i am connecting to oscoin
i have my conf file setup
rpcallowip=192.168.1.*
rpcconnect=192.168.1.* wallet ip address
rpcport=6332
listen=1
daemon=1
server=1
it still wont connect
Topic: [Guide] Dogie's Comprehensive ASICMiner Blade Setup - page 42. (Read 580775 times)
i am trying to solo mine with the blade from the pi
but i keep getting credentials or url is incorrect
any ideas what do i need to check?
but i keep getting credentials or url is incorrect
any ideas what do i need to check?
Are you connecting to your local bitcoind or bitcoin-qt? If so, make sure you have the following lines in bitcoind.conf:
server=1
rpcuser=
rpcpassword=
i am trying to solo mine with the blade from the pi
but i keep getting credentials or url is incorrect
any ideas what do i need to check?
but i keep getting credentials or url is incorrect
any ideas what do i need to check?
In this video he uses 8.8.8.8 for DNS stuff. I tried that now too.
https://www.youtube.com/watch?v=XSbs35W8eqA
You were right about taking off the http stuff like this guy did
https://www.youtube.com/watch?v=XSbs35W8eqA
You were right about taking off the http stuff like this guy did
Ya still no go 
Slushes Pool also gives me no activity
8332,8332
http://api.bitcoin.cz:8332,http://api.bitcoin.cz:8332
User:pass,User:pass
8332,8332
http://api.bitcoin.cz:8332,http://api.bitcoin.cz:8332
User:pass,User:pass
You should not have the ":
Okay Now I have tried these:
8332,8332
http://api.bitcoin.cz,http://api.bitcoin.cz
8337,8337
http://mining.eligius.st,http://mining.eligius.st
Still Nodda
Again, take out the "http://"
Slushes Pool also gives me no activity
8332,8332
http://api.bitcoin.cz:8332,http://api.bitcoin.cz:8332
User:pass,User:pass
8332,8332
http://api.bitcoin.cz:8332,http://api.bitcoin.cz:8332
User:pass,User:pass
You should not have the ":
Okay Now I have tried these:
8332,8332
http://api.bitcoin.cz,http://api.bitcoin.cz
8337,8337
http://mining.eligius.st,http://mining.eligius.st
Still Nada
Slushes Pool also gives me no activity
8332,8332
http://api.bitcoin.cz:8332,http://api.bitcoin.cz:8332
User:pass,User:pass
8332,8332
http://api.bitcoin.cz:8332,http://api.bitcoin.cz:8332
User:pass,User:pass
You should not have the ":
Okay the Server address fields are not resetting now but no mining is occuring.
is it accepting anything? or is it 0000?
You may have to set up a proxy on a computer on the network.
I already have some Erupter USBs going on BFG miner but I cant seem to get it to use the Blades as well?
I tried to start BFGMiner with the --http-port option but I might be doing it wrong (probably am)
This is my normal Terminal command sudo bfgminer -o stratum+tcp://stratum.mining.eligius.st:3334 -u -p DummyPassword -S all
I tried to start BFGMiner with the --http-port option but I might be doing it wrong (probably am)
This is my normal Terminal command sudo bfgminer -o stratum+tcp://stratum.mining.eligius.st:3334 -u -p DummyPassword -S all
Okay the Server address fields are not resetting now but no mining is occurring.
Does this look right?
http://anonymouse.org/cgi-bin/anon-www.cgi/http://anonymouse.org/cgi-bin/anon-www.cgi/http://anonymouse.org/cgi-bin/anon-www.cgi/http://anonymouse.org/cgi-bin/anon-www.cgi/http://img802.imageshack.us/img802/6636/brug.jpg
Does this look right?
http://anonymouse.org/cgi-bin/anon-www.cgi/http://anonymouse.org/cgi-bin/anon-www.cgi/http://anonymouse.org/cgi-bin/anon-www.cgi/http://anonymouse.org/cgi-bin/anon-www.cgi/http://img802.imageshack.us/img802/6636/brug.jpg
try taking out the http://
Not hashing on either pool without http:// either
Slushes Pool also gives me no activity
8332,8332
http://api.bitcoin.cz:8332,http://api.bitcoin.cz:8332
User:pass,User:pass
8332,8332
http://api.bitcoin.cz:8332,http://api.bitcoin.cz:8332
User:pass,User:pass
Okay the Server address fields are not resetting now but no mining is occurring.
Does this look right?
http://anonymouse.org/cgi-bin/anon-www.cgi/http://img802.imageshack.us/img802/6636/brug.jpg
Does this look right?
http://anonymouse.org/cgi-bin/anon-www.cgi/http://img802.imageshack.us/img802/6636/brug.jpg
try taking out the http://
Okay the Server address fields are not resetting now but no mining is occurring.
Does this look right?
Does this look right?
Okay the Server address fields are not resetting now but no mining is occuring.
is it accepting anything? or is it 0000?
You may have to set up a proxy on a computer on the network.
I have a couple v2 blades that I can't seem to get working. Have a 750w PSU, wired in as described in OP. As soon as I paper clip the 24port on the PSU to power on, LED1 on the blade flashes 4 times then the PSU powers off and won't start up again until I undo and redo the paperclip. I have seen a couple other posters with similar reports, but no resolution. Same behavior on both blades.
Any ideas?
Also, tried 3 different PSUs, including one that is known good (driving current CPU). All same behavior.
Any ideas?
Also, tried 3 different PSUs, including one that is known good (driving current CPU). All same behavior.
Lol, I am gonna quit replying now - looks like I am double-posting 
Jinx, you owe me a soda. lol
Okay the Server address fields are not resetting now but no mining is occurring.
Lol, I am gonna quit replying now - looks like I am double-posting
Thank you both...
so I just repeat the user:pass info twice?
so I just repeat the user:pass info twice?
Yes, with a comma in between, i.e.:
myusername:mypass,myusername:mypass
Thank you both...
so I just repeat the user:pass info twice?
so I just repeat the user:pass info twice?
yes,
user:pass,user:pass
Jump to: