[Guide] Dogie's Comprehensive Bitmain Antminer S7 Setup [HD] - page 10.

VirosaGITS

legendary

Activity: 1302

Merit: 1068

Quote from: blurrsequence on October 30, 2015, 05:50:35 PM

Well from what I've read plugging in a pcie 6+2 connector into the cpu slot (on the psu) will fry whatever your connecting.

You would have to verify the pinout. If you change the wiring so that +12v go to +12v and ground to ground, there should not be any problem, assuming the cpu socket is on the main rail. Seem risk prone.

I think the best way to save a socket would probably use perif to molex, then use a 2x molex to PCI-e adapter to power the controller.

I would not do this to power a blade.

blurrsequence

newbie

Activity: 6

Merit: 0

Well from what I've read plugging in a pcie 6+2 connector into the cpu slot (on the psu) will fry whatever your connecting.

blurrsequence

newbie

Activity: 6

Merit: 0

Oh, so you can use the outputs labeled for CPU? I haven't plugged it in yet, it is new, just figured i should stick to VGA power points.

VirosaGITS

legendary

Activity: 1302

Merit: 1068

Quote from: blurrsequence on October 29, 2015, 08:21:28 PM

i bought the EVGA 1600 G2 to try out. still waiting on a 6 pin splitter to be shipped in though. it has 9 PCIe slots. so close!

The EVGA 1600 G2 comes with at least 14 PCI-e connectors. My 1300 G2 came with many and also had some 1x6+1x6+2 pins cables too. So you should have plenty of connectors.

Did you get it used? Or did you not count both 6+2 and 6 pin cables?

From stock;
PCIE: 9 x 8pin (6+2), 5 x 6pin = Total would be 14 connectors.

blurrsequence

newbie

Activity: 6

Merit: 0

i bought the EVGA 1600 G2 to try out. still waiting on a 6 pin splitter to be shipped in though. it has 9 PCIe slots. so close!

torepia

full member

Activity: 140

Merit: 100

You could get a EVGA 1600 G2, but its pricey.

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: DRKMSTR on October 28, 2015, 08:58:02 AM

That reminds me, what PSU did you use Dogie? I'm looking at either getting one like yours or doubling up on a Corsair 850 modular psu (it weighs as much as a barge, I love it.).

Mine is on a DPS-2000 but that's more to do with the PSU already being on the right shelf than anything. 2x Corsair CX750Ms is the cheapest but requires 2 additional 2xmolex to PCI-E adapters. There isn't really a sensible single consumer PSU option, so 2x of whatever you can get should be okay.

Quote from: DRKMSTR on October 28, 2015, 08:58:02 AM

Can a single 110V 15A outlet handle this? Thanks for your help!

110 * 15 * 0.8 = sort of but not really. I don't think officially you should be doing that 24/7 but its your decision.

DRKMSTR

member

Activity: 78

Merit: 10

Quote from: dogie on October 27, 2015, 08:58:56 AM

Quote from: farhangian on October 27, 2015, 08:48:36 AM

thanks
http://i58.tinypic.com/ngvw9t.png
http://i62.tinypic.com/2vmzpy9.jpg

Those two images don't line up, they're showing different pools to each other. Also, what PSU are you using?

That reminds me, what PSU did you use Dogie? I'm looking at either getting one like yours or doubling up on a Corsair 850 modular psu (it weighs as much as a barge, I love it.).

Can a single 110V 15A outlet handle this?

Thanks for your help!

-DM

farhangian

newbie

Activity: 4

Merit: 0

I try with 575 , 550 but hw erore is very high and my hashrate is under 4000th/s

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: farhangian on October 27, 2015, 09:06:05 AM

I changed the pool in next image
I buy the psu from bitmaintech
https://bitmaintech.com/productDetail.htm?pid=000201505040743496917U7kGsCm0694

Try 575mhz on the advanced settings page and go back to Antpool.

farhangian

newbie

Activity: 4

Merit: 0

I changed the pool in next image
I buy the psu from bitmaintech
https://bitmaintech.com/productDetail.htm?pid=000201505040743496917U7kGsCm0694

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: farhangian on October 27, 2015, 08:48:36 AM

thanks
http://i58.tinypic.com/ngvw9t.png
http://i62.tinypic.com/2vmzpy9.jpg

Those two images don't line up, they're showing different pools to each other. Also, what PSU are you using?

farhangian

newbie

Activity: 4

Merit: 0

thanks
http://i58.tinypic.com/ngvw9t.png
http://i62.tinypic.com/2vmzpy9.jpg

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: farhangian on October 26, 2015, 01:58:22 AM

Hi
i upgrade firmware for my antminer s7 and now it is worked for only one minute and than alarmed and not mined all asic status is ok network is ok. i reset my device but this problem is not solved. The Acics Tempurture is under 80 C (60 C).
can you help me
my miner is from batch one can you upload me the original firmware?
thanks

Can you post a screenshot of the status and configuration pages?

farhangian

newbie

Activity: 4

Merit: 0

Hi
i upgrade firmware for my antminer s7 and now it is worked for only one minute and than alarmed and not mined all asic status is ok network is ok. i reset my device but this problem is not solved. The Acics Tempurture is under 80 C (60 C).
can you help me
my miner is from batch one can you upload me the original firmware?
thanks

quantumgravity

sr. member

Activity: 476

Merit: 250

Great guide! Thanks!

clgrissom3

legendary

Activity: 1722

Merit: 1032

Carl, aka Sonny :)

Quote from: dogie on October 24, 2015, 07:36:41 PM

Quote from: clgrissom3 on October 24, 2015, 11:21:01 AM

dogie, are you going to test out the S7 firmware updates and let us know the pros and cons? I'm hearing it is giving a slight improvement and less variation in hash rates but I'm leery of upgrading until I know what they might be taking away...

Maybe although firmware is always a tricky area. People come up with the weirdest "it did x y z blew up my machine error rate up 0.00005%" things which makes it hard to tell anyone anything of value when its drowned out by anecdotes.

Usually firmware is released to fix specific problems...does anyone know what this release addresses? Do you have any inside scoop on this one?

dogie

legendary

Activity: 1666

Merit: 1183

dogiecoin.com

Quote from: clgrissom3 on October 24, 2015, 11:21:01 AM

dogie, are you going to test out the S7 firmware updates and let us know the pros and cons? I'm hearing it is giving a slight improvement and less variation in hash rates but I'm leery of upgrading until I know what they might be taking away...

Maybe although firmware is always a tricky area. People come up with the weirdest "it did x y z blew up my machine error rate up 0.00005%" things which makes it hard to tell anyone anything of value when its drowned out by anecdotes.

clgrissom3

legendary

Activity: 1722

Merit: 1032

Carl, aka Sonny :)

dogie, are you going to test out the S7 firmware updates and let us know the pros and cons? I'm hearing it is giving a slight improvement and less variation in hash rates but I'm leery of upgrading until I know what they might be taking away...

bradli

member

Activity: 82

Merit: 10

I ve manage my PSU.
In full hashing - 12.3 V
600- 4700-4750
It s better from before.

Topic: [Guide] Dogie's Comprehensive Bitmain Antminer S7 Setup [HD] - page 10. (Read 76281 times)