent call last):
2011-08-23 22:13:21: Listener for "5970G2": File "poclbm.py", line 67, in
2011-08-23 22:13:21: Listener for "5970G2": File "BitcoinMiner.pyo", line 32, in __init__
2011-08-23 22:13:21: Listener for "5970G2": File "HttpTransport.pyo", line 20, in __init__
2011-08-23 22:13:21: Listener for "5970G2": File "Transport.pyo", line 46, in __init__
2011-08-23 22:13:21: Listener for "5970G2": AttributeError: 'HttpTransport' object has no attribute 'failure'
August 23, 2011, 05:33:55 PM
its weird how it doesnt list share but im happy with the increase of hash thanks
August 23, 2011, 05:15:45 PM
Is there a way to set up GUIMiner to restart crashed/frozen miners in the case of unstable overclocks? I'm trying to max out my system, and it really frustrated me to set an OC, go to work, and come back 8 hours later to learned the miner froze 10 minutes into mining because the display driver had to reset and recover.
Not really unless you set up a task to kill and restart GUIminer every 30 minutes to an hour so you don't lose that much mining time. It's probably better to not set clocks to unknown levels unless you can let it run and watch it for a few hours. Usually if you go too high it'll crash right away or within an hour or so.
Also, just a thought. Totally overclocking your cards to the extremes for a few extra MH isn't really worth it in the long run. Say you can squeeze another 20 MH out of it, that equates to a whopping .32 BTC / month at the current difficulty. While it may seem good, if you have to replace the card after 4-6 months, is it really worth the 1-2 extra BTC?
Not to mention an overclock that nets you an extra 20mhz is going to make the card use a lot more power, so your MH per Watt goes down.
I actually underclock my cards to get the sweet spot between power consumption and hash rate.
August 23, 2011, 05:03:02 PM
Only thing I've noticed was a 2-4 mhash/s drop, and refresh balance button was gone along with slush's pool set to Other.
Went back to v2001-07-01.
Went back to v2001-07-01.
August 23, 2011, 02:58:36 PM
Yeah, I've seen some minor speed increases as well. Not a lot, but still a nice:
- 6950: ~ 2 MH/s
- 5830: ~ 2-4 MH/s
- 5770: ~ 2-3 MH/s
August 23, 2011, 02:53:23 PM
Maybe it's just me, but I've updated 2 machines with the new client and it appears to be working fine using the OpenCL miner, but I don't see the Stale/Accepted numbers updating on the summary page and they're all just sitting at 0.
I also can't see the Stale and Accepted numbers but.....On another note,I would also like to clearly state this gave me a good performance increase on both my Radeon 6950 and Radeon 5770 by 2 Mh a sec. for each.I highly recommend this download.I had more than .5 btc earlier on but don't have it anymore but will still send something later when I've mined enough as still good work.
Jump to: