I just use static IP addresses (outside of the DHCP pool).
I would expect that to be an all/nothing thing though. It does not explain partial hash-rates unless the poster above has 4 of 6 cubes working and is mixing them together.
Topic: [Guide] Dogie's Comprehensive ASICMiner Cube Setup [HD] - page 17. (Read 187363 times)
Got any Android wifi devices on the network? Try turning them off.
That is so odd, how do Android devices interfere with the cubes?From a previous post:
It seems that there is an Android on WiFi router problem, It has to do with it ignoring the DHCP lease times.
Full information can be found on theAndroid Open Source Project – Issue Tracker: ”DHCP client ignores lease time”: https://code.google.com/p/android/issues/detail?id=11236
Insure the proxy address is either statically assigned outside the DHCP pool or set to always get the same address from DHCP, this will prevent a new proxy address stopping mining.
I'm not quite sure what you mean, are you talking about changing the computer's IP so the proxy is operating on a new IP? Also not sure if it helps but 5 of the cubes are running through a switch but one cube is plugged directly into the router.
That. See if moving different networking hardware around changes anything. If I were you I'd try to get just one cube working first.
Right now I have 6 cubes but they only run between 20 GH/s and 25 GH/s. They function just fine other than that. I’m currently running a mining proxy for Slush’s Pool but have the same problem. The odd thing is I recently moved and at my last house I was getting the correct hash rates but have had nothing but problems at my new place. I’m running each pair of cubes off of a Corsair TX850M PSU.
Have you tried running two proxies and putting 3 cubes on each?
Got any Android wifi devices on the network? Try turning them off.
Magic. Nah its a known issue with something or other, I forget the exact details
Also try moving about the cubes in relation to the proxy and your router, network switches can sometimes cause problems.Right now I have 6 cubes but they only run between 20 GH/s and 25 GH/s. They function just fine other than that. I’m currently running a mining proxy for Slush’s Pool but have the same problem. The odd thing is I recently moved and at my last house I was getting the correct hash rates but have had nothing but problems at my new place. I’m running each pair of cubes off of a Corsair TX850M PSU.
Have you tried running two proxies and putting 3 cubes on each?
Got any Android wifi devices on the network? Try turning them off.
Magic. Nah its a known issue with something or other, I forget the exact details
Also try moving about the cubes in relation to the proxy and your router, network switches can sometimes cause problems. Right now I have 6 cubes but they only run between 20 GH/s and 25 GH/s. They function just fine other than that. I’m currently running a mining proxy for Slush’s Pool but have the same problem. The odd thing is I recently moved and at my last house I was getting the correct hash rates but have had nothing but problems at my new place. I’m running each pair of cubes off of a Corsair TX850M PSU.
Have you tried running two proxies and putting 3 cubes on each?
Got any Android wifi devices on the network? Try turning them off.
Yea I made the .bat just as in the example, now I am not sure if I am connected to slush, I dont have any shares or unconfirmed earnings, 0 but the worker is hashing. This is what the proxy says:
I made a .bat file as described and then I changed the worker names and paswords in the cube config, but I still have not been able to connect to a pool other than slushs´s
Code:
cd C:\Program Files (x86)\Proxy
mining_proxy.exe -o eu-stratum.btcguild.com -p 3333
for example
I made a .bat file as described and then I changed the worker names and paswords in the cube config, but I still have not been able to connect to a pool other than slushs´s
Right now I have 6 cubes but they only run between 20 GH/s and 25 GH/s. They function just fine other than that. I’m currently running a mining proxy for Slush’s Pool but have the same problem. The odd thing is I recently moved and at my last house I was getting the correct hash rates but have had nothing but problems at my new place. I’m running each pair of cubes off of a Corsair TX850M PSU.
Have you tried running two proxies and putting 3 cubes on each?
Got any Android wifi devices on the network? Try turning them off.
Right now I have 6 cubes but they only run between 20 GH/s and 25 GH/s. They function just fine other than that. I’m currently running a mining proxy for Slush’s Pool but have the same problem. The odd thing is I recently moved and at my last house I was getting the correct hash rates but have had nothing but problems at my new place. I’m running each pair of cubes off of a Corsair TX850M PSU.
Have you tried running two proxies and putting 3 cubes on each?
I went over everything again and I got it to work, thanks
Amazing stuff guys.
ok, now I have set up everything but when I run the proxy I nothing happens on the cube, I have all 0s
"clean jobs=false" in the terminal
Screenshot of cube config page, cmd with ipconfig /all and of proxy. "clean jobs=false" in the terminal
ok, now I have set up everything but when I run the proxy I nothing happens on the cube, I have all 0s
"clean jobs=false" in the terminal
"clean jobs=false" in the terminal
THANKS! I will link to your site
Quote
Is your router on 192.168.1.x?
ahh it is 192.168.2.1in my router manager it looks like the cube has the ip 192.168.2.104 but if I type that in the browser I dont get anything.
Use this line though: IP Address: 192.168.1.1, Subnet Mask: 255.255.255.0, Default Gateway: 192.168.1.254.
Then get to the cube config page and change its IP to 192.168.2.254. Then change your internet back to normal and you'll find the cube at 192.168.2.254
Quote
Is your router on 192.168.1.x?
ahh it is 192.168.2.1in my router manager it looks like the cube has the ip 192.168.2.104 but if I type that in the browser I dont get anything.
no matter what I do I cant get to the config page
I tried 192.168.1.254:8000 192.168.1.254 and I reset the cube to factory settings, none of those helped. Not sure how I can config without connecting.
I tried 192.168.1.254:8000 192.168.1.254 and I reset the cube to factory settings, none of those helped. Not sure how I can config without connecting.
Is your router on 192.168.1.x?
no matter what I do I cant get to the config page
I tried 192.168.1.254:8000 192.168.1.254 and I reset the cube to factory settings, none of those helped. Not sure how I can config without connecting.
I tried 192.168.1.254:8000 192.168.1.254 and I reset the cube to factory settings, none of those helped. Not sure how I can config without connecting.
Is your router on 192.168.1.x?
Jump to: